Войти:
Оценок - 3, средний балл: 5 ( )

Инструкция по эксплуатации Kenwood, модель KDC-448U

Производитель: Kenwood
Размер: 1.27 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


Select “AUX”, “DVD”, “PORTABLE”, “GAME”, “VIDEO”, or “TV”. 5 Exit Function setting mode Press the [ ] button for at least 1 second. Function of KDC-X595, KDC-448U Muting the audio upon reception of phone call The audio system automatically mutes when a call comes in. When a call comes in “CALL” is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The “CALL” display disappears and the audio system comes back ON. When the call ends Hang up the phone. The “CALL” display disappears and the audio system comes back ON. . • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to (page 12) of Quick start guide. Initial setting Configures initial settings of this unit. 1 Select Standby Press the [SRC] button. Select the “STANDBY” display. 2 Enter Function setting mode Press the Control knob for at least 1 second. 3 Select the Initial setting mode Turn the Control knob to select “Initial Settings”, and then press the Control knob. 4 Select the desired Initial setting item Turn the Control knob to select Initial setting item, and then press the Control knob. “F/W Update #.##” Upgrades the firmware. Selecting “YES” and then pressing Control knob starts upgrading the firmware. For how to update the firmware, access our web site. ( : Factory setting) 5 Set the Initial setting item Turn the Control knob to select desired value, and then press the Control knob. The previous item is displayed. 6 Exit Function setting mode Press the [ ] button for at least 1 second. Display Overview “Initial Settings” “Source Select” Select “2” to change the source selection method. Press the [SRC] button, turn the Control knob to select the source, and then press the Control knob to determine it. 1 / 2 “Key Beep” Setting the operation check sound (beep sound) ON/OFF. “ON” / “OFF” “Function Language” Changes the display language of items in Function setting. “English” / “Francais” / “Espanol” “Built-in AUX” Sets whether to display AUX during source selection. “ON” / “OFF” “CD Read” Sets the method for reading CD. When unable to play special format CD, set this function to “2” to force playing. Note that some music CDs may be unplayable even when set to “2”. In addition, audio files cannot be played when set to “2”. Normally, keep this set to “1”. 1: Automatically distinguishes between audio file disc and music CD when playing disc. 2: Forces playing as music CD. “Built-in AMP” Selecting “OFF” turns off the built-in amplifier. Turning off the built-in amplifier improves the quality of the sound from Preout. “ON” / “OFF” “Speaker Select” Fine-tuning so that the System Q value is optimal when setting the speaker type as follows; “OFF”: OFF “5/4inch”: For 5 & 4 in. speaker “6x9/6inch”: For 6 & 6x9 in. speaker “O.E.M.”: For the OEM speaker English | 33 General operation Demonstration mode Setting Turning the demonstration mode ON/OFF. 1 Enter Function setting mode Press the Control knob for at least 1 second. 2 Select the Demonstration mode Turn the Control knob to select “DEMO Mode”, and then press the Control knob. 3 Set the Demonstration mode Turn the Control knob to select desired value (“ON” or “OFF”), and then press the Control knob. Exit Function setting mode. English | 35 Function of KDC-X895, KDC-BT848U, KCA-BT300/BT200 (Optional Accessory) Operation of hands-free phoning Before use KDC-X895/ KDC-BT848U • If your cell-phone is not yet registered, register (pair) it by referring to (page 8) in the Quick Start Guide or (page 36) in this document. • To register a new cell-phone, you can also refer to (page 36). KDC-X595/ KDC-448U • If your cell-phone is not yet registered, register (pair) it by referring to (page 8) in the Quick Start Guide or (page 46) in this document. . • For details on the Bluetooth cell-phone with the hands-free function, see (page 65). Function of KDC-X895, KDC-BT848U Registering cell-phone 1 Enter Bluetooth mode Press the [ ] button for at least 1 second. If your cell-phone is not yet registered, the search for a cell-phone starts with “Searching” displayed. Paring with new cell-phone Turn the Control knob to select “Device Search”, and then press the Control knob. The search for a cell-phone starts with “Searching” displayed. 2 Select the used cell-phone Turn the Control knob to select cell-phone name, and then press the Control knob. 3 Input the PIN code Operation type Operation Select the numbers. Turn the Control knob. Move to the next digit. Push the Control knob towards right. Delete the last digit. Push the Control knob towards left. Transmit the PIN code. Press the Control knob. Pairing completes with “HF Connect” displayed. . • When any error code is displayed while the paring ...

Эта инструкция также подходит к моделям:
Автомагнитолы - KDC-BT848U (1.27 mb)
Автомагнитолы - KDC-X595 (1.27 mb)
Автомагнитолы - KDC-X895 (1.27 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории