Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Auto) (when the optional accessory TV tuner in connected only) "Auto": Information is displayed for 5 seconds when updated. "Manual": Information is displayed when you touch on the screen. Displays the User I/F 1 screen. t Displays the User I/F 3 screen. y Turns the information display On or Off when a button is touched on the Source Control screen. ( On) u Sets a point display when you touch the screen. ( Pattern1) You can select "Pattern1", "Pattern2" or "Off". i Displays the User I/F 2 screen. Displaying the User I/F 3 screen User I/F 3 screen Key Information Off Marker Pattern1 MENU 181716 English | 63 Touch Panel Adjustment 3 Adjust the positions You can adjust the touch panel operations. 1 Display the Touch Panel Adjust screen Touch the center of left lower and right upper Touch when requested. Touch Prev or If is not shown, touch Nex to display it. MENU Touch Panel Adjust Set 12345111 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Sound Effects Menu. (page 74) 4 Calls the Setup Menu. 5 Allows you to start touch panel adjustment. 2 Start to adjust the touch panel Set ResetCancel12 1 Cancels the adjustment and returns to the Touch Panel Adjust screen. 2 Resets to the initial status. 64 | English Setup Menu Setup Menu Clock You can adjust the clock time. 1 Display the Clock screen Clock Clock Prev If is not shown, touch or Nex to display it. Reset MENU 13:50 OnRDS Synchronize 1 2 3 4 5 1 1 1 6 6 7 9 7 8 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Sound Effects Menu. (page 74) 4 Calls the Setup Menu. 5 Clock time display. KVT-837DVD (24-hour Clock display) KVT-847DVD/867DVD (12-hour Clock display) 6 Adjusts hours. 7 Adjusts minutes. 8 Sets "00" minute. Setup examples: 3:00~3:29 . 3:00 3:30~3:59 . 4:00 9 Sets the clock time in synchronization with the time data sent from the RDS station. ( On) When turned "On", the synchronized mode starts and the clock cannot be adjusted manually. (Function of KVT-837DVD) 2 Adjust the clock time English | 65 Security Code Setup 2 Start the security code registration You can set a security code to protect your receiver system against theft. Set • When the Security Code function is activated it cannot be released. Note, your Security Code is the 4 digit number entered in your "Car Audio Passport" in this package. 1 Display the Security Code Setup screen Security If Security is not shown, touch Prev or Nex to display it. MENU Security code set Set DSI OffOn 1 2 3 4 5 1 1 1 6 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Sound Effects Menu. (page 74) 4 Calls the Setup Menu. 5 Allows you to start security code registration. 6 Turns the DSI function on or off. If turned "On", the burglar alarm lamp flashes when the protection panel is removed. ( On) • If you have already completed the code registration, is not available. Set Enter Cancel PassWord 654 987 0 321 Clear 1 2 3 4 1 Enters the numbers to your security code. 2 Clears your entry. 3Cancels the registration and returns to the Security Code Setup screen. 4 Registers your security code. 3 Enter a security code 0 — 9 Input a four-digit number. 4 Register your security code Enter 5 Reenter the security code Reenter the same security code as that you have entered in Step 3 for confirmation. • If you enter a different security code, the screen returns to Step 3 (for the first code entry). 6 Register the security code again Enter Now, your security code is registered. If you press the Reset button or if you disconnect your receiver from the battery after the code registration, you need to enter the registered security code. See below for details. 66 | English Setup Menu Setup Menu If you have pressed the Reset button or if you have disconnected the Receiver from battery... 1 Enter the correct security code 0 — 9 You must enter the same security code as that you have entered in Step 3 above. 2 Enter the security code Enter Now, you can use your Receiver. • If you enter an incorrect security code, you cannot use your Receiver for a while. (Function of KVT-837DVD) Incorrect entry count Receiver inoperable time 1 – 2 5 minutes 3 1 hour 4 or more 24 hours English | 67 Set Up Memory Audio Set Up and AV Interface settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. 1 Display the Set Up Memory screen Set Up Memory If Set Up Memory is not shown, touch Prev or Nex to display it. MENU Lock Unlock Would You Like to Memorize or Recall the Audio & AV setup? NoYes 3 4 5 2 5 6 6 1 1 1 1 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Sound Effects Menu. (page 74) 4 Calls the Setup Menu. 5 Locks the Audio Set Up and AV Interface settings. When is selected, you cannot set the Lock Audio Set Up and AV Interface settings. 6 Memorizes or re...
Эта инструкция также подходит к моделям:Автомагнитолы - KVT-837DVD (10.06 mb)
Автомагнитолы - KVT-847DVD (10.06 mb)