• In the Display Type E part, no information is displayed when display without information is selected. Text Display Selection — Display Type C&D— Changing the text display. 1 Enter Text Display Selection mode Using the Control knob, select "DISP" > "TEXT". For the operation method, refer to (page 10). 2 Select the text display part Push the Control knob towards up or down. The cursor (‰) moves to the selected text display part. Select the text Turn the Control knob or push it towards left or right. See (page 13). Upper text display part: Information of condition column "4" is displayed. Middle text display part: Information of condition column "5" is displayed. Lower text display part: Information of condition column "6" is displayed. 3 Exit Text Display Selection mode Press the Control knob. . • When LX-AMP is connected, the item setup by the Display mode of LX-AMP is displayed. • When the music number exceeds 1000, only the last 3 digits of its number are displayed. (KDC-X7006U) • Album name cannot be displayed in WMA file. (KDC-X7006) • Music title, Artist name, and Album name cannot be displayed in WAV file. (KDC-X7006U) • When playing music from iPod or music edited by "Music Editor", the folder name display may show something different such as playlist or artist name depending on the music selection procedure. (KDC-X7006U) • KDC-X7006 does not display the Spectrum analyzer. • Same information cannot be displayed in Upper text display part, Middle text display part and Lower text display part. However, the blank display is able to have multiple selections. • In the upper text display part, alternate information is displayed when display without information is selected. • In the middle text display part, the Kenwood logo is displayed if the contents of the information cannot be displayed. • In the lower text display part, no information is displayed when display without information is selected. 12 | English The text display In Tuner source Station name "SNPS" 34 Frequency "Frequency" 34 Spectrum Analyzer & Clock*1 "Speana/Clock" 456 Clock*1 "Clock" 3 7 Clock*2 "Clock" 34567 Date "Date" 34567 Blank "Blank" 567 Information Display Condition In CD & External disc source Disc title Track title Track number & Play time Disc name Spectrum Analyzer & Clock*1 Clock*1 Clock*2 Date Blank "Disc Title" "Track Title" "P-Time" "DNPS" "Speana/Clock" "Clock" "Clock" "Date" "Blank" 34567 34567 34 34567 456 3 7 34567 34567 567 In Audio file source Information Display Condition In Auxiliary input source Information Display Condition Auxiliary input name "Source Name" 34 Spectrum Analyzer & Clock*1 "Speana/Clock" 456 Clock*1 "Clock" 37 Clock*2 "Clock" 34567 Date "Date" 34567 Blank "Blank" 567 *1 Function of KDC-X7006U. *2 Function of KDC-X7006. Information Display Condition Music title & Artist name "Title/Artist" 34567 Album name & Artist name "Album/Artist" 34567 Folder name "Folder Name" 34567 File name "File Name" 34567 Play time & Music number "P-Time" 34 Spectrum Analyzer & Clock*1 "Speana/Clock" 456 Clock*1 "Clock" 3 7 Clock*2 "Clock" 34567 Date "Date" 34567 Blank "Blank" 567 In Standby Information Display Condition Standby "Source Name" 34 Clock "Clock" 34567 Date "Date" 34567 Blank "Blank" 567 English | 13 General features Station/Disc Naming (SNPS/DNPS) Attaching a title to a Station or CD. 1 Receive/play the station/disc you want to attach a title to . • A title cannot be attached to MD or Audio file media. 2 Enter Menu mode Using the Control knob, select "MENU". For the operation method, refer to (page 10). 3 Select Name set mode Turn the Control knob. Select the "Name Set" display. 4 Enter Name set mode Press the Control knob for at least 1 second. 5 Move the cursor to the enter character position Push the Control knob towards right or left. 6 Select the character type Press the Control knob. Each time you press the knob, the character type alternates between the types shown in the table below. Character type Alphabet upper case Alphabet lower case Numbers and symbols Special characters (Accent characters) 7 Select the characters Turn the Control knob or push it towards up or down. . • Enter characters by using a remote control with numbers buttons. Example: If you are entering "DANCE". Character Button Times pressed "D" [3] 1 "A" [2] 1 "N" [6] 2 "C" [2] 3 "E" [3] 2 8 Repeat steps 5 through 7 and enter the name. 9 Exit Menu mode Press the [FNC] button. . • When operation stops for 10 seconds the name at that time is registered, and Name Set mode closes. • Memory numbers - FM/AM: 30 stations - Internal CD player: 10 discs -External CD changer/ player: Varies according to the CD changer/ player. Refer to the CD changer/ player manual. • Change the title of station/CD by the same operation used to name it. 14 | English Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Face...
)
