Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
"PTY Found" is displayed for about 30 seconds. If you make no key input in 30 seconds, the PTY mode will turn off automatically. NOTE If no program can be found, "NO PTY" If you want to select another type of 3 above. Switching to Other Stations of Program: When "PTY Found" is displayed, The tuner scans for another program. Canceling Program Function During Press the PTY button. — 14 — Changing Language for Program Type (PTY) Function Tuner features Function of the KRC-789/KRC-689 Changing the display language to another language. 1 Press the PTY button. "PTY" is displayed, and the Program Type Selection (PTY) Mode entered. 2 Enter the Changing Language Mode Press the DISP button to enter the changing language mode. 3 Changing the Display Language Press the FM or AM button. Each time the button is pressed, the display language will change as follows: English German Spanish Swedish French Portuguese Dutch Norwegian 4 Press the DISP button to end the changing language 38 SRC FM AUD SCANB NR B. S/RDM REP MTL/M.RDM PROGPROG LOUD DISP NAME.S PWR OFF AUTO AME Reset button # 1- 6 AUTO DISP/ 4 AM . /AME NAME.S Band display ST indicator Frequency Preset station number AUTO indicator — 15 — English Tuner features Function of the KRC-789/KRC-689 Tuning You can choose from three tuning modes: auto seek, preset station seek, and manual. The AUTO 1 indicator lights up when auto seek tuning is selected, and the AUTO 2 indicator lights when preset station seek tuning is selected. Selecting Tuning Mode: Press the AUTO button. Each time you press the AUTO button, the mode switches as follows. Ў Auto 1 (Auto Seek Tuning) Ў Auto 2 (Preset Station Seek Tuning) Ў Manual (Manual Tuning) Tuning: 1 Press the SRC (source) button repeatedly to select the tuner mode. "TUNER" is displayed when the tuner mode has been selected. 2 Press either the FM or AM button to select the band. Each time you press the FM button, the band switches between the FM1, FM2 and FM3 (which are used of preset stations) . Press the AM button to select the AM band. 3 • Auto Seek Tuning Press the . button to seek higher frequencies. Press the 4 button to seek lower frequencies. • Preset station seek tuning Press the . button to move to the next preset the one with the next highest 4 button to move to the last preset station lowest number). • Manual Tuning Press the . button to increase the Press the 4 button to decrease NOTE The ST indicator received. Station Preset Memory Store the frequency of a station. You can then recall that station with a single touch of a button. 1 Select the band/station that you want to have stored. 2 Press the button (#1-6) that you want to use for the station, for at least two seconds. The button number blinks once in the display to indicate that the data has been stored. Recalling a Preset Station: Press the preset station button (#1-6) for the desired station. The number of the recalled station is displayed. NOTE You can store six stations in each of the FM1, FM2, FM3, and AM bands. Auto Memory Entry You can automatically store all the receivable frequencies the band currently being listened to, and then the touch of a button later. This function is especially useful when you are travelling and do not know available. Up to six frequencies can be stored 1 Select the band for auto memory entry. 2 Press the AME button for at least two seconds to memory entry. The numbers of the preset station When all the stations in a certain memory, the auto memory entry the last station received. Recalling a Preset Press the preset The number of — 16 — Frequency Step Setting Switch the frequency step used in seeks. The factory defaults are 50 kHz for FM and 9 kHz for AM. While pressing buttons #1 and #5 at the same time, press the reset button. The frequency step settings will be changed to 200 kHz for FM and 10 kHz for AM. NOTE When you change the frequency step settings, all memory contents will be erased. Returning Frequency Step Settings to Original Values: Repeat the operation as mentioned above. Station Name Preset (SNPS) You can assign names to radio stations with the Station Preset Memory. Up to 32 FM stations and 16 AM stations can be assigned names. 1 Adjust the frequency to the station whose name you want enter. 2 Press the NAME.S button for at least two seconds. "NAME SET" is displayed once the station name is entered. The cursor will blink in the position where letters 3 Press either the 4 or . button to move the cursor to the desired position. The 4 button moves the cursor to the left, . button to the right. 4 Each time the 38 button is pressed, the characters entered change as listed below. Press the FM or AM button Characters that can be Alphabet (upper case): A ~ Z Alphabet (lower case): a ~ z Numerals and symbols: 0~9 @ ” ‘ ` % & * + - = , . / \ < > [ ] Special characters: aaeeiioouuNC®.‹ fl aaeeiioouunc©.› fi 5 Continue steps 3 and 4 until all the characters are chosen for the name. NOTE You can enter up to eight characters for ...
Эта инструкция также подходит к моделям:Автомагнитолы - KRC-689 (543.84 kb)
Автомагнитолы - KRC-789 (543.84 kb)