For how to select Function Control item, refer to (page 6). 3 Put the Illumination Color Preset in the memory Press the Control knob. “Memory?” is displayed. 4 Turn the Control knob to select “YES”, and then press the Control knob. “Memory Completed” is displayed. 5 Exit Illumination Color Preset mode Press the [FNC] button. . • Register 1 pair of Illumination Color Preset Memory. • If you press the Reset button, the value in the memory will be default setting value of “Illumination Color Selection.” 3. Press the Control knob. Exit the detail color adjustment mode. 4 Exit Key Color Selection mode Press the [FNC] button. . • When you select “PRESET”, you can save the combination of the Illumination Colors selected for each place. For how to save Illumination Colors, refer to (page 10). 10 | DPX503U/DPX303/DPX313 Function of DPX503U Illumination Color Preset Recall Recalling the selection you saved in Illumination Color Preset mode. 1 Enter Audio Preset Recall mode Select “COLOR” > “PRESET” > “RECALL”. For how to select Function Control item, refer to (page 6). 2 Recall the Illumination Color Preset Press the Control knob. “Recall?” is displayed. 3 Turn the Control knob to select “YES”, and then press the Control knob. “Recall Completed” is displayed. 4 Exit Illumination Color Preset Recall mode Press the [FNC] button. . • When you recall Illumination Color Preset, the current Illumination Color settings will be replaced with the preset selection. Disc Naming (DNPS) Attaching a title to a CD. 1 Play the disc you want to attach a name to 2 Select Name set mode item during Menu mode Select the “Name Set” display. For how to select Function Control items, refer to (page 6). 3 Enter Name set mode Press the Control knob for at least 1 second. 4 Enter the name Operation type Operation Move the cursor to the enter Push the Control knob towards right character position or left. Select the character type* Press the Control knob. Select the characters Turn the Control knob or push it towards up or down. * Each time you press the knob, the character type alternates between the types shown in the table below. Character type Alphabet upper case Alphabet lower case Numbers and symbols Special characters (Accent characters) . • Enter characters by using a remote control with numbers buttons. Example: If you are entering “DANCE”. “D” “A” “N” “C” “E” Button [3] [.] [2] [.] [6] [.] [2] [.] [3] 11232 Character Times pressed 5 Exit Menu mode Press the [FNC] button. . • A title cannot be attached to Audio file media. • When operation stops for 10 seconds the name at that time is registered, and Name Set mode closes. • Media that you can attach a name to - Internal CD player: 10 discs -External CD changer/ player: Varies according to the CD changer/ player. Refer to the CD changer/ player manual. • You can change the name of a CD by the same operation you used to name it. English | 11 Display Settings Auxiliary Input Display Setting Selects the display below when changing to Auxiliary input source. 1 Select Auxiliary input display setting item during Menu mode (In AUX mode) Select the “Name Set” display. For how to select Function Control items, refer to (page 6). 2 Enter Auxiliary input display setting mode Press the Control knob for at least 1 second. The presently selected Auxiliary input display is displayed. 3 Select the Auxiliary input display Turn the Control knob or push it towards up or down. “AUX”/ “DVD”/ “PORTABLE”/ “GAME”/ “VIDEO”/ “TV” 4 Exit Auxiliary input display setting mode Press the [FNC] button. . • When operation stops for 10 seconds, the name at that time is registered, and the Auxiliary input display setting mode closes. • The Auxiliary input display can be set only when the built-in auxiliary input or the auxiliary input of optional KCA-S220A is used. On the KCA-S220A, “AUX EXT” is displayed by default. Opening message edit Setting the opening message to be displayed when the power is turned on. 1 Select Opening message edit item during Menu mode Select “OPENING MSGE Edit”. For how to select Function Control items, refer to (page 6). 2 Enter Opening message edit mode Press the Control knob for at least 1 second. 3 Enter the character Operation type Operation Move the cursor to the enter Push the Control knob towards right character position or left. Select the character type* Press the Control knob. Select the characters Turn the Control knob or push it towards up or down. * Each time you press the knob, the character type alternates between the types shown in the table below. Character type Alphabet upper case Alphabet lower case Numbers and symbols 4 Press the Control knob for at least 2 seconds. “Completed” is displayed. 5 Exit Menu mode Press the [FNC] button. . • The Opening message can be displayed up to 8 characters. 12 | DPX503U/DPX303/DPX313 Music disc/Audio file Operati...
)
