“Settings” > “Detailed Settings” > “PIN Code Edit” To select the item, turn the Control knob. To determine the item, press the Control knob. 4 Input the PIN code and then press the Control knob. If “Completed” is displayed, registration is completed. 5 Go through the procedure of (page 44) and complete the registration (pairing). Cancelling Bluetooth mode Press the [SRC] button. Operation type Operation Select the numbers. Turn the Control knob. Move to the next digit. Push the Control knob towards right. Delete the last digit. Push the Control knob towards left. Transmit the PIN code. Press the Control knob. If “Completed” is displayed, registration is complete. 5 Exit Bluetooth mode Press the [SRC] button. . • If the device name is not in the list, select “Other Phones”. . • By default, “0000” is specified. • A PIN code can be specified with up to eight digits. English | 45 Function of KDC-BT51U, KCA-BT300/BT200 (Optional Accessory) Bluetooth setup Downloading the Phone book Download the phone book data from the cellphone to this unit so that you can use the Phone Book of this unit. Downloading automatically If the cell-phone supports a phone book synchronization function, the phone book is downloaded automatically after Bluetooth connection. downloading manually. Downloading from the cell-phone manually 1 Operate the cell-phone to end the hands-free connection. 2 Operate the cell-phone to send the phone book data to this unit By operating the cell-phone, download the phone book data to this unit. • During downloading: “Downloading” is displayed. • After completion of downloading: “Completed” is displayed. 3 Operate the cell-phone to start the hands-free connection. Clearing the downloading completion message Press any button. Selecting the Bluetooth device you wish to connect When two or more Bluetooth devices have already been registered, you need to select the Bluetooth device you wish to use. 1 Enter Bluetooth mode KDC-BT51U Press the [ ] button. KDC-5751SD KDC-5051U . • Setting on the cell-phone may be required. • If no phone book data is found in the unit even after the “Completed” is displayed, your cell-phone may not support Press the [LOG] button for at least 1 second. “BT MODE” is displayed. 2 Enter Function setting mode Press the Control knob for at least 1 second. automatic download of phone book data. In this case, try 3 Select Bluetooth device selection mode The item can be selected and determined as follows. “Settings” > “Pairing” > “Phone Selection” (to select the cell-phone) or “Audio Selection” (to select the audio player) To select the item, turn the Control knob. To determine the item, press the Control knob. “(name)” is displayed. 4 Select a desired Bluetooth device Turn the Control knob to select Bluetooth device name, and then press the Control knob. ‘.(name)’ or ‘-(name)’ is displayed. “.”: The selected Bluetooth device is busy. “-”: The selected Bluetooth device is on standby. “ “ (blank): The Bluetooth device is deselected. 5 Exit Bluetooth mode Press the [SRC] button. . • Up to 1000 phone numbers can be registered for each . registered cell-phone. • If a cell-phone is already selected, deselect it, and then • Up to 32 digits can be registered for each phone number select a different one. along with up to 50* characters representing a name. • If you cannot select a device using the audio player, (* 50: Number of alphabetic alphabetical characters. connect the device with the audio player. Fewer characters can be input depending on the type of characters.) • To cancel downloading of the phone book data, operate the cell-phone. Deleting a registered Bluetooth device You can delete a registered Bluetooth device. 1 Enter Bluetooth mode KDC-BT51U Press the [ ] button. KDC-5751SD KDC-5051U Press the [LOG] button for at least 1 second. “BT MODE” is displayed. 2 Enter Function setting mode Press the Control knob for at least 1 second. 3 Select Bluetooth device deletion mode The item can be selected and determined as follows. “Settings” > “Pairing” > “Device Delete” To select the item, turn the Control knob. To determine the item, press the Control knob. Device name is displayed. 4 Delete the selected Bluetooth device Turn the Control knob to select device name, and then press the Control knob. 5 Turn the Control knob to select “YES”, and then press the Control knob. “Completed” is displayed. 6 Exit Bluetooth mode Press the [SRC] button. . • When a registered cell-phone is deleted, its Phone Book, log, SMS, and voice tag are also deleted. Displaying the firmware version Display the version of the firmware of this unit. 1 Enter Bluetooth mode KDC-BT51U Press the [ ] button. KDC-5751SD KDC-5051U Press the [LOG] button for at least 1 second. “BT MODE” is displayed. 2 Enter Function setting mode Press the Control knob for at least 1 second. 3 Select Bluetooth firmware update mode The item can be selected and determined as follows. “Settings” > “Detailed Settings...
)
