Оценок - 5, средний балл: 4.6 ( )

Производитель: Alpine Размер: 924.86 kb Название файла: Язык инструкции:

Фото и характеристики  Alpine  CDA-9813R

CANCEL : Halts the download DOWNLOAD : Starts the download NEXT FILE : Searches the next file 5 When data download is finished successfully, the confirmation screen is displayed for 5 seconds and the download mode closes. Successfully downloaded items are indicated as checked boxes on the confirmation screen. PARAMETRIC EQ data The data is memorized in Preset 6 of Parametric EQ mode. The memorized data settings in Preset 6 (Parametric EQ mode) are automatically applied. X-OVER (Crossover) data The data is memorized in Preset 6 of X-OVER mode. The memorized data settings in Preset 6 (X-OVER mode) are automatically applied. You cannot download the data if the setting of the 2WAY/3WAY switch is not suitable for the data. TIME CORRECTION data The data is memorized in Preset 6 of the Time correction mode. The memorized data settings in Preset 6 (Time Correction mode) are automatically applied. • When you download the data again, the data is overwritten in Preset 6. 26-EN SETUP SETUP You can flexibly customize the unit to suit your own preferences and usage. Choose the SETUP menu from Sound Customizing, Visual Customizing, etc., to select your desired setting. SOURCE/ POWER BAND/TEL. Rotary encoder gf F/SETUP The common operation for SETUP is step 1 to 4 as follows. See down below for further information about each SETUP menu. 1 Press and hold F/SETUP for at least 3 seconds. SETUP mode is activated. 2 Press g or f to select the desired SETUP menu. (e.g. Select BEEP) Here is the explanation for CDA-9815RB display example. FM-LEVEL > REG*5 > PI SEEK*5 > NORMAL/HI-FI/STABLE > AMBER*4 > DIMMER*7 > SUB-W > SUB-W STEREO/ SUB-W MONO*2 > CD-DA / CD-DA/MP3*6 > BEEP > SCROLL > SCROLL TYPE*1 > MUTE > INTERRUPT > AUX > (AUX name)*3 > PWR-IC > FONT*1 > CONTRAST*1 > DEMO > FM-LEVEL *1 CDA-9815RB only. *2 CDA-9815RB/CDA-9813R only. *3 Displayed only when AUX is ON. *4 CDA-9813R only *5 “RDS” (page 9 to 12) *6 Displayed for CDA-9811R if an MP3 compatible changer is connected. *7 CDA-9815RB/CDA-9813R/CDA-9812RX only. 3 Press BAND/TEL. to change the setting. (e.g. Select BEEP ON or BEEP OFF.) • The Display Contrast described in the section “Adjusting Display Contrast (CDA-9815RB only)” can also be changed by turning the Rotary encoder. 4 Press F/SETUP again. The display returns to normal mode. Sound Customizing Adjusting Source Signal Levels FM-LEVEL HIGH (Initial setting) / FM-LEVEL LOW If the difference in volume level between the CD player and FM radio is too great, adjust the FM signal level. Switching the Tuner Mode NORMAL (Initial setting) / HI-FI / STABLE This unit incorporates the MAX TUNE SQ for the highest quality tuner audio. Moreover, you can choose between three settings to suit your own personal sound preferences and usage. NORMAL: Standard setting HI-FI: Sound quality priority setting STABLE: Noiseless priority setting • If you find the sound is very noisy while listening to the tuner in Hi- Fi mode, we recommend you change to Normal mode. Subwoofer On and Off SUB-W ON (Initial setting) / SUB-W OFF When the subwoofer is on, perform the steps below to adjust the subwoofer output phase and level. 1 Press the Rotary encoder repeatedly to select the SUB-W mode. SUB-W > BALANCE > FADER > DEFEAT > VOLUME > SUB-W 2 Press g or f. The subwoofer output phase is toggled SUB-W NORMAL (0°) or SUB-W REVERS (180°). To adjust the level, turn the Rotary encoder. Setting the Subwoofer Output (CDA-9815RB/CDA-9813R only) STEREO (Initial setting) / MONO You can set the subwoofer output to stereo or monoaural. Make sure to set the correct output for your subwoofer type. STEREO: Subwoofer stereo (L/R) output MONO: Subwoofer monaural output Sound (Beep) Guide Function BEEP ON (Initial setting) / BEEPOFF This function will give audible feedback with varying tones depending upon the button pressed. Visual Customizing Changing Lighting Colour (CDA-9813R only) AMBER ON/AMBER OFF (Initial setting) You can change the lighting colour on the front panel. AMBER ON: Amber colour AMBER OFF: Green colour Dimmer Control (CDA-9815RB/CDA-9813R/CDA-9812RX only) DIMMER AUTO (Initial setting) / DIMMER MANUAL Set the DIMMER control to AUTO to decrease the illumination brightness of the unit with the head lights of the vehicle ON.This mode is useful if you feel the unit's backlighting is too bright at night. Scroll Setting SCROLL AUTO / SCROLL MANUAL (Initial setting) This CD player can scroll the disc and track names recorded on CDTEXT discs, as well as the text information of MP3/WMA files, folder names, and tags. (This function can be used for CDA-9811R if a changer compatible with CD-Text is connected.) SCROLL AUTO : The CD text information, the text information of folder and file names, and the tags are scrolled automatically. SCROLL MANUAL : The display is scrolled only when a disc is loaded or when a track is changed, etc. • The unit scrolls CD text names, folder names, file names or tag display. The disc titles input manually (page 25) cannot be scrol...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: