Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Install the dash panel or adapter plate. Install the trim ring to the unit. Install the control panel to the unit. 1 2 3 4 Bend the claws according to the thickness of the dashboard Control panel 5 4 3 1 26 Control panel 1 2 3 4 5 6 6 Connection diagram Before connecting, make sure that the ignition switch is set to OFF, and remove the battery # terminal to avoid short circuits. 7 BATTERY POWER Antenna DIMMER SWITCH IGNITION SWITCH CONTROL RELAY REMOTE ON (BLUE/WHITE) AMPLIFIER (Optional) PHONE MUTE (ORANGE) DIMMER (PINK) TO IGNITION (RED) GROUND(-) (BLACK) POWER ANTENNA (BLUE) TO BATTERY(+) (YELLOW) 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 B A A A A A A A A 1 2 4 5 6 7 8 1 2 3 4 5 6 7 8 AABB B 11. Violet : Rear Right + B 22. Violet/ Black Stripe : Rear Right – B 33. Gray : Front Right + B 44. Gray / Black Stripe : Front Right – B 55. White : Front Left + B 66. White/Black Stripe : Front Left – B 77. Green : Rear Left + B 88. Green/ Black Stripe : Rear Left – To Speaker To Vehicle (Optional) (Optional) rr A AAFrom antenna B BBTo the wiring of the vehicle colors of leads. • BLACK: This lead is for the ground connection. • ORANGE: This lead is for the phone line connection. • PINK: This lead is for the dimmer line connection. • RED: This lead is for connection to the power supply terminal when the ignition switch is set to ACC. • YELLOW: This lead is for connection to the battery (back-up) terminal from which power is always supplied. • BLUE: This lead is for the power antenna connection. • BLUE/WHITE: This lead is for the remote amplifier on connection. C CCSpeaker Connections L LR R 1 2 3 4 5 6 7 8 REARFRONT FRONT REAR Connecting to Auxiliary Equipment (Optional) Connect the AUDIO OUTPUT jack of this unit to the AUDIO INPUT jack of the Auxiliary Equipment. FL (Front Left) FR (Front Right) RL (Rear Left) RR (Rear Right) To AUDIO OUT To AUDIO INTo AUDIO IN Amplifier 8 Basic operation Turning the unit on Press PWR (POWER on the remote control) or any other button. Note When you insert the CD in the CD slot, the unit turns on. Turning the unit off Press PWR (or press and hold POWER on the remote control). Selecting a source Press SRC S SSrepeatedly to select a source. The indicator lights up in the following order. TUNER > CD > AUX > TUNER... Note You cannot select a source if a CD is not inserted. Adjusting the volume Rotate PWR (Press VOLUME on the remote control) to adjust the sound level. Note When you turn the unit off, the current volume level is automatically memorized. Whenever you turn the unit back on, it will operate at the memorized volume level. Mute 1 Press MUTE (POWER on the remote control) to cut the sound. 2 To cancel it, press again. Changing the general settings 1 Press and hold SEL [S](SEL on remote control) so that one of menu items appears. 2 Press SEL [S](SEL on remote control) to scroll between menus. DEMO OFF t BEEP 2ND 3 Rotate PWR clockwise or unclockwise to select one of the settings specified belows. (Press VOLUME on the remote control.) 4 Press and hold SEL [S](SEL on remote control) to finish the setting. • DEMO OFF/ ON You can change the initial indication on the display to information name (function name, EQ name, etc...) while listen to a source. DEMO ON Displays information name while listen to source. DEMO OFF Cancels the function. 9 • BEEP 2ND / ALL Sets the beep sound every time a button is pressed. BEEP 2ND The beep is generated when a key is long pressed. (1 sec) BEEP ALL The beep is generated when any key is pressed. Using the EQ (Equalizer) Press EQ repeatedly. The indicator lights up in the following order. POP t CLASSIC t ROCK t JAZZ t VOCAL t SALSA t SAMBA t USER1 t USER2 t OFF • POP : Optimized for R&B, Soul and Country music. • CLASSIC : Optimized for orchestral music. • ROCK : Optimized for Hard Rock and Heavy Metal music. • JAZZ : Sweet sound with soft feeling. • VOCAL : Powerful realism with strong sound quality. • SALSA : Reproduces salsa music acoustics. • SAMBA : Reproduces samba music acoustics. • USER1 : Use the menu to set the sound level you want. • USER2 : Use the menu to set the sound level you want. You can adjust each sound level to your preference. Once you select a USER mode and then make an adjustment, it automatically stored for the currently selected USER mode. Adjusting the sound level 1 Press SEL [S](SEL on the remote control) repeatedly to select the mode you want to adjust from volume, bass, middle, treble, balance and fader. The indicator lights up in the following order. VOL t BAS t MID t TRB t BAL t FAD 2 Rotate the PWR (Press VOLUME on the remote control) to adjust the sound quality. Indication Turn right Turn left VOL Increase the volume level. Decrease the volume level. BAS Increase the bass level. Decrease the bass level. MID Increase the middle level. Decrease the middle level. TRB Increase the treble level. Decrease the treble level. BAL Decrease the level of the Decrease the level of the right left speaker(s). speaker(s). FAD Decrease the le...