Инструкция по эксплуатации Kenwood, модель KDC-W3534
Производитель: KenwoodРазмер: 545.84 kbНазвание файла:
Язык инструкции:
Перейти к скачиванию
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Decreasing Volume Turn the [VOL] knob counterclockwise. Attenuator Turning the volume down quickly. Press the [ATT] button. Each time you press the button, the Attenuator turns ON and OFF. When the Attenuator is ON, the "ATT" indicator blinks. Power Turning ON the Power Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second. Selecting the Source Press the [SRC] button. Source required Display Tuner "TUNER" CD "CD" Standby (Illumination only mode) "STANDBY" • This unit automatically turns full power OFF after 20 minutes lapses in Standby mode in order to save the vehicle's battery. The time until full power OFF can be set in (page 23). 8 | English System Q Selecting the best sound setting preset for different types of music. 1 Select the source to set Press the [SRC] button. 2 Select the Sound type Press the [Q] button. When you press the button once, the current sound setting is displayed. Each time you press the button, the sound setting alternates. Sound setting Display Natural "NATURAL" Rock "ROCK" Pops "POPS" Easy "EASY" Top 40 "TOP40" Jazz "JAZZ" • Change each setting value with the (page 10). First, select the speaker type with the Speaker setting. • When the value is set up by (page 9), "USER" is displayed. Audio Control 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Control mode Press the [VOL] knob. 3 Select the Audio item to adjust Press the [VOL] knob. Each time you press the knob, the item to be adjusted alternates between the items shown in the table below. 4 Adjust the Audio item Turn the [VOL] knob. Bass level "BAS L" –8 — +8 Middle level "MID L" –8 — +8 Treble level "TRE L" –8 — +8 Balance "BAL" Left 15 — Right 15 Fader "FAD" Rear 15 — Front 15 Adjustment Item Display Range Exit Audio Control mode (Volume control mode) 5 Exit Audio Control mode Press any button. Press a button other than the [VOL] knob, [SRC], [0] and [ATT] button. English | 9 General features Audio Setup Setting the Sound system, such as Volume offset and Loudness. 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 3 Select the Audio Setup item to adjust Press the [VOL] knob. Each time you press the knob, the item to be adjusted alternates between the items shown in the table below. 4 Adjust the Audio setup item Turn the [VOL] knob. Adjustment Item Display Range Volume offset "V-OFF" –8 — ±0 Loudness "LOUD" ON/OFF • Volume offset: Sets each source’s volume as a difference from the basic volume. • Loudness: Compensates for low and high tones during low volume. When Loudness is ON, "LOUD" indicator is ON. 5 Exit Audio Setup mode Press the [VOL] knob for at least 1 second. Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Speaker Setting mode Press the [VOL] knob. 3 Select the Speaker type Turn the [VOL] knob. Each time you turn the knob, the setting alternates between the settings shown in the table below. Speaker type Display OFF "SP OFF" For 5 & 4 in. speaker "SP 5/4" For 6 & 6x9 in. speaker "SP 6*9/6" For the OEM speaker "SP OEM" 4 Exit Speaker Setting mode Press the [VOL] knob. Switching Display Changing the information displayed. 1 Enter Switching Display mode Press the Control knob for at least 1 second. "DISP SEL" is displayed. 2 Select the Display item Push the Control knob towards [4] or [.]. In Tuner source Program Service name or Frequency "FREQ/PS" (FM) Frequency (MW, LW) "FREQ" Clock "CLOCK" In CD source Information Display Disc title "D-TITLE"* Track title "T-TITLE"* Track number & Play time "P-TIME" Clock "CLOCK" In Audio file source Information Display Song title & Artist name "TITLE"* Album name & Artist name "ALBUM"* Folder name "FOLDER" File name "FILE" Track number & Play time "P-TIME" Clock "CLOCK" Information Display 10 | English In Standby Information Display Source name "SRC NAME" Clock "CLOCK" 3 Exit Switching Display mode Press the Control knob. • * If the contents of the information cannot be displayed, Play time is displayed. • Album name cannot be displayed in WMA file. Dimmer Control You can lower the brightness of the display by using the dimmer function. Press the [DIM] button for at least 1 second. Each time you press the button for 1 second, the Dimmer control turns ON or OFF. When the Dimmer control is ON, "DIM ON" is displayed. Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate Press the Release button. The faceplate unlocks, allowing you to detach it. • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. • Keep the faceplate in its faceplate case while detached. • Do not expose the faceplate (and the faceplate case) to direct sunlight or excessive heat or humidity. Also av...
Напишите ваш отзыв об устройстве
)
