Оценок - 6, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
. Press the OK button : to display the tuner menu. . Press the or button 7 repeatedly until “R-TEXT” appears in the display. . Press the or button 7 to switch radio text on/off. “R-TEXT OFF” means that no radio texts will be displayed and “R-TEXT ON” means they will be displayed. . Press the MENU button 9. Traffic information Your device is equipped with an RDSEON receiver. EON stands for Enhanced Other Network. Whenever a traffic announcement (TA) is broadcast, the system switches automatically from a station that does not provide traffic reports to the appropriate traffic information station within the broadcasting network that does. Once the traffic report has been played, the system will switch back to the programme that you were listening to before. Switching traffic information priority on/off . Press the TRAF button =. Traffic announcement priority is active when the traffic-jam symbol lights up in the display. Note: You will hear a warning beep: . if you leave the reception area of a traffic information station that you are currently listening to. . if, while listening to a CD or CD in the changer, you leave the reception area of a traffic information station that the system is tuned into and the subsequent automatic search cannot find a new traffic information station. . if you retune the radio from a traffic information station to a station that does not broadcast traffic information. ENGLISH 61 TRAFFIC INFORMATION CD MODE If you hear the warning beep, you can either switch off traffic information priority or tune into a station that broadcasts traffic information. Setting the volume for traffic announcements . Press the MENU button 9. . Press the or button 7 repeatedly until “VOLUME MENU” appears in the display. . Press the OK button : to display the volume menu. . Press the or button 7 repeatedly until “TRAFFIC” appears in the display. . Adjust the volume using the buttons 7. When you have finished making your changes, . press the MENU button 9. Note: . Using the volume control 5, you can also adjust the volume during a traffic announcement for the duration of that announcement. Note: . You can adjust the sound settings and volume distribution settings for traffic announcements. For further information, please read the “Sound” chapter. CD mode You can use this device to play standard audio CDs, CD-Rs and CD-RWs with a diameter of 12 cm. To avoid problems when playing CDs, you should not burn CDs at speeds greater than 16speed. Besides being able to play audio CDs on this device, you can also play CDs containing MP3 music files. For further information, please read the chapter entitled “MP3 mode”. Risk of severe damage to the CD drive! CD singles with a diameter of 8 cm and non-circular contoured CDs (shape CDs) must not be used. We accept no responsibility for any damage to the CD drive that may occur as a result of the use of unsuitable CDs. Switching to CD mode . If there is no CD inserted in the drive, . press the button 2. The flip-release panel opens. . Gently insert the CD with its printed side uppermost into the drive until you feel some resistance. The drive draws in the CD automatical ly. You must not hinder or assist the drive as it draws in the CD. . Gently close the control panel whilst exerting a little pressure until you feel it click into place. The CD starts playing. CD MODE Note: . If the device was switched off before you inserted the CD, you will first have to switch on the device by pressing button 1 in order to start playing the CD. . If a CD is already inserted in the drive, . press the SRC button @ repeatedly until “CD” appears in the display. Playback begins from the point at which it was last interrupted. Selecting tracks . Press one of the arrow buttons 7 to select the next or previous track. If you press the or button 7 once, the player will play the current track again from the beginning. Fast track selection To quickly select tracks backwards or forwards, . press and hold down one of the / buttons 7 until fast-reverse / fast-forward track selection begins. Fast searching (audible) To fast search backwards or forwards, . press and hold down one of the buttons 7 until fast searching backwards / forwards begins. Random track play (MIX) . Press the 4 MIX button ;. “MIX CD ON” appears briefly in the display and the MIX symbol lights up. The next randomly selected track will then be played. Cancelling MIX . Press the 4 MIX button ; again. “MIX CD OFF” appears briefly in the display and the MIX symbol disappears. Scanning tracks (SCAN) You can scan (briefly play) all the tracks on the CD. . Press and hold down the OK button : for longer than two seconds. The next track will then be scanned. Note: . You can set the scanning time. For further information, please read the section entitled “Setting the scanning time” in the “Radio mode” chapter. Cancelling SCAN and continuing listening to a track . To stop scanning, press the OK button :. The currently scanned track will then c...
Эта инструкция также подходит к моделям:Автомагнитолы - ACAPULCO MP54 7 644 252 310 (401.42 kb)