Оценок - 3, средний балл: 4.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Important to know... ¦¦To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. ¦¦Caution: Adjust the volume so that you can hear the sound outside the car. Driving with the volume adjusted to a too high level may cause an accident. ¦¦Condensation: When the car is air- conditioned, moisture may collect on the laser lens. This may cause disc read errors. In this case, remove the disc and wait for the moisture to evaporate. ¦¦The illustrations in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the illustrations may differ from what appears on the actual equipment. ¦¦If you experience problems during installation, consult your Kenwood dealer. ¦¦When you purchase external components, check with your Kenwood dealer to make sure that they work with your model and in your area. Maintenance Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to observe this precaution may result in damage to the monitor or unit. Cleaning the connector: The unit may not function properly if the connector between the unit and faceplate are dirty. Detach the faceplate and clean the connector with a cotton swab gently, being careful not to damage the connector. Connector (on the reverse side of the faceplate) Preparation How to attach/detach the faceplate 2 1 12 ¦¦Do not expose the faceplate to direct sunlight, excessive heat, or humidity. Also avoid places with too much dust or the possibility of water splashing. ¦¦Keep the faceplate in its casing while detached. ¦¦The faceplate is a precision component of the unit and can be damaged by shocks or jolts. ¦¦To prevent deterioration, do not touch the terminals of the unit and faceplate with your fingers. How to reset your unit 312 If this unit fails to operate properly, press the reset button. The unit returns to the factory settings when the reset button is pressed. Reset button Remote controller KDC-BT42U can also be remotely controlled with an optionally purchased remote controller. 2 English CONTENTS ¦¦The “AAC” logo is a trademark of Dolby Laboratories. ¦¦The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners. ¦¦“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. ¦¦iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. ¦¦“Adobe Reader” is a trademark of Adobe Systems Incorporated. English 3 4 English English 5 CONTENTS Basic Operations VOICE PAR iPod Loading slot Ejects the disc Volume knob Detaches the faceplate Display window KDC-BT42U KDC-BT32U USB terminal Auxiliary input jack The following indicator lights up when... ST: A stereo broadcast is received. RDS: Radio Data System service is available. TI: Traffic Information function is turned on. IN: A disc is in the unit. EQ: [PRESET EQ] is set to an EQ mode other than [NATURAL]. (page 22) B.BOOST: [BASS BOOST] is set to [LV1], [LV2] or [LV3]. (page 22) : Indicates that the Music Search mode is selected now. BT: Bluetooth cell-phone connection status. The illustration and button names used for explanation in this manual are of KDC-BT42U (unless mentioned otherwise). Refer to the table below for the difference: KDC-BT42U iPod KDC-BT32U iPod Slide open the cover When you press or hold the following button(s)... Main unit General operation SRC ¦¦Turns on. ¦¦Turns off if pressed and held. ¦¦Selects the available sources (TUNER, BT AUDIO, USB or iPod, CD, AUX, STANDBY), if the power is turned on. • If the source is ready, playback also starts. • “iPod” and “CD” are selectable only when an iPod is connected or a disc is loaded. Volume knob (turn) ¦¦Adjusts the volume level. ¦¦Selects items. Volume knob (press) ¦¦Confirms selection. ¦¦Enters [FUNCTION] settings. ¦¦Start voice recognize of c...
Эта инструкция также подходит к моделям:Автомагнитолы - KDC-BT42U (3.22 mb)