Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Caution for AC Mains Lead
Dear customer
(For United Kingdom)
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
(“EB” area code model only)
carefully.
For your safety, please read the following text carefully.
These operating instructions are applicable to the following system.
Unless otherwise indicated, illustrations in these operating instructions
This appliance is supplied with a moulded three pin mains plug for
are of SC-AK220 for South Africa and Middle East.
your safety and convenience.
A 5-ampere fuse is fitted in this plug.
System
SC-AK220
Should the fuse need to be replaced please ensure that the replacement
fuse has a rating of 5-ampere and that it is approved by ASTA or BSI
Main unit
SA-AK220
to BS1362.
Speakers
SB-AK220
Check for the ASTA mark
or the BSI mark
on the body of the
fuse.
If the plug contains a removable fuse cover you must ensure that it is
refitted when the fuse is replaced.
Safety precautions
If you lose the fuse cover the plug must not be used until a replacement
cover is obtained.
Placement
A replacement fuse cover can be purchased from your local dealer.
Set the unit up on an even surface away from direct sunlight, high
CAUTION!
temperatures, high humidity, and excessive vibration. These
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
conditions can damage the cabinet and other components, thereby
THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE
shortening the unit’s service life.
Do not place heavy items on the unit.
SHOULD BE REMOVED AND THE PLUG CUT OFF AND
DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK
Voltage
IF THE CUT OFF PLUG IS INSERTED INTO ANY 13-
Do not use high voltage power sources. This can overload the unit
AMPERE SOCKET.
and cause a fire.
Do not use a DC power source. Check the source carefully when
If a new plug is to be fitted please observe the wiring code as stated
setting the unit up on a ship or other place where DC is used.
below.
If in any doubt please consult a qualified electrician.
AC mains lead protection
IMPORTANT
Ensure the AC mains lead is connected correctly and not damaged.
The wires in this mains lead are coloured in accordance with the
Poor connection and lead damage can cause fire or electric shock.
following code:
Do not pull, bend, or place heavy items on the lead.
Blue: Neutral, Brown: Live.
Grasp the plug firmly when unplugging the lead. Pulling the AC
As these colours may not correspond with the coloured markings
mains lead can cause electric shock.
Do not handle the plug with wet hands. This can cause electric
identifying the terminals in your plug, proceed as follows:
shock.
The wire which is coloured Blue must be connected to the terminal
which is marked with the letter N or coloured Black or Blue.
The wire which is coloured Brown must be connected to the terminal
Foreign matter
which is marked with the letter L or coloured Brown or Red.
Do not let metal objects fall inside the unit. This can cause electric
shock or malfunction.
WARNING: DO NOT CONNECT EITHER WIRE TO THE
Do not let liquids get into the unit. This can cause electric shock or
EARTH TERMINAL WHICH IS MARKED WITH THE LETTER
malfunction. If this occurs, immediately disconnect the unit from the
E, BY THE EARTH SYMBOL i OR COLOURED GREEN
power supply and contact your dealer.
OR GREEN/YELLOW.
Do not spray insecticides onto or into the unit. They contain
flammable gases which can ignite if sprayed into the unit.
THIS PLUG IS NOT WATERPROOF–KEEP DRY.
Before use
Service
Remove the connector cover.
Do not attempt to repair this unit by yourself. If sound is interrupted,
How to replace the fuse
indicators fail to light, smoke appears, or any other problem that is not
covered in these instructions occurs, disconnect the AC mains lead
The location of the fuse differ according to the type of AC mains plug
and contact your dealer or an authorized service center. Electric shock
(figures A and B). Confirm the AC mains plug fitted and follow the
or damage to the unit can occur if the unit is repaired, disassembled
instructions below.
or reconstructed by unqualified persons.
Illustrations may differ from actual AC mains plug.
Extend operating life by disconnecting the unit from the power source
if it is not to be used for a long time.
1. Open the fuse cover with a screwdriver.
Figure A
Figure B
(Back of product)
Fuse cover
2. Replace the fuse and close or attach the fuse cover.
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
Figure A
Figure B
Fuse
Fuse
(5 ampere)
(5 ampere)
Inside of product
Tuotteen sisällä
2
Produktets innside
RQT7531
...