Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
To cancel this display, press “DISP” button once. When a CD is inserted with ail power connected, the unit power will automatically turn on and CD loading begins and plays. FM 01.3 Volume Turn the dial (©) to the clockwise or counterclockwise to increase or decrease volume. m»/ ni V LJ!_ n U -Volume Level Oto 40 S*HDB (Super High Definition Bass) Especially for rock music, the bass-sound will be more powerful. • Press and hold ATT(S«HDB) for more than 2 seconds to be able to listen to high-definition bass. • Press and hold ATT(S*HDB) for more than 2 seconds again to return to the normal tone. usi-M Note: This unit is equipped with an anti-volume-blast circuit which serves as an automatic volume level adjuster so that you will not be deafened sudden loud volume. This system operates as follows. When PWR is switched on, the volume level is low. After that, the volume level gradually returns to its previous level prior to switching off the unit. CQ-DPG655/605EUC 7 Power and Sound Controls continued Attenuator • Press ATT to decrease volume to about 1/10 of the previous level. Mil • Press ATT again to cancel. Changing Audio Modes Press SEL to switch the audio mode in the following order. Normal Mode VOLUME t BASS • TREBLE SUB-W * FADER ■ • BALANCE « Bass and Treble Press SEL to select the BASS (TREBLE) mode. Turn the dial (©) to the clockwise or counterclockwise to increase or decrease the bass (treble) response. FM lEdl -12 to +12 FM TRE-- ISdl + ■12 to+12 Balance Press SEL to select the BALANCE mode. Turn the dial (©) to the clockwise or counterclockwise to shift the sound volume to the right or left speakers. FM JRL L 15 t 1 to 15 FM wl rrj: FM JRL R 15 Balance Center t- 1 to 15 Fader Press SEL to select the FADER mode. Turn the dial (©) to the clockwise or counterclockwise to shift the sound volume to the front or rear speakers. 8 CQ-DPG655/605EUC If II ^ Sub-woofer Volume © Press SEL to select the Sub-woofer Volume mode. ©When Sub-Woofer Is activated, Turn the dial (0) to the clockwise or counterclockwise to increase or decrease the Sub-Woofer Volume level. fm 5U1 3 Sub-Woofer Volume Level MUTE (0) to 8 isa FM 5US mi t t rz mu i L i CQ-DPG655/605EUC 9 — cox To use this unit other than in North or South America, please change the area mode to the “Tuner 2 area” as follows. [North or South America] Tuner 1 area (Factory setting) FM1 to FM3 : 87.9 to 107.9 MHz (200 kHz steps) AM : 530 to 1,710 kHz (10 kHz steps) [Other countries] Tuner 2 area FM1 to FM3 : 87.5 to 108.00 MHz (50 kHz steps) AM : 531 to 1,602 kHz (9 kHz steps) To change Tuner area mode (After the wiring and installation are completely done.) 1. Change from Tuner 1 area mode to Tuner 2 area mode 0 Press PWR to switch the power on. (!) Press PWR again to switch the power off. (3) Keep pressing BAND down and press PWR. Then “TUNER 2” area mode is displayed for 10 seconds. Tt thtfZP p i lj > v L fv 2. Change from Tuner 2 area mode to Tuner 1 area mode. Perform the above steps ©, (D and (D again. Tuner 1 area mode displays within 10 seconds. Note • The factory setting mode is ‘Tuner 1” (for North and South America). • The factory setting mode will be returned once the unit power is cut off (such as dead battery, or unit removes from the car). •When you switch the tuner area mode, settings (clock, preset memories, volume setting, etc.) will return to their factory setting. 10 CQ-DPG655/605EUC To change Tuner Mode Press MODE to switch the operation mode in the following order. Tuner » CD player • CD Changer Control * (When a disc is inserted) * (When a CD changer is connected) FM " 0 ~J.g Selecting a Band Press BAND to select the bands in the following order, si indicator lights if the station is broadcasting in stereo. FM1—► FM2 —*FM3 —►AM t_i Manual Tuning Press “TUNE>" or “