Войти:
Оценок - 3, средний балл: 4.3 ( )

Инструкция по эксплуатации Kenwood, модель KDC-5023R

Производитель: Kenwood
Размер: 2.54 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


] button. Adjustment Item Display Range Bass level "Bass"/ "BAS" –8 — +8 Middle level "Middle"/ "MID" –8 — +8 Treble level "Treble"/ "TRE" –8 — +8 Balance "Balance"/ "BAL" Left 15 — Right 15 Fader "Fader"/ "FAD" Rear 15 — Front 15 Non-Fading level* "NF Level" –15 — +15 Front/Rear High Pass "HPF" Through/100/125/170 Filter* Hz Non-Fading "LPF NF" 50/80/120/Through Hz Low Pass Filter* Volume offset "V-Offset"/ "V-OFF" –8 — ± 0 Loudness "LOUD" ON/OFF • Volume offset: Each source's volume can be set as a difference from the basic volume. • Loudness: Compensating for low and high tones during low volume. •* Function of the KDC-MPV7023/6023 5 Exit Audio Control mode Press the [AUD] button. — 9— General General Speaker Setting Fine-tuning so that the speaker type. 1 Enter Standby Press the [SRC] button. Select the "ALL OFF" display. 2 Enter Speaker Setting mode Press the [System Q] button. 3 Select the Speaker type Press the [ 4] or [ . ] button. Each time the button is pressed the setting switches below. Speaker type Display OFF "SP OFF" For 5 & 4 in. speaker "SP 5/4Inch"/ "SP 5/4" For 6 & 6x9 in. speaker "SP 6*9/6Inch"/ "SP 6*9/6" For the OEM speaker "SP O.E.M."/ "SP OEM" 4 Exit Speaker Setting mode Press the [System Q] button. Switching Display Switching the information displayed. Press the [DISP] button. Each time the button is pressed the display switches as shown below. In Tuner source Information Display Station name "SNPS" (KDC-MPV7023/6023/5023 Radio text, Program Service "R-TEXT" or Frequency (KDC-5023R only) Frequency "BAND+FREQ"/ "BAND+F" (KDC-MPV7023/6023/5023 only) Clock The frequency is displayed during Program name reception (KDC-5023R only) Press the [DISP] button for at least 1 second. The frequency for the RDS station will be displayed 5 seconds instead of the Program Service name. In CD & External disc source KDC-MPV7023/6023 : Information Display Disc title (In External disc source or "D-TITLE" KDC-MPV7023 internal CD source) Track title (In External disc source or "T-TITLE" KDC-MPV7023 internal CD source) Track number & Play time "P-Time" Disc name "DNPS" Clock KDC-5023R/5023 : Information Display Disc title (In External disc source) "D-TITLE" Track title (In External disc source) "T-TITLE" Track number & Play time "P-TIME" Disc name "DNPS" Clock — 10 — In MP3 source In MP3 source Song title & Artist name "TITLE" Album name & Artist name "ALBUM" Folder name "FOLDER NAME" File name "FILE NAME" Track number & Play time "P-Time" Disc name "DNPS" Clock In Auxiliary input source Information Auxiliary input name Clock If the Disc title, Track title, Song title & Artist name, or Album name & Artist name is selected when the disc which does not have Disc title, Track title, Song title, Album name, or Artist name is played, track number and play time are displayed. Station/Disc Naming (SNPS/DNPS) Attaching a title to a Station (KDC-MPV7023/6023/5023 only) or CD. 1 Receive/play the station/disc you want to attach a title to • A title can't be attached to a MD. • Refer to the (page 10) and select either "DNPS" or "SNPS". 2 Enter name set mode Press the [NAME.S] button for at least 2 seconds. "NAME SET" is displayed. 3 Move the cursor to the enter character position Press the [ 4] or [ . ] button. 4 Select the character (KDC-MPV7023/ Press the [ 38] button. Each time the button shown below. Character type Alphabet upper case Alphabet lower case Numbers and symbols Special characters (Accent characters) 5 Select the characters Press the [FM] or [AM] button. Characters can be entered by using a remote with a number buttons. Example: If "DANCE" is entered. Character Button Times pressed "D" [3] 1 "A" [2] 1 "N" [6] 2 "C" [2] 3 "E" [3] 2 6 Repeat steps 3 through 5 and enter the name. 7 Exit name set mode Press the [NAME.S] button. • When operation stops for 10 seconds the name at that time is registered, and Name Set mode closes. • Memory numbers - FM: 32 (KDC-MPV7023/ 6023)/ 28 (KDC-5023R/ 5023) stations - AM: 16 (KDC-MPV7023/ 6023)/ 10 (KDC-5023R/ 5023) stations - Internal CD player: 30 (KDC-MPV7023/ 6023)/ 10 (KDC-5023R/ 5023) discs - External CD changer/ player: Varies according to the CD changer/ player. Refer to the CD changer/ player manual. • The title of station/CD can be changed by the same operation used to name it. — 11 — English English Auxiliary Input Theft Deterrent Selecting the display input source. 1 Select Auxiliary input source Press the [SRC] button. Select the "AUX"/ "AUX1" display. 2 Enter Auxiliary input display setting Press the [DISP] button for at least 2 seconds. The presently selected AUX Name is blinks. 3 Select the Auxiliary input display Press the [ 4] or [ . ] button. Each time the button is pressed it switches through displays. • "AUX"/ "AUX1" • "TV" • "VIDEO" • "GAME" • "PORTABLE" • "DVD" 4 Exit Auxiliary input display setting mode Press the [DISP] button. When operation stops for 10 seconds, the name at that time is selected, and Auxiliary input display ...

Эта инструкция также подходит к моделям:
Автомагнитолы - KDC-5023 (2.54 mb)
Автомагнитолы - KDC-6023 (2.54 mb)
Автомагнитолы - KDC-MPV7023 (2.54 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории