Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Speaker setting
Safety precautions
Make sure to make this setting when using for the first time after purchase.
Placement
Link the front speakers (SC-ZT2) wirelessly first and then
Set the system up on an even surface away from direct sunlight, high temperatures, high
make the settings for the surround speakers.
humidity, and excessive vibration. These conditions can damage the system and other
components, thereby shortening the system’s service life.
Preparations
Do not hang from or climb on the system. This may result in serious injury.
Do not use this device in hospitals and other places where electric medical devices are
• Make sure that all equipment has been turned off.
installed.
ENGLISH
(When the VIERA Link “HDAVI Control” compatible Panasonic
Do not use this device near automatic doors, fire alarms and other automatically controlled
TV (VIERA) and Blu-ray Disc player/DVD recorder (DIGA) are
apparatuses.
connected, do not turn on TV (VIERA) and Blu-ray Disc player/DVD
Do not hold the speaker with one hand.
recorder (DIGA) until the setting is complete.)
Before attaching the leg cushion on the base parts to prevent tilt or rattle on the floor, make
• Connect AC mains leads of main unit (SC-ZT2) and 4 speakers
sure there are no people in the surrounding area.
to household mains sockets. (➜ page 14 of SC-ZT2 Operating
Do not insert your hand or foot into the opening of side surface of base part.
Instructions and left page of this manual)
Do not turn on the speakers with foot or vacuum cleaner carelessly.
fi
cations
• Make sure that the main unit (SC-ZT2) and speakers have been turned off.
Do not use this device as a plaything.
• Prepare the remote control (SC-ZT2). (➜ page 8 of SC-ZT2
Voltage
Operating Instructions)
Do not use high voltage power sources. This can overload the system and cause a fire.
1. Turn the main unit (SC-ZT2) on.
Do not use a DC power source. Check the source carefully when setting the system up on a
2. Turn on the front speakers (SC-ZT2).
ship or other place where DC is used.
• The colour of [WIRELESS LINK] indicator of front speaker
AC mains lead protection
changes from red to green.
Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead
• Do not turn on the surround speakers yet at this point. The colour
damage can cause fire or electric shock. Do not pull, bend, or place the system on the lead.
of [WIRELESS LINK] indicator does not change from red to green
Grasp the plug firmly when unplugging the lead. Do not move the system if AC mains lead is
even if the power is turned on.
still connected to socket outlet. Pulling the AC mains lead can cause electric shock.
3. Set “4CH ” at the setting operation of “Changing the number of
Do not handle the plug with wet hands. This can cause electric shock.
speakers to 4”. (➜ page 17 of SC-ZT2 Operating Instructions)
Remove AC mains plug from socket outlet when not using for a long period.
4. Turn the main unit (SC-ZT2) off once.
Foreign matter
5. Turn the main unit (SC-ZT2) on again.
Do not let metal objects fall inside the system. This can cause electric shock or malfunction.
• “4CH SEARCH ” appears on the display. (This is displayed only
Do not let liquids get into the system. This can cause electric shock or malfunction. If this
at the first-time setting.)
occurs, immediately disconnect the system from the AC mains lead and contact your dealer.
6. Turn on the surround speakers.
Do not spray insecticides onto or into the system. They contain flammable gases which can
• The colour of [WIRELESS LINK] indicator of surround speaker
ignite if sprayed into the system.
changes from red to green.
Service
• When the [WIRELESS LINK] indicator of each speaker lights
Do not attempt to repair this unit by yourself. If sound is interrupted, indicators fail to light,
green, “4CH SEARCH ” display disappears.
smoke appears, or any other problem that is not covered in these instructions occurs,
7. Press and hold [CH] on the remote control (SC-ZT2) about 3 seconds
disconnect the AC mains lead and contact your dealer or an authorized service centre.
until “4 SPKR SET ” is displayed on the main unit’s display.
Electric shock or damage to the system can occur if the system is repaired, disassembled or
• Always aim the remote control at the main unit for operation.
reconstructed by unqualified persons.
8. Press the remote control (SC-ZT2) button corresponding to
Extend operating life by disconnecting the system from the AC mains if it is not to be used for
the speaker outputting the confi rmation sound.
a long time.
Speaker (➜ left page)
Corresponding buttons (➜
page 17 of SC-ZT2 Operating
Instructions)
Speaker setting/Maintenance/Safety precautions/Speci
Specifi cations
Front speaker (left)
: [GAME]
Front speaker (right)
: [MUTE]
Power supply differ depending on the symbols (E, GN, GS) indicated
on the packaging box.
Surround speaker (left)
: [–SETUP, OFF]
g POWER AMPLIFIER SECTION∗1
Surround speaker (right)
: [ RETURN]
RMS output power (at AC 220 to 240 V)
• Sound is output from either of the speakers.
10 % total harmonic distortion
• When you press the button corresponding to the confirmation
Woofer Speaker ch
60 W (100 Hz, 3 Ω)
sound of speaker, another speaker outputs confirmation sound.
Mid High Speaker ch
20 W (1 kHz, 8 Ω)
Press the corresponding button in the same way and complete
System Total Power∗2
160 W (80 W + 80 W)
settings for all 4 speakers.
DIN output power (at AC 220 to 240 V)
• When “COMPLETE ” disappears on the main unit’s display, the
1.0 % total harmonic distortion
speaker setting is complete.
100 Hz
Woofer Speaker ch
40 W (3 Ω)
1 kHz
Mid High Speaker ch
15 W (8 Ω)
Note
System Total Power∗2
110 W (55 W + 55 W)
g SPEAKER SECTION∗1
• Check if the speakers are properly set after setting the speakers.
2 way 5 speakers system (Bass reflex type)
(➜ page 16 of SC-ZT2 Operating Instructions)
Woofer part
12 cm cone type x 1
• If the speakers are set incorrectly in step 8, turn the main unit (SC-
Mid High part
2.4 x 10 cm flat type x 4
ZT2) off then on again and perform steps 7 and 8.
g SPEAKER GENERAL∗1
• If [WIRELESS LINK] indicator does not change from red to green, see
Power supply
For E, GN
AC 220 to 240 V, 50 Hz
page 29 of SC-ZT2 Operating Instructions, “Troubleshooting guide”.
For
GS
AC 110 to 240 V, 50/60 Hz
Power consumption
20 W
• When you turn the main unit (SC-ZT2) off with the speakers on, the speakers automatically
enter standby (Wireless link standby). The colour of [WIRELESS LINK] indicator turns to red.
Wireless link standby
0.8 W
• To reduce more of the power consumption of speakers in standby, turn
In standby condition
0.15 W
the speakers off. The speakers enter standby (In standby condition).
Dimensions ( W × H × D )
290 mm × 1231 mm × 290 mm
Mass
Approx. 3.9 kg
Wireless link standby: approx. 0.8 W (per 1 speaker)
Operating temperature range
0 °C to 40 °C
In standby condition: approx. 0.15 W (per 1 speaker)
Operating humidity range
20 % to 80 % RH (no condensation)
g WIRELESS SECTION
Frequency of the using band
2.4000 GHz to 2.4835 GHz
Maintenance
Number of using channels
3
Unplug the AC mains lead from the household mains socket and wipe
The reaching distance
15 m∗3
the system using a soft and dry cloth.
∗1: per 1 speaker
∗2: use 2 speakers
• When the system is very dirty, wring the cloth soaked in water
∗3: It is under the condition as follows.
thoroughly, wipe the dirt and wipe moisture off with a dry cloth.
At same room indoor, there is not an obstacle between the main unit and the speaker.
• Do not use solvents such as benzine, thinner, alcohol, etc. because
And installing a main unit in the position with equal to or more than 50 cm height.
they may cause casing to deform and coating to come off.
VQT2R77
Note: 1. Specifications are subject to change without notice.
• Before using chemically treated cloth, read the instructions that
2.
Total harmonic distortion is measured by the digital spectrum analyser.
come with the cloth carefully.
3.
Total harmonic distortion is measured by using AES17 filter.
5
5
...