Оценок - 5, средний балл: 4.6
(
)
)
|
Фрагмент инструкции
Protect from High Temperatures Exposure to direct sunlight for an extended period of time can produce very high temperatures inside your vessel. Give the interior a chance to cool down before starting playback. Do not mount radio within close proximity of engine compartment. Use the Proper Power Supply This product is designed to operate with a 12 volt DC negative ground battery system. Protect the Disc Mechanism Avoid inserting any foreign objects into the disc slot. Misuse may cause malfunction or permanent damage due to the precise mechanism of this unit. CAUTION: THIS MOBILE CD PLAYER IS A CLASS I LASER PRODUCT. THIS UNIT USES A VISIBLE/ INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION IF EXPOSED DIRECTLY. BE SURE TO OPERATE THE MOBILE CD PLAYER AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF. PLEASE REFER SERVICING TO A QUALIFIED TECHNICIAN. WARNING: • TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT DIRECTLY TO WATER. • TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES. DISC NOTES Depending on the recording status, conditions of the disc, and the equipment used for recording, some CD-Rs/CD-RWs may not play on this unit. For more reliable playback, please adhere to the following recommendations: • Use CD-RWs with speed 1x to 4x and write with speed 1x to 2x. • Use CD-Rs with speed 1x to 8x and write with speed 1x to 2x. • Do not play a CD-RW which has been written more than 5 times. Compatible Disc Types NOTE: CD-R and CD-RW discs will not play unless the recording session is closed and the CD is finalized. Disc Maintenance • A dirty or defective disc may cause sound dropouts while playing. Before playing, wipe the disc using a clean cloth, working from the center hole towards the outside edge. Never use benzene, thinners, cleaning fluids, anti-static liquids or any other solvent. • Be sure to use only round CDs for this unit and do not use any special shape CDs. Use of special shape CDs may cause the unit to malfunction. • Do not stick paper or tape on the disc. Do not use CDs with labels or stickers attached or that have sticky residue from removed stickers. • Do not expose discs to direct sunlight or heat sources. NOTE: A disc may become scratched (although not enough to make it unusable) depending on how you handle it and other conditions in the usage environment. These scratches are not an indication of a problem with the player. Table 1: General Disc Information Disc Type Logo Diameter/ Playable Sides Playback Time Audio CD 12 cm single side 74 minutes MSR3007 5 BASIC OPERATION Power On/Off Press any button on the front panel to turn the unit on. Press the POWER button (1) to turn the unit off. • If a disc is being inserted when the radio power is off and the ACC (accessory switch) is on, the unit will automatically power up and playback will start. • If a CD is present, playback resumes at the last position in memory before the ignition was turned off or the POWER button was pressed. • If no CD is present, the unit will resume at the last mode selected (Tuner, Aux, etc.). The POWER button is illuminated whenever the IGN lead (red wire) is powered, regardless of whether the unit is on or off. Volume Control To increase the volume, press the VOLUME + button (2a). To decrease the volume, press the VOLUME - button (2b). Mute Press the MUTE button (17) on the control panel to mute the audio output. Press MUTE again to restore the audio output to the previous level. Mode Press the MODE button (4) on the control panel to select a different mode of operation, as indicated on the display panel. Available modes include Tuner, SIRIUS, CD, iPod and AUX In (optional Auxiliary Input). NOTE: CD, CDC, IPOD, or SIRIUS mode will be skipped if the module is not installed. Reset The reset button should be activated for the following reasons: • initial installation of the unit when all wiring is completed • function buttons do not operate • error symbol on the display Use a ball point pin or thin metal object to press the RESET button (18). This may be necessary should the unit display an error code. You can recover factory default settings using the RESUME function located on the system menu. With “YES” flashing, press the MODE button (4) to activate. Audio Menu Press the AUDIO button (3) on the control panel to access the audio menu. You can navigate through the audio menu items by pressing the AUDIO button repeatedly. Once the desired menu item appears on the display, adjust that option by pressing the VOLUME +/- buttons (2) within 5 seconds. The unit will automatically exit the audio menu after five seconds of inactivity. The following menu items can be adjusted. Bass Level Use the VOLUME buttons to adjust the Bass level range from “-6” to “+6”. Treble Level Use the VOLUME but...