Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
(page36) Function of the KRC-X858 "Bass EXT" : Switch the Bass Extend mode on/off. Setting values: ON / OFF (When the bass extend mode is set to on, low frequency response is extended by 20%.) NOTE This mode is available only when the Sound coordinate system is on. (page36) — 7— General English Function of the "Tre F" : Adjust the Setting values: 10.0 / NOTE This mode is available only when on. ( page36). "Treble" : Adjust the treble level. Setting values: - 8 – + 8 "Balance" : Adjust the balance level. Setting values: Left 15 – Right 15 Function of the "HPF F" : Adjust the frequency of the High-output. Setting values: Through / 40Hz / 60Hz / 150Hz / 180Hz / 220Hz NOTE You can separately set the high-pass output,including preouts.The high-pass non-fading preout when switching to default settings for front output and rear Function of the KRC-X858 "HPF R" : Adjust the frequency of the High-pass filter for rear output. Setting values: Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz / 150Hz / 180Hz / 220Hz NOTE "Fader" : Adjust the fader level. Setting values: Front 15 – Rear 15 Function of the KRC-X858 "NF Level" : Adjust the Non-fading output level. Setting values: - 15 – + 15 NOTE • This mode is available only when the non-fading output function is set to on.( page10). • Not available during the Dual zone system is on. You can separately set the high-pass filter for front and rear output,including preouts. The high-pass filter works except during non-fading preout when switching to non-fading. The factory default settings for front output and rear output are "Through" . Function of the KRC-X858 "LPF NF" : Adjust the frequency of the Low-pass filter for Non-Fading output. Setting values: 50 Hz / 80 Hz / 120 Hz / Through NOTE • This mode is available only when the non-fading output function is set to on.( page10). • Not available during the Dual zone system is on. — 8— Function of the "NF Phase" : Adjust the phase for Setting values: Normal ) / Reverse (180° ) NOTE • This mode is available only when is set to on.( page10). • Not available during the Dual zone "V OFFSET" : Set the sound level of the each adjusting the level difference between the basic sound level and the required level. Setting values: - 8 – 0 Function of the KRC-X858 Storing your sound settings: Press a preset button (#1-6) for at least two seconds. NOTE • This setting can be made only when the Sound coordinate system is on.( page36). • The settings you can preset are, bass center frequency, bass level, bass quality factor, bass extension, treble center frequency, and treble level. Function of the KRC-X858 Recalling your sound settings: Press a preset button (#1-6) except during the bass center frequency, bass level, bass quality factor, bass extension, treble center frequency, and treble level adjust mode. This mode is available on.( page36). Function of the KRC-708 Mobile Preset This function allows you to adjust with the sound coordinate system, speakers. 1 Press the SRC button repeatedly to select "ALL OFF" is displayed when the standby mode 2 Press the AUD button to enter the mobile preset 3 Press either the 4 or . button to select the type of speaker. The setting switches as follows. OFF / For the OEM speaker / For 6/6x9 in. speaker / For 5/4 in. speaker 4 Press the AUD button to end the mobile preset plan mode. NOTE • This mode is available only when the Sound coordinate system is on. (page36) • When you change the setting of type of speaker, the bass and treble tone settings are returned to original levels. NOTE — 9— General English Switching Display You can change the Changing the Display: Each time you press the follows: Mode display Clock Date NOTE The . indicator lights while the clock is displayed. Function of the KRC-X858 Non-Fading Output You can turn the non-fading output on and off while the preout is switched to the non-fading preout. Turning non-fading output On/Off : Press the NF button for at least one second to set the function ON or OFF. "NF ON" is displayed when the non-fading output is set ON. Hiding the unit Press the SRC button The faceplate will slide you have set in the "Time the menu has passed, the hide the control panel. However, during that period. For details, faceplate" (page12). NOTE • When the closing faceplate is hit by an off without the faceplate closing all the way. and press the SRC button to turn the unit back off again to have it close properly. • While the control panel is moving, pressing the have any effect. Do not try to press the buttons on panel as the faceplate is moving, as excessive force damage the unit. • During the forced closing of the unit (i.e., having the unit closed while ignition is turned on), the faceplate will not open no matter how often the ignition is turned on or off, unless "Manual Open button" at the rear of the faceplate is pressed in order to open it. You can prevent tampering of the unit when letting someone else drive your car by keeping it closed this way. To cancel the ...
Эта инструкция также подходит к моделям:Автомагнитолы - KRC-708 (691.31 kb)