Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
..1 Kit Preparation - Display Unit Assembly ................................... .2 Kit Assembly -Double DIN Head Unit Provision..............................3 -ISO Stacked Head Unit Provision............................ .4 *Note: Refer also to the instructions included with the aftermarket radio. Knowledge is power Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto or call 800-354-6782 for more information and take steps toward a better tomorrow. 95-7866B DASH DISASSEMBLY ACURA MDX g001-gQ06 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove trim panel around radio/display including a/c vents. (Figure A) 3 Remove (6) mounting screws and remove the audio/display unit from the dash. (Figure B) 4 Remove (8) screws from the audio unit and (4) screws from the display unit and remove the brackets from the audio/display assembly. Continue to kit preparation. A B 1 95-7866B KIT PREPARATION DISPLAY UNIT ASSEMBLY *Note: Refer also to the instructions included with the aftermarket radio. Using the mounting screws from the display unit, attach the brackets supplied with the kit by aligning the guide pins on the display with the holes on the brackets. (Figure A) Align guide pins on bottom of display unit with holes on top of housing and attach the unit to the housing using the (2) screws previously removed. (Figure B) Continue to kit assembly. A 1 2 B 2 95-78GGB KIT ASSEMBLY DOUBLE DIN HEAD UNIT PROVISION/ ISO STACKED HEAD UNIT PROVISION *Note: Refer also to the instructions included with the aftermarket radio. 1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 2 Slide the Double DIN head unit or stacked ISO head units into the bracket/radio housing assembly and secure the Double DIN head unit or stacked ISO head units to the assembly using the screws supplied with the radio. (Figure A) 3 Reassemble dash in reverse order of disassembly. A 3 95-7SBBB NOTES 4 95-78GGB NOTES 5 95-7SBBB INSTRUCTIONS g 1-800-221-0932 Q REV. 08/24/09 © COPYRIGHT 2003-2009 METRA ELECTRONICS CORPORATION INST99-7866B...