Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
NOTE Use the CD changer with its door closed to prevent the entry of dust into the changer. 6 Magazine ejection "0" (EJECT) 2CAUTION •Take care to insert trays into the correct grooves in the disc magazine and to insert discs properly into the tray grooves. Otherwise malfunction may occur or the disc may be damaged. • Insert all trays even when some of them do not carry discs. Otherwire malfunction or operation failure may occur. • 8-cm discs cannot be used. If an 8-cm disc adapter is used, the disc cannot be ejected. ' O - N O - N Open the CD changer door, and press the "0"(EJECT) button. NOTE Be sure to open the door completely before pressing the "0"(EJECT) button. If the door is not completely open, the magazine may hit the door and cause damage of malfunction. Open the CD changer door. Operation English Operate the KDC-C20V using the connected control unit. Operation is the same for the CD changer. (For details, refer to the control unit's disc control/CD changer mode.) NOTE •With some video CD’s, the track number may differ from the jacket display,or may differ from the track number display on the menu screen. • Depending on the disc, unwanted noise may be present in the sound. 2CAUTION •Your CD player can play version 2.0 discs. However, the PBC (Play Back Control) function will not operate. •Depending on the recording status, it may prove impossible to play certain VCDs Troubleshooting Guide ¦ Switching the multiple audio mode The audio output mode switches in the following order when the included multiple audio selector switch is pressed while playing CDs: 3 L + R 3 L + L 3 R + R NOTE The audio output mode switches back to "L + R" when the control unit's source mode is switched or the power is turned off. PROBLEM POSSIBLE CAUSE SOLUTION The disc changer mode No cable has been connected to Connect the cable to the disc cannot be selected. the disc changer input terminal on changer input terminal on the unit. the unit. The specified disc does not • The specified CD is very dirty. • Clean the CD. play, but another one plays • The CD is upside-down. • Load the CD with the labelled instead. side up. • The disc is loaded in a different • Eject the disc magazine and check slot from that specified. the number for the specified disc. • The disc is severely scratched. •Try another disc instead. The picture and sound skips. • Something is touching the disc changer. • The CD is scratched or dirty. • The unit is mounted at a slant. • Changer unit is mounted in an unstable place. • The angle adjustment switches are set improperly. • Remove whatever is touching it. • If skipping happens at the same place when the car is stopped, something is wrong with the CD. Clean the CD. • Mount the unit so that is level. • Mount the unit in a stable place. • Set the angle adjustment switches to the correct positions. The display shows that the The computer chip in the unit is Press the reset button on the changer is being played, but not functioning normally. Control unit . no sound can be heard. The specified track does not Random play or magazine random Turn off the random play or play. play has been selected. magazine random play function. The disc changer mode The O-N selection switch of the Set the O-N selection switch to "O" cannot be selected. disc changer is not set properly. position. When removing the CD changer, be sure to first eject a magazine then unplug the changer cord. Do not forget to attach the transportation screws before transporting the CD changer. The CD changer may be damaged during transport if a magazine or CD is left inside it or the transportation screws are not attached. 8 Specifications Specifications subject to change without notice. Laser diode ..................................................................................................GaAlAs (.=780 nm) Digital Filter..............................................................................................8 Time Over Sampling D/A Converter ............................................................................................................3 Level .. Spindle speed.............................................................................................500 ~ 200 rpm (CLV) Wow & Flutter......................................................................................Below Measurable Limit Frequency Response (±1 dB)...............................................................................5 Hz ~ 20 kHz Total harmonic distortion (1 kHz) ...................................................................................0.005 % Signal to Noise Ratio........................................................................................................100 dB Dynamic range ...................................................................................................................95 dB Channel separation.............................................................................................................90 dB Vide...