— 9— English English Adjustment Memory preset Adjusting the effect Control> when type. 2 Select the item for adjustment Press the [FM] or [AM] button. Each time the button is pressed, the items switch as shown below. 3 Adjust the item Press the [ 4] or [ . ] button. Adjustment Item Display Range Bass Center Frequency "Bas F" 60/70/80/100 or 150 Hz Bass level "Bas LV" –12 — +12 dB Bass Q Factor "Bas Q" 1.00/1.25/1.50/2.00 Bass Extend "EXT" On/Off Middle Center Frequency "Mid F" 0.5/1.0/1.5/2.0 kHz Middle level "Mid LV" –12 — +12 dB Middle Q Factor "Mid Q" 1.0/2.0 Treble Center Frequency "Tre F" 10.0/12.5/15.0/17.5 kHz Treble level "Tre LV" –12 — +12 dB • According to the Bass Q Factor setting value, the frequencies that can be set in Bass Center Frequency change as shown below. Bass Q Factor Bass Center Frequency 1.00/1.25/1.50 60/70/80/100 2.00 60/70/80/150 • When the Bass Extend is set to ON, low frequency response is extended by 20%. The (page set the mode to "EQ PRO". 2 Recall the setting value Press the [#1] — [#3] button. Audio Control 1 Enter the Audio Control mode Press the [AUD] button for at least 1 second. "AUD mode" is displayed. 2 Select the Audio item for adjustment Press the [FM] or [AM] button. Each time the button is pressed, the items that can be adjusted switch as shown below. 3 Adjust the Audio item Press the [ 4] or [ . ] button. — 10 — Adjustment Item Adjustment Item Range Balance "BAL" Left 15 — Right 15 Fader "FAD" Rear 15 — Front 15 Non Fader Output "N-F" On/Off 4 Exit the Audio Control mode Press the [AUD] button. DSP System Setting the simulated Sound field effects of Processor. 1 Enter the DSP Control mode Press the [DSP] button. "DSP mode" is displayed. 2 Select the Sound field effects Press the [DSP] button. Each time the button is pressed, the Sound field effects switch as shown below: Sound field effects Display Stadium "Stadium" Concert Hall "Concert" Club "Club" Church "Church" Studio "Studio" Bypass "Bypass" When operation stops for 10 seconds, the DSP Control mode closes. Turn DSP System OFF Press the [DSP] button for at least 1 second. "DSP" indicator is OFF. Spectrum Analyzer Selecting the Spectrum 1 Enter the Spectrum Analyzer Press the [S.A] button for "SPEANA" is displayed. 2 Select the Spectrum Analyzer Press the [S.A] button. Each time the button is pressed, the Spectrum as shown below: Spectrum Analyzer Display Scan of Spectrum Analyzer "S.A Scan" Spectrum Analyzer 1 — 9 "SPEANA 1" — "SPEANA 9" Sea Shore "Seashore" Spectrum Analyzer Off "S.A Off" Scan of Spectrum Analyzer: The display switches from Spectrum Analyzer 1 to 9 and Sea Shore in sequence. 3 Exit the Spectrum Analyzer Select mode Press the [S.A] button for at least 1 second. When operation stops for 10 seconds, Spectrum Analyzer at that time is registered and the Analyzer Select mode automatically closes. — 11 — General General When operation stops English Station/Disc Attaching a title to 1 Receive/play the station/ • A title can't be attached to MD or • Disc Naming can't be done during 2 Enter name set mode Press the [NAME] button for at least "Name Set" is displayed. 3 Move the cursor to the enter character position Press the [ 4] or [ . ] button. 4 Select the character type Press the [ 38] button. Each time the button is pressed the character type switches shown below. Character type registered, and Name • Memory numbers - FM & AM: 30 stations - Internal CD player: 10 discs - External CD changer/ player: Varies according to the CD changer/ player. Refer to the CD changer/ player manual. • The title of station/CD can be changed used to name it. Switching Display Switching the information displayed. Press the [DISP] button. Each time the button is pressed the display switches as shown below. In Tuner source Alphabet upper case Information Display Alphabet lower case Frequency 5 Select the characters Press the [FM] or [AM] button. Characters can be entered by using a remote with a number buttons. Example: If "DANCE" is entered. Character Button #Times pressed Station name "SNPS" Charactor Clock In CD & External disc source Information Display Track number & Track time "P-Time" "D" "A" [#3] [#2] 1 1 Track number & Disc play time Disc name "A-Time" "DNPS" "N" [#6] 2 "C" [#2] 3 "E" [#3] 2 6 Repeat steps 3 through 5 and enter the name. 7 Exit name set mode Press the [NAME] button. — 12 — Disc title (In External disc source or DPX-MP4030 internal CD source) Track title (In External disc source or DPX-MP4030 internal CD source) Charactor Clock "D-Title" "T-Title" In MP3 source Information Track Time Folder name File name Song title & Artist name Album name Charactor...
)
