Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
3. Slide the unit and frame into the dash opening. 4. Mount the dash panel or adapter plate. 5. Mount the trim ring onto the unit. 6. Install the faceplate by sliding the right edge into position and then pushing the left edge closed. 7 A A 5 4 3 2 6 Connections Connecting to the Car Connections Connecting to the Car Before connecting, make sure that the ignition and remove the battery terminal to avoid short circuits. PREPARATION IGNITION SWITCH DIMMER SWITCH POWER ANTENNA POWER AMPLIFIER (optional) 7 REMOTE ON (BLUE/WHITE STRIPE) CONTROL RELAY 1 GND (BLACK) 6 PWR ANT (BLUE) 4 TO IGNITION (RED) 3 DIMMER (PINK) 2 PHONE (ORANGE) BATTERY A 5 TO BATTERY. (YELLOW) 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 WHITE (FL +) WHITE/ BLACK STRIPE (FL -) GRAY (FR +) GRAY/ BLACK STRIPE (FR -) GREEN (RL +) GREEN/ BLACK STRIPE (RL -) VIOLET (RR +) VIOLET/ BLACK STRIPE (RR -) 8 Connections Connecting to the Car From antenna To the wiring of vehicle Colors of leads 1 BLACK : This lead is for the Ground connection. 2 ORANGE : This lead is for the phone line connection. 3 PINK : This lead is for the Dimmer line connection. 4 RED : This lead is for connection to the power supply terminal when the ignition switch is set to ACC. 5 YELLOW : This lead is for connection to the Battery (back-up) terminal from which power is Speaker Connections L FRONT REAR R L R C 1 2 3 4 5 6 7 8 PREPARATION Connections Connecting to the Car From antenna To the wiring of vehicle Colors of leads 1 BLACK : This lead is for the Ground connection. 2 ORANGE : This lead is for the phone line connection. 3 PINK : This lead is for the Dimmer line connection. 4 RED : This lead is for connection to the power supply terminal when the ignition switch is set to ACC. 5 YELLOW : This lead is for connection to the Battery (back-up) terminal from which power is Speaker Connections L FRONT REAR R L R C 1 2 3 4 5 6 7 8 PREPARATION always supplied. 6 BLUE : This lead is for the power antenna connection. 7 BLUE/WHITE STRIPE : This lead is for the remote amplifier on connection. 9 Basic Operation Turning the unit on Adjusting the volume Basic Operation Turning the unit on Adjusting the volume Press PWR or any other button on the front panel Turning the unit off Press PWR on the front panel to turn the unit off. Selecting a source You can select a source you want to listen to. Press FUNC to select a source. Press FUNC repeatedly to switch between the following sources: Tuner > CD > Tuner.. . NOTE • When you turn the unit off, the current volume level is automatically memorized. Whenever you turn the unit back on, it will operate at the memorized volume level. Use VOLUME to adjust the sound level. Press VOLUME (VOL.+/-) button on the front panel to increase or decrease the volume. Setting the clock 1. Press DISP and press DISP for more than 1 second. (Clock indicator will be displayed for 5 seconds. Adust the clock within 5 seconds.) 2. Press on the front panel to adjust the hour. 3. Press on the front panel to adjust the minute. 4. Press DISP. Checking the clock You can see the clock pressing DISP. OPERATION 10 Basic Operation SOUND Adjustment Basic Operation SOUND Adjustment Using the EQ (Equalizer) SELECTION (SEL) Button The equalizer lets you adjust the equalization 1. Press the SELECTION (SEL.) repeatedly to select the mode acoustic characteristics of the car’s interior as desired. you want to adjust from volume, bass, treble, balance and There are 3 stored equalizer curves which you can fader. The mode indicator lights up in the following order. any time. VOL BAS TRB BAL FAD Here is a list of the equalizer curves: • EQ POP : Reproduces pop music acoustics. 2. Press CONTROL UP (VOL+) or DOWN (VOL-) to adjust the • EQ CLASSIC : Reproduces orchestral music acoustics. sound quality. • EQ ROCK : Reproduces rock music acoustics. OPERATION 1. Press EQ/XDSS on the front panel to select the equalizer. 2. Press EQ/XDSS repeatedly to choose between the following Equalizer settings. POP > CLASSIC > ROCK > FLAT (NO display) > POP.... MUTE 1. Press MUTE to cut the sound. 2. To cancel it press MUTE again. Turn right Turn left VOL Increase the volume level. Decrease the volume level. BAS Increase the bass level. Decrease the bass level. TRB Increase the Treble level. Decrease the Treble level. BAL Decrease the level of the left speaker(s). Decrease the level of the right speaker(s). FAD Decrease the level of the front speaker(s). Decrease the level of the rear speaker(s). NOTE The unit cannot adjust the bass and treble in the EQ/XDSS on mode. XDSS (Extreme Dynamic Sound System) Press and hold the EQ/XDSS button to reinforce treble, bass and surround effect. 11 Radio Operation Listening to the radio stations Radio Operation Listening to the radio stations 1. Press the PWR button to turn the unit on. - When you select a source the unit is turned 2. Press the FUNC button to select the tuner. 3. Press the BAND button to select a band. - Press the BAND button until the desired band is displayed, FM1...