Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Copyright a 1996, 1997 Micronics Computers, Inc. The information contained in the W6-LI PCI/ISA Dual Pentium Pro Processor system board manual has been carefully checked and is believed to be accurate. Micronics assumes no responsibility for any inaccuracies that may be contained in this document. Micronics makes no commitments to update or to keep the information in this manual at a current level when changes are made to the product. Micronics reserves the right to make improvements to this document and/or product at any time and without notice. All Rights Reserved. No part of this document may be photocopied, reproduced, translated, or reduced to any medium or machine form without prior, written consent from Micronics. Portions of the Manua. Portions of this manual were copied (with permission) from Phoenix Technologies, Ltd., Adaptec, Inc. and Micro Computer Systems, Inc. All rights reserved. Trademark. IBM is a registered trademark of International Business Machines. Microsoft and Windows are registered trademarks of Microsoft Corporation. Intel and PCI are registered trademarks of Intel Corporation. All other product names mentioned herein are used for identification purposes only and may be the trademarks of their respective companies. Table of Content. Introductio. 5 Features 6 Software Compatibility 7 Before You Begin 8 Chapter 1 - Quick Installatio. 9 Installing the W6-LI 9 Chapter 2 - Configuring the W6-L. 11 Static Electricity 11 Office Environment 11 W6-LI System Board 12 W6-LI Back Panel Connections 12 Jumper Settings 13 Chapter 3 - Installing the W6-L. 17 Introduction 17 System Memory Support 17 Installing the W6-LI 18 Tools Required 18 Equipment Required 18 System Memory 19 DIMMs Supported 19 Adding Memory 19 Memory Configurations 21 Installing the DIMMs 25 Removing DIMMs 25 Installing a CPU 26 Installing a PCI Peripheral Card 27 Installing a ISA Peripheral Card 28 W6-LI System Board Manua. . Installing a CD-ROM Drive 29 The W6-LI Sound Option 30 Connecting Sound Devices 30 Connecting the Telephony Option 31 Connecting the SCSI Option 32 Chapter 4 - The BIOS Setup Utilit. 33 Configuration 33 Initial Bootup 33 Setup 33 Running the Setup Procedure 35 Setting the Main Screen 35 Setting the Advanced Screen 40 Security Screen 43 Power Screen 46 Boot Screen 48 Exit Screen 49 Chapter 5 - Installing Device Driver. 51 About Device Drivers 51 Installing the Sound Drivers 51 Installing the SCSI Drivers 52 Appendix A - Technical Informatio. 53 Specifications 53 Environmental Specifications 54 Temperature Range 54 Relative Humidity 54 Battery Disposal 55 Support and Information Services 56 Technical Support 56 . W6-LI System Board Manua. Appendix B - Post Message. 59 Appendix C - Beep and POST Code. 61 Appendix D - Hard Disk Drive Type. 65 Appendix E - Updating the System BIO. 67 Appendix F - Warranties and Notice. 69 Limited Warranty 69 FCC Statement 71 Declaration of Conformity 72 Glossar. 73 Inde. 77 W6-LI System Board Manua. . List of Figure. Figure 1.1: Power-Up Screen 10 Figure 2.1: W6-LI System Board 12 Figure 2.2: W6-LI Back Panel Connections 12 Figure 3.1: Installing a 168-Pin DIMM 25 Figure 3.2: Installing a PCI Card 27 Figure 3.3: Installing an ISA Peripheral Card 28 Figure 3.4: Connecting External Sound Devices 30 Figure 4.1: Power-Up Screen 34 Figure 4.2: CMOS Main Screen 35 Figure 4.3: IDE Device Submenu 38 Figure 4.4: Advanced Screen 40 Figure 4.5: Security Screen 43 Figure 4.6: Supervisor Password Submenu 44 Figure 4.7: Power Screen 46 Figure 4.8: Boot Screen 48 Figure 4.9: Exit Screen 49 List of Table. Table 2.1: CPU Speed Selection 13 Table 2.2: CPU Voltage Selection 13 Table 2.3: ISA Bus Clock Selection 14 Table 2.4: System Power Supply Setting 14 Table 2.5: Clear CMOS Settings 14 Table 2.6: Onboard Sound Selection 14 Table 2.7: Pipelining Mode Settings 15 Table 2.8: Onboard SCSI Selection 15 Table 2.9: Case and Peripheral Connections 15 Table 3.1: Memory Configurations 21 Table A.1: Support and Information Services 57 . W6-LI System Board Manua. Introductio. Introductio. Thank you for choosing the W6-LI system board. The W6-LI is the highest performing advanced dual processor solution for the industry's most demanding workstation and server applications. Based on the Intel 440FX PCIset, the W6-LI supports the most advanced processor architecture, the Pentium Proa, which provides the speed and performance necessary to address the most intensive computational applications. Integrated Ultra Wide SCSI (up to 40MBytes/sec transfer rate), PCI and ISA slots, up to 512K of Level 2 cache on each CPU and support of Universal Serial Bus (USB), make this board powerful and feature rich. The USB interface has a maximum bandwidth of 12Mbps and can connect as many as 127 devices to a host system. USB supports both standard devices that operate at the full 12Mbps rate and low-end devices that use only a 1.5Mbps subchannel. Designed to fit into the most modern ATX form factor, the flexible W6-LI also f...