Войти:
Оценок - 1, средний балл: 5 ( )

Инструкция по эксплуатации Kenwood, модель KDC-W9027

Производитель: Kenwood
Размер: 892.66 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


Each time the [2] — [5] button is pressed the adjustable audio items are switched among ranges of all stage section’s tables on the following pages. 1st section Multi-function key..operation Audio control item [2] "PLII"* Dolby ProLogic II setting [3] "WOW" SRS WOW setting [4] "OFF" OFF setting [5] "FINE" [2] "PNRM" [3] "DIM" [4] "CT-WDTH" Panorama setting Dimension control Center width control [2] "FOCUS" [3] "TruBass-F" [3] "TruBass-R" [4] "SRS 3D" FOCUS setting SRS TruBass Front setting SRS TruBass Rear setting SRS 3D setting • When you select the "MUSIC" using "PLII", you can set the "PNRM", "DIM" and "CT-WDTH" using the "FINE" function. Also, when you select the "WOW", you can set the "FOCUS", "TruBass-F/TruBass-R", and "SRS 3D" using the "FINE" function. 1 - 6 NEXT SRC 4 . English | 27 [2] "PLII" "MUSIC" (Music) [5] "FINE" "MOVIE" (Movie) "MATRIX" (Matrix) [2] "PNRM" [3] "DIM" [4] "CT-WDTH" [3] "WOW" "LOW" (Low) [5] "FINE" "MIDDLE" (Middle) "HIGH" (High) [2] "FOCUS" [3] "TruBass-F" [3] "TruBass-R" "USER" (User) [4] "SRS 3D" 2nd section Multi-function key..operation Audio control item [2] "POSI" Position setting [3] "BL/F" [3] "BL" [3] "F" Balance setting Fader setting [4] "VOFF" Volume offset [5] "SW"*2 [5] "SW LEVEL" [5] "PHASE" Subwoofer level Subwoofer Phase setting • Volume offset: Each source’s volume can be set as a difference from the basic volume. • *2 You can control this item when 'Subwoofer Output' (page 25) is set to "SUB WOOFER ON". Note that you can control it only when "SP-LEV" is set to any item other than "None" by 'Audio Setup (Easy mode)' (page28). 6 Adjust the Audio Control item Press the [4] or [.] button. Each time the button is pressed the setting switches as shown below. 1st section Audio Control Item Range Dolby ProLogic II setting* MUSIC/ MOVIE/ MATRIX SRS WOW setting LOW/ MIDDLE/ HIGH/ USER OFF setting Through/ Bypass Panorama setting ON/ OFF Dimension control R3 — R1/ Neutral/ F1 — F3 Center width control 0 — 7 FOCUS setting OFF/ 1 — 9 SRS TruBass Front setting SRS TruBass Rear setting OFF/ 1 — 4 SRS 3D setting OFF/ 1 — 4 2nd section Audio Control Item Range Position setting ALL/ Front-L/ Front-R/ Front Balance setting L15 — R15 Fader setting R15 — F15 Volume offset -8 — 0 Subwoofer level -10 — +10 Subwoofer Phase setting Normal/ Reverse • * Function of the KDC-PSW9527 • The Adjustment item can also be controlled by the rotary volume knob. Refer to 'Rotary Volume knob operation mode select' (page 13). • When the 'Dual Zone System' (page 24) is ON, each of the following setup is ignored. - "WOW"/ "PLII"/ "POSI"/ "PHASE" • WOW: TruBass, FOCUS and SRS 3D are all set to values shown below. WOW FOCUS TruBass SRS 3D HIGH 8 4 4 MIDDLE 6 3 2 LOW 3 2 1 • FOCUS: Adjusts the sound image by changing the vertical position of the speakers virtually and increases or decreases the soundscape. • TruBass: ..Assisting the playback for the super bass sound. • SRS 3D: Making a natural 3D sound field. • SRS 3D cannot be set in tuner source. • The Dimension Control can be set only when the rear speaker is ON. • The Center Width Control can be set only when the center speaker is ON. • Before you set the "TruBass-F"/ "TruBass-R" to get the best sound, set the speaker size using the 'Audio Setup (Easy mode)' (page 28) function. Refer to 'Notes on Sound Management System' (page 11). 7 Exit Audio Control mode Press the [6] ("RTN") button. 28 | English Sound management features Function of the KDC-PSW9527/KDC-W9027 Audio Setup (Easy mode) 1 Selects the Easy mode of Audio setup See the 'Audio Setup' (page 50) and select "Audio Setup: Easy". 2 Select the source for adjustment Press the [SRC] button. 3 Select the key function section Press the [NEXT] button. Repeatedly press the button until "AD SET" is displayed above the [3] button. Refer to 'Notes on Multi-function Key System' (page 10). 4 Enter Audio Setup mode Press the [3] ("AD SET") button. 5 Select the Audio Setup item for adjustment Press the [2] — [5] button. Each time the [2] — [5] button is pressed the adjustable audio items are switched among ranges of all stage section’s tables on the following pages. Function of the KDC-W9027 Multi-function key..operation Audio setup item [2] "CABIN" Cabin setting [3] "SP-SEL" [2] "FRONT" [3] "REAR" [4] "SW" Speaker select Front Speaker select Rear Speaker select Subwoofer [4] "SP-LEV" [2] "FRONT" [3] "REAR" [4] "SW" [5] "T-TONE"* [2] "Front-L" [2] "Front-R" [3] "Rear-L" [3] "Rear-R" Speaker level Front Left Speaker level Front Right Speaker level Rear Left Speaker level Rear Right Speaker level Subwoofer Speaker level Test tone [5] "CALL" [2] "USER" [3] "INST" Call User Call Insttaller Function of the KDC-PSW9527 Multi-function key..operation Audio setup item [2] "CABIN" Cabin setting [3] "SP-SEL" [2] "FRONT" [3] "REAR" [4] "CNTR" [5] "SW" Speaker select Front Speaker select Rear Speaker select Center Speaker select Subwoofer [4] "SP-LEV" [2] "FRONT" [3] "REAR" [4] "CT/SW" [5] "T-TONE"* [2] "Front-L" [2] "...

Эта инструкция также подходит к моделям:
Автомагнитолы - KDC-PSW9527 (892.66 kb)
Автомагнитолы - KDC-W8027 (892.66 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории