Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Battery leakage may damage the unit. • Do not disassemble or short the battery. Do not throw a battery into a fire. • Keep batteries away from children to avoid the risk of accidents. • Be careful to the disposal rules when you dispose of batteries. CQ-SRX7000U 11 General [VOLA] [VOLVI (Volume) [DISP] (Display) [DIM] (Dimmer) Note : When you use this unit for the first time, a demonstration message appears on the display. To cancel this display, press [DISP]. [SOURCE] (Power/Source) [MUTE] (Mute/Attenuator) Turn the key in the ignition until the accessory indicator lights. Power ON : Press [SOURCE], Note : When the power is switched on by pressing and holding [SOURCE] for more than 2 seconds, a demonstration message appears on the display. To cancel this display, press [DISP]. Volume [VOLA]: up [VOLV] : Down Setting Range: 0 to 40 Note: The sound level for each source is stored in memory. (For radio, one volume setting for AM, one volume setting for all FMs) OFF : Press [SOURCE] again for more than 1 second. After turning off the ignition key, A security message is displayed, and the warning alarm that reminds you to take the panel and the SD Memory Card is activated. (When S-LED is set to ON ^ page 36) [SOURCE] (Power/Source) [VOLA] [VOLV] (Volume) [DISP] (Display) Source Press [SOURCE] to change the source. ► Radio ~r CD Player (When a CD tern the player) SD Player (When a SD Memory Card is in the player) [MUTE] (Mute/Attenuator) MUTE/ATT (Attenuator) MUTE/ATT ON : Press [MUTE], MUTE/ATT OFF : Press again. Decreasing volume range depends on setting. (MUTE/ATT setting ^ page 36) CD Changer (When a CD changer is connected and magazine is in the changer) AUX In (When AUX-IN setting is set to ON) page 36) : No sound : Decrease the volume to 1/10 of previous level. CQ-SRX7000U N Dimmer Press [DIM] on the main unit to change the dimmer level. DIMMER 3 —► DIMMER 2 —► DIMMER 1 (Brighter) t • (Medium) (Darker) Default: DIMMER 2 (With side marker lights ON) DIMMER 3 (With side marker lights OFF) Notes: • Set the display brightness for each of the cases in which the side marker lights are on and the side marker lights are off. • Be sure to connect the illumination lead. page 46) Display Change When Power is ON Press [DISP]. Mode Display *1 Mode & Spectrum Analyzer Display Spectrum Analyzer Display *2 Î Display OFF *3 'm № ^ ' BaaMw I Mode & Clock Display Notes : • Set the Spectrum Analyzer pattern in a separate procedure. (■► page 34) • “'ADJUST” is displayed before adjusting the clock. (Adjustment ^ page 34) *1 The title information can be displayed in the CD/SD mode. (^ page 17 and 21) *2 If you press a button, the Mode & Spectrum Analyzer Display appears for 5 seconds. *3 If you press a button, the light is turned on, the Mode Display appears, and the light is turned off approximately 5 seconds later. Press and hold [DISP] for more than 2 seconds. Indicators which are not displayed on Mode Display are displayed. (Sound, sound space and SD data information etc.) Press [DISP] again to cancel. AUDIO Indicator _[AUOI Q| < N DI TO R f ■'sïîcïï «lofTl ■ iuijAJJ m'toïTîïl tmwj __ » m y ¿j___ ■ tliJfiüiiQTHTTFfl Press [DISP], Clock Display When Power is OFF Display OFF (Back light is on) (Back light is off) CQ-SRX7000U 13 COX cox Radio [BAND] (Auto preset memory) [D- M] (Direct memory)- Radio Mode Display Band Stereo Indicator Frequency [SOURCE] (Source) [TUNE<] [TUNE>] (Tune) [PESETA] [P-SETV] (Preset station) Note: The stereo indicator lights during reception of an FM stereo broadcast. O Radio Mode Press [SOURCE] to change to radio mode. [SOURCE] (Source) Press [BAND]. [1] to [6] (Preset station) [BAND] (Auto preset memory) [<] [>] (Tune) FM1 4— 1 FM2 FM3 I AM [A] [V] (Preset station) [TUNE>] / [>]: Up [TUNE<] / [<] : Down Press and hold [TUNE>] or [TUNE<] / [>] or [<] for more than 0.5 seconds, then release. Seeking will start. Direct Memory Your favorite radio station can be memorized in the D M button and you can call back radio stations just by pressing the button whatever the current sound source is, even if the power is off. Default: FM 87.9 MHz Memorize 0 Select a band and frequency (step 0,0 and €> on the above.) Recalling the Direct Memory Press [D • M] on the main unit. Press [D. M] on the main unit again to cancel and return to the previous source. (D Press and hold [D ■ M] on the main unit for more than 2 seconds. Frequency blinks once and is saved in the memory. Notes: • New station is overwritten on existing saved station after following memorization procedure. • Only the following operations are practicable while the Direct Memory radio station is being played: turning the power on or off, switching the source, adjusting the volume, turning on or off Mute (Attenuator), adjusting dimmer, switching the display, and loading a disc or a card. Cancel the Direct M...