Оценок - 4, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
Press button Sound setting Display [#2] Rock "DB ROCK" [#3] Pops "DB POPS" [#4] Jazz "DB JAZZ" [#5] Easy "DB EASY" When the dB(Sound Coordinate) setting is changed, the Bass and Treble set in audio control replace the dB(Sound Coordinate) values. 5 Exit Control mode Audio Control 1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Control mode 3 Select the Audio item for Press the [FM] or [AM] Each time the button switch as shown below. 4 Adjust the Audio Press the [ 4] or [ . ] button. — 6— Adjustment Item Adjustment Item Range Bass level "BAS" –8 — +8 Treble level "TRE" –8 — +8 Balance "BAL" Left 15 — Right 15 Fader "FAD" Rear 15 — Front 15 5 Exit Audio Control mode Press the [AUD] button. Switching Display Switching the information displayed. Press the [CLK] button. Each time the button is pressed the display switches as shown below. In Tuner source Information Frequency Clock In Tape source Information Play side Clock TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON. — 7— English Tuner features English Tuner features Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate Press the Release button. The faceplate is unlocked, allowing you to detach it. • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while detached. • Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Reattaching the Faceplate 1 Align the projections on the unit with the grooves on the faceplate. 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing AUTO/ SRC AME 4 FM . #1 - 6 AM ST indicator Frequency display Preset station number Band display — 8— Tuning Mode Tuning Mode Choose the tuning mode. Press the [AUTO] button. Each time the button is pressed the Tuning mode switches as shown below. Tuning mode Auto seek Display "AUTO 1" Operation Automatic search for a station. Preset station seek Manual "AUTO 2" "MANUAL" Search in order of the stations in the Preset memory. Normal manual tuning control. Putting the station in the memory. 1 Select the band Press the [FM] or [AM] button. 2 Select the frequency to put in the memory Press the [ 4] or [ . ] button. 3 Put the frequency in the memory Press the [#1] — [#6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [#1] — [#6] button. Tuning Auto Memory Entry Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it FM1, FM2, and FM3 bands. Frequency range - FM1: 65.0 MHz — 74.0MHz - FM2, 3: 87.5 MHz — 108.0MHz 3 Tune up or down band Press the [ 4] or [ . ] button. • During reception of • Only monaural reception Putting stations with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Open Auto Memory Entry Press the [AME] button for at least 2 seconds. When 6 stations that can be received are Auto Memory Entry closes. — 9— English English Preset Tuning Calling up the stations in the memory. SRC 0 REW FF 1 Select the band Press the [FM] or [AM] button. 2 Call up the station Press the [#1] — [#6] button. T.CALL Tape indicator — 10 — Playing Cassette Tapes Playing Cassette Tapes When the Cassette Tape is inserted Press the [SRC] button. 4 FM . Select the "TAPE" display. When you want to listen to the reverse side Press the [REW] and [FF] button at the same time. Eject the Cassette Tape Press the [ 0] button. Fast Forwarding and Rewinding AM Fast Forwarding Press the [FF] button. If it's stopped press [REW] button. Rewinding Press the [REW] button. If it's stopped press the [FF] button. MENU mc indicator Tuner Call Switching to the radio automatically Rewinding. Press the [T.CALL] button. Each time the button is pressed Call turns ON or OFF. Menu display When it's ON, "TC ON" is — 11 — English English Menu System Touch Sensor Tone Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Press the [FM] or [AM] button. Example: When you want to set the beep sound select the "BEEP" display. 3 Set the menu item Press the ...
Эта инструкция также подходит к моделям:Автомагнитолы - KRC-2904A (1.04 mb)