2 Select the setting item Push the Control knob towards right or left. Display Setting item “All” Sets the same color for all of items. “Display” Sets the display color. “Key” Sets the button color. “Rotary” Sets the control knob color. 3 Change the color Turn the Control knob. Color setting Display … Scan of Color 1-10 ”V.Scan” Color 1 ”Color 1” … Color 2 ”Color 2” Color 10 ”Color 10” User color ”User” 4 Exit the Illumination color Select mode Press the [COL] button. . • You can adjust the illumination color to your taste using RGB setting. See (page10) for detail. • When illumination effect (I-EFCT) setting (page 14) is “2“, you can not set color. • When illumination effect (I-EFCT) setting (page 14) is “3“, you can select “ALL“ and set “color1” to “10”. English | 9 General Operation User Color Setting Adjust the illumination color with R(Red), G(Green), B(Blue) setting. Adjusted set value is memorized in the of User setting area. 1 Select the item to adjust and select “USER” See step1 to step3 of (page 9) for detail. 2 Enter the RGB adjusting mode Press the Control knob for at least 1 second. 3 Select the color to adjust Push the Control knob towards right or left. Adjust the blinking color. 4 Adjust the RGB Color Turn the Control knob. 5 Exit the RGB adjusting mode Press the Control knob. Display Switching Changing displayed information on each source following; In Tuner source Information Display Frequency “FREQ” Clock “Clock” Graphic “Graphic” In CD & External disc source Information Display Disc title “D-Title” Track title (In External disc source) “T-Title” Play time & Track number “P-Time” Clock “Clock” Graphic “Graphic” In Audio file source Information Display Music title & Artist name “Title” Album name & Artist name “Album” Folder name “Folder” File name “File” Play time & Music number “P-Time” Clock “Clock” Graphic “Graphic” In Tape source Information Display Play time (Tape counter) “Counter” Clock “Clock” Graphic “Graphic” In Standby/ Auxiliary input source Information Display Source name “SRC Name” Clock “Clock” Graphic “Graphic” 1 Enter Switching Display mode Press the [38] button for at least 1 second. “DISP SEL” is displayed. 2 Select the Display item Push the Control knob towards up or down. 3 Exit Switching Display mode Press the [38] button. . • When you select the clock display, the display setting of each source will be changed to the clock display. • If the selected display item does not have any information, alternative information is displayed. 10 | DPX-MP5110U/DPX-MP4110/DPX-MP3110 Tuner Operation Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Push the Control knob towards up or down. 2 Enter Menu mode Press the [M.JOG] button for at least 1 second. “Menu” is displayed. 3 Select the Auto Memory Entry mode Push the Control knob towards up or down. Select the “A-Memory” display. 4 Open Auto Memory Entry Press the Control knob for at least 1 second. When 6 stations that can be received are put in the memory, Auto Memory Entry closes. Function of remote control Direct Access Tuning Entering the frequency and tuning. 1 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote control. “– – – –” is displayed. 2 Enter the frequency Press the number buttons on the remote control. Example: Desired frequency Press button 92.1 MHz (FM) [0], [9], [2], [1] 810 kHz (AM) [0], [8], [1], [0] Cancelling Direct Access Tuning Press the [DIRECT] button on the remote control. . • You can enter the FM band frequency in steps of a minimum of 0.1 MHz. • If you make no button operation for 10 seconds, this function is automatically canceled. Frequency Step Setting Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM band 9 kHz. 1 Turn the power OFF Press the [SRC] button for at least 1 second. 2 Switch the frequency step While pressing the [1] and [5] buttons, press the [SRC] button. Release your fingers from the button after the display appears. The frequency step changes to FM band 200 kHz, and AM band 10 kHz. . • When the same operation is repeated, the frequency step returns to the original setting. • When the frequency step is changed, the frequencies in the memory are deleted. English | 11 Music disc/Audio fi le Operation Play Functions of Disc Changer While a disc in the disc changer is being played, the following play functions can be used. Playing the Current Song or Disc Repeatedly. (Repeat play) Press the [4] button. Pressing the button repeatedly selects Track Repeat play on (“TRAC REP”), Disc Repeat play on (“Disc REP”), and Repeat play off (“REP Off”) sequentially. Randomly plays the music in the disc changer. (Magazine random play) Press the [6] button. Pressing the button toggles the setting between Magazine random play on (“MGZN RDM”) and off (“RDM Off”). Function of remote control Direct Music...
