Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
Response1 (-3 dB): 100 Hz - 16 kHz Freq. Range1 (-10 dB): 70 Hz - 20 kHz Rotatable Coverage: 90° x 50° Rec. High-Pass Frequency: 90 Hz Passive Crossover Freq.: 2400 Hz Axial Sensitivity1: 94 dB (1 W/1 m) Max. Calculated SPL1: 125 dB Passive Power Handling2: 300 W continuous, 1200 W peak Impedance: 8 ohms (nominal), 6.0 ohms (min.) LF Transducers: Dual ICT-6.5-16, 6.5” (165mm) drivers HF Transducer: ICT-1-8, 1.3” (33mm) diaphragm compression driver Connectors: Single four-pin 12 AWG Phoenix/Euro Block screw-terminals Enclosure: 9-ply hardwood plywood with textured paint Grille: 18 GA steel with cloth Environmental: IEC 60529 Suspension: (6) M8 threaded suspension points Dimensions (H x W x D): 8.21” x 20.98” x 8.14” (208.4 mm x 532.9 mm x 206.7 mm) Net Weight: 25.0 lb (11.3 kg) Shipping Weight: 31.2 lb (14.2 kg) The Electro-Voice EVU-2062/95 is a compact two-way loudspeaker system that can be used in a variety of applications where high quality sound reinforcement is required in an ultra-compact lightweight enclosure. The enclosure design utilizes asymmetric angles to maintain tight clearances to wall and ceilings while providing optimal coverage patterns making it ideal to blend into surroundings. This design was optimized for wall, stage lip and under balcony applications. The EVU-2062/95 incorporates the ICT-1-8, a high-output 1.3” diaphragm titanium compression driver coupled to a Constant Directivity ™ 90° x 50° rotatable waveguide. The ICT-6.5-16 woofer was developed using FEA optimization to provide the highest sensitivity while achieving the highest level of speech intelligibility. The crossover design uses 18-dB-per-octave slopes with equalization for very smooth response in the vocal range, linear off-axis response and a protection circuit for long term reliability. The EVU series is constructed of 9-ply hardwood plywood enclosures with six integral M8 suspension points to support a wide variety of mounting positions. The EVU system is finished in textured paint, available in either white or black. Each EVU system includes a universal U-bracket to facilitate mounting. The U-bracket provides full unobstructed rotation of the loudspeaker (330° unobstructed rotation if the transformer kit is installed). Additional mounting points are located on the rear of the enclosure for use with an Omnimount™ type bracket. An available 70.7/100-V transformer kit may be easily mounted over the input panel for use in distributed systems. All of these features give you the flexibility to address a large range of venues, while quickly and precisely supporting customer requirements. 1 Half-space measurement. 2 EIA RS-426A, tested for eight hours. EVU-2062/95 Loudspeaker System Frequency Response & Impedance: Horizontal Off-Axis Frequency Response: 200001000010001005020316100103.16708090100110Frequency (Hz) Sensitivity (dB)Impedance (Ohms) Passive Mode, Half SpaceImpedance 205010010001000020000708090100110Frequency (Hz) Sensitivity (dB) On Axis5° Horizontal10...
Эта инструкция также подходит к моделям:Автоакустика - EVU-2062/95 (781.36 kb)
Автоакустика - EVU-2062/95 (781.36 kb)
Автоакустика - EVU-2062/95 (781.36 kb)
Автоакустика - EVU-2062/95 (781.36 kb)