Войти:
Оценок - 3, средний балл: 4 ( )

Инструкция по эксплуатации Kenwood, модель KDC-PSW9524

Производитель: Kenwood
Размер: 2.53 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


For example, you can enter the Display Control Mode or turn ON/OFF the Random Play by pressing the [3] button during CD play. Setting each function The function display will show the controllable function of the [2] — [5] button above the button. Pressing the [2] — [5] button below the desired function enables the setting of the function. Displaying the desired function If five or more functions are available to be set with the [2] — [5] button, they are divided into multiple function groups (referred to as sections in this manual) for registration. Press the [NEXT] button to switch the sections. If the display of the desired function is not shown, press the [NEXT] button 1 to 3 times to switch the sections until the wanted function display is shown. Example: Function display of CD & External disc source "M.RDM", "H-F" or "SYNC" are displayed when an optional accessory is connected. Real operational example of the Multi-function Key System Example: Turning ON/OFF the Random Play during CD play. 1. Show the function display of the Random Play. If "RDM" is not shown in the display, press the [NEXT] button to switch the sections until the "RDM" function display is shown above the [3] button. 2. Turn ON/OFF the Random Play. Press the [3] button. Each time the [3] button under the "RDM" function display is pressed the Random Play is turned ON/OFF. .. — 8 — About CDs About CDs • Don’t touch the recording surface of the CD. Clean from the center of the disc and move • Don’t place them in direct sunlight (On the outward. seat or dashboard etc.) and where the temperature is high. • Store CDs in their cases. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don’t stick tape etc. on the CD. Also, don’t use a CD with tape stuck on it. When using a new CD If the CD center hole or outside rim has burrs, use it after removing them with a ball pen etc. Burrs Burrs CD accessories Don’t use disc type Removing CDs When removing CDs from this unit pull them out horizontally. CDs that can’t be used • CDs that aren’t round can’t be used. • CDs with coloring on the recording surface or that are dirty can’t be used. • This unit can only play the CDs with . It may not correctly play disks which do not the mark. • A CD-R or CD-RW that hasn’t been finalized can’t be played. (For the finalization refer to your CD-R/CD-RW and your CD-R/CD-RW recorder manual.) — 9— Press the [SRC] button. Source required Display Tuner "TUNER" CD "CD" External disc (Optional accessory) "DISC CH"/"DISC" Auxiliary input (Optional accessory) "AUX1" Standby (Illumination only mode) "ALL OFF" This unit automatically turns full power OFF after 20 minutes lapses in Standby mode in order to save the vehicles battery. The time until full power OFF can be set in (page 49). Selecting the Source Turning ON the Power Turn the vehicle ignition ON. The panel appears. Turing OFF the Power Turn the vehicle ignition OFF. The panel hides. Do not apply force to the panel during operation. It can cause damage. When the power is ON, the (page 43) is displayed as "CODE ON" or "CODE OFF". Power General features — 10 — English NAME.S NF RTN NEXT DAB SRC NAME.S/ SCRL ATT VOLUME CONTROL 2-5 RTN Q NF/ AM FM NEXT 4 . KDC-PSW9524 KDC-8024 V olume Volume Turn the [VOLUME CONTROL] knob clockwise. Decreasing Volume Turn the [VOLUME CONTROL] knob counterclockwise. Attenuator Turning the volume down quickly. Press the [ATT] button. Each time the button is pressed the Attenuator turns ON or OFF. When it’s ON, "ATT ON" is displayed. Adjustment Item Button Display The panel tilts upwards [2] "ANG– " The panel tilts downwards [3] "ANG+ " The panel slides backward [4] "SLD– " The panel slides forward [5] "SLD+ " 4 Exit Panel Position Setting mode Press the [RTN] button. The control panel may be interfered with the shift lever or another part depending on the angles of the control panel. Set the angle to avoid any interference. No sound is produced while the panel is operating. Panel Position Setting Setting the angle or back-forward position of the 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "PNL" button. 2 Enter Panel Position Setting mode Press the [4] ("PNL") button. 3 Select the item for adjustment Press the desired [2] — [5] button. Each time the button switch as shown below. — 11 — General features General features Speaker Setting English You can recall the best sound setting preset for different types of music. 1 Select the source to set Press the [SRC] button. 2 Select the Sound type Press the [Q] button. Each time the button is pressed the sound setting switches. Sound setting Display SRS WOW "SRS WOW" Flat "FLAT" User memory "User Preset" Rock "ROCK" Pops "POPS" Easy "EASY" Top 40 "TOP40" Jazz "JAZZ" • User memory: The values set on the


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории