Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Press “VOL/V’ or “VOL V” to increase or decrease the bass/treble response. 3HS ¡PE -3 — 12 to 12 — 12 to 12 • Press “VOLA” or “VOLN/” for more than a half second to change numeric levels on the display rapidly. Balance • Press SEL to select the BALANCE mode. Press "VOL A” or “VOL V” to shift the sound volume to the right or left speakers. SHi №. or L 1 to 15 Balance Center • Press “VOL A ” or “VOL V ” for more than a half second to change numeric levels on the display rapidly. Fader • Press SEL to select the FADER mode. Press “VOLA" or “VOL V" to shift the sound volume to the front or rear speakers. • Press “VOLA" or “VOL V” for more than a half second to change numeric levels on the display rapidly. Note; When a control mode (BAS/TRE/BAL/FAd) is selected but no operation is made within 5 seconds (2 seconds at volume mode), the display will return to the normal operation (Radio, CD) mode. In such a case, press SEL again to select the control mode. CQ-DP720EUC/DP71OEUC Selecting Auxiliary Source (Only for DP720EUC) © Press AUX to select AUX Input mode. in AUX Jack CD Connect the auxiliary equipment (an optional DCC player deck or any other appropriate equipment) to the AUX Jack. To resume the previous mode, press AUX or MODE. 1 -:- Caution: -// In order to insert the plug into the “AUX” Jack properly, make sure ^ to use the correct size of the stereo plug shown on the left. T B i c—1 A-MIN1/2" LONC B-MAX2/5“ DIA. C-MIN 1/8" DIA —A— B (12mm) (10mm) (3.5mm) 1 Radio Basics To change Tuner Mode Tuner mode is selected if the MODE button is pressed while in CD Player or AUX(Only for CQ-DP720EUC) mode. IUC. I F" I Selecting a Band Press BAND to select the bands in the following order. FM1 AM “ST’ indicator lights if the station is broadcasting in stereo. Manual Tuning Press “ATUNE” or “VTUNE” to move to a higher or lower frequency. Seek Tuning Press and hold “ATUNE” or “VTUNE” for more than a half second, then release. The radio automatically stops on the next station. 10 CQ-DP720EUC/DP710EUC Preset Station Setting Up to 20 stations can be preset in the station memory as follows; FM1 FM2 FM3 AM 5 stations 5 stations 5 stations 5 stations Manual Station Preset © Press BAND to select a desired band. (D Use manual or seek tuning to find a station that you want to program into memory. (D Press and hold one of the station selector buttons 1 through 5 until the display blinks. Repeat the process to set other stations for the FM1 to AM bands. IU ~l FNd-3—BUTTON NUMBER Note: You can change the memory setting by repeating the above procedure. Tuning in a Preset Station Press any of the buttons 1 through 5 to tune in the station preset by the above steps 0 to (3). Auto Station Preset Select a band and press and hold BAND(AUTO PRESET) for more than 2 seconds. • The five strongest available stations will be automatically set in memory on preset buttons 1 through 5. • Once set, the preset stations are sequentially scanned for 5 seconds. Press the appropriate preset button for the station you want to hear. CAUTION: For safety reasons, do not attempt to program while driving. CCQ-DP720EUC/DP71OEUC 1(0 Compact Disc Player Basics Mode Selection While the CD is playing, press MODE to switch to the tuner mode and vice versa. CD Player ► Tuner To start the CD Player Insert the disc and playback starts automatically. iOHd' “LOAd" will be displayed until the disc is loaded. Play starts from first track. LORd nn I UU I -TRACK Note: While the disc is inserted, “ o ” indicator will light. Ejecting a Disc Press “A” to stop CD play, and the disc will quietly eject from the CD slot. (During disc ejection, “EJ” will be displayed.) Selecting a Track Press “TRACKA” once to go to the next track. Press repeatedly to step forward through all the tracks. Press “V TRACK” once to play from the beginning of the track you are listening to. Press twice to play the previous track. Press repeatedly to step backward through all the tracks. 12 CQ-DP720EUC/DP710HUC Searching a Track Press and hold “TRACK A ” or “ V TRACK” for more than a half second to activate fast forward or reverse through a track. Press “TRACK A” or “V TRACK” again to end the search mode. Repeating a Track Press R/R^ to repeat the current selection. “REPEAT” indicator will light. The current selection will continue to repeat until you press R/R^ again. Random Selection Press and hold R/R^ for more than 2 seconds. “RANDOM" indicator will light. A random selection of music is played from all available tracks. RANDOM To turn off the random play feature, press and hold R/R^ again for more than 2 seconds. Scanning a Disc Press SCAN. The display will blink and the first 10 seconds of each track on the disc play in order. —7^ | X- To stop scanning and continue with the current track, press SCAN again. CQ-DP720EUC/DP710EUC 13 c/>r Clock Basics (The clock system is 12-hours.) Initial Time Settin...