Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
R14 (C) When to replace the batteries The OPE/BATT indicator becomes dim, the tape speed slows down, volume decreases, or sound is distorted during operation. Notes on batteries • Do not mix different types of batteries or old batteries with new ones. • When the unit is not to be used for a long period, remove the batteries to prevent needless battery wear. • Never recharge the batteries, apply heat to them or take them apart. • Remove dead batteries. If liquid leaks from the batteries, wipe thoroughly to remove. En ENGLISH 3 RADIO/BAND, POWER 6STANDBY \ A SKIP/SEARCH TUNE + - REPEAT FM MODE /OSC SLEEP PLAY/PAUSE/ PRESET STOP/MEMORY TUNER OPERATIONA 1 Press RADIO/BAND repeatedly to select the desired band. FM AM The power is turned on and the previously tuned station is received. 2 Press r, t(TUNE -, +) to select a station. During FM stereo reception, is displayed. After listening, press POWER 6STANDBY to turn the power off. For better reception FM AM Extend the rod antenna The antenna is inside the and orient it for the best unit. Position the unit for reception. the best reception. For quick tuning (Auto Search) Keep r, tpressed until the tuner starts searching for a station. When a station is tuned to, the search stops. If the broadcast signal is weak, it does not stop. To stop the search manually, press ror t. FM MODE/OSC -If an FM stereo broadcast contains noise, press the button so that is displayed. Noise is reduced, although reception is monaural. To restore stereo reception, press the button again. -If a high-pitched sound is heard during AM recording, press the button repeatedly until the noise is reduced. Its position can be checked by “•” being on or off the display. To change the AM tuning interval The default setting of the AM tuning interval is 10 kHz/ step. If you use this unit in an area where the frequency allocation system is 9 kHz/step, change the interval as follows. 1 Press RADIO/BAND to display FM. 2 Press swhile pressing RADIO/BAND to display the AM frequency. When the AM tuning interval is changed, the preset stations are cleared. NOTE If the unit picks up noise from other electrical appliances nearby, like a TV or fluorescent lights, move the unit away. To listen with the headphones Connect headphones with a stereo mini plug to the \ jack. 4 ENGLISH Maintenance To clean the cabinet Use a soft cloth lightly moistened with mild detergent solution. Do not use strong solvents such as alcohol, benzine or thinner. To clean the heads When the tape heads are dirty; -high frequency sound is not emitted -the sound is not adequately high -the sound is off-balance -the tape cannot be erased -the tape cannot be recorded on After every 10 hours of use, clean the tape heads with a head cleaning cassette. Use separately sold dry-type or wet-type cleaning cassette. Refer to the instructions of the cleaning cassette for details. To clean the lens Use a cotton swab slightly moistened with cleaning fluid. Wipe gently from the center to the edge. Lens Lens PRESETTING STATIONS You can preset up to 15 stations in each band. 1 Select a station. 2 Press sSTOP/MEMORY once so that “M” is displayed to store the station. A station is assigned a preset number, beginning from 1 in consecutive order for each band. Preset number Frequency En 3 Repeat steps 1 and 2. The next station will not be stored if a total of 15 preset stations have already been stored for a band. To listen to preset stations Select a band then press ePLAY/PAUSE/PRESET repeatedly. To clear a preset station Select the preset number first. Within 4 seconds, keep spressed until “M” and the preset number disappear in the display. The higher numbers in the band are decreased by one. ENGLISH 5 CD, POWER 6STANDBY B SKIP/SEARCH TUNE + - REPEAT FM MODE /OSC SLEEP PLAY/PAUSE/ PRESET STOP/MEMORY CD, POWER 6STANDBY B SKIP/SEARCH TUNE + - REPEAT FM MODE /OSC SLEEP PLAY/PAUSE/ PRESET STOP/MEMORY CD OPERATIONB 1 Press CD. The power is turned on. 2 Press CD OPEN to open the disc compartment. Place a disc with the printed side up and close the disc compartment. CD OPEN Total number of tracks and total playing time are displayed. It will take about 15 seconds when loading a CD-RW disc. 3 Press ePLAY/PAUSE/PRESET to start play. The number of the track being played and elapsed playing time are displayed. sSTOP/MEMORY – Stops play. ePLAY/PAUSE/PRESET – Pauses play. To resume play, press again. r,tSKIP/SEARCH – Searches for a particular point during playback. Keep ror tpressed and then release it. – Skips to the beginning of a track. Press ror trepeatedly. REPEAT – Repeats a single track or all tracks. Select as follows. [1 : A single track is played repeatedly. Select a track with ror t. [: All tracks are played repeatedly. To start play when the power is off, press CD. The power is turned on and play of the loaded disc begins (Direct Play Function). After listening, press POWER 6STANDBY to turn the power off. NOTE • Do not use irregular shape CDs (example: heart...
Эта инструкция также подходит к моделям:Автомагнитолы - CSD-TD320 (243.03 kb)