Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
This WILL DAMAGE the LED bulbs and WILL void your warranty. 3 Audio InputTerminalsIlluminite LightingInput TerminalsLighting Hook-Up From RearHead unit12 volt sourceGround XNP - SBX SERIES INSTALLATION Lighting Hook-Up Recommendations The illuminite lighting elements of your XiN series products provide you with a unique custom touch to your vehicle. Dual’s patent pending illuminite bulb system and control circuitry provides an extraordinary lighted-Hue illumination which allows great creative opportunities for the beginner and seasoned custom installer alike. The interior of your vehicle will never sound or look ordinary again. Let your imagination take you there. The lighting features of all illuminite products require a 12 volt power source to operate. The speaker has two distinct sets of input terminals. The first is labeled audio input terminals and the second is labeled illuminite lighting inputs. The inputs are clearly marked with a label positioned directly above the terminal housing. The polarity (+ and -) indicators for each set of inputs also appear on these labels. 1. Do not connect Amplifier or any audio source to illuminite lighting inputs. Inputs are designed for switched 12 volt power source only. More then 3V rms connected to illumination inputs can cause permanent damage to the lighting elements. 2. See fig. 1a, (illustrates wiring diagram) be sure to maintain polarity. Be sure to connect to a constant switched 12 volt source. Correct connection would be the positive (+) 12 volt wire to the Positive (+) illuminite Lighting input terminal and connect the Negative (-) illuminite lighting input terminal to a good chassis ground. Fig 1a Notice: The Illuminite™ series LED illumination elements are not removable. There are no serviceable parts inside or attached to the speaker assembly. The Illuminite™ series products are sensitive electronic devices. Removal or tampering with any part or portion of the speaker and/or its assemblies will damage the product and void the limited warranty. 4 XNP - SBX SERIES INSTALLATION Mounting 1. Determine where the speakers will be mounted. Ensure an area large enough for the speaker to mount evenly. Be sure that the mounting location is deep enough for the speaker to fit. 2. Refer to the specification chart to determine the proper diameter hole to cut for your speaker model. 3. If supplied, use the plastic mounting ring as a template to mark the locations for the mounting screws. Drill the holes with a 1/8" bit. 4. Be sure to observe proper polarity when connecting the wires. The speaker's positive terminal is indicated with the “+” symbol. 5. Fit the ring and speaker to the cut-out. Mount them using the enclosed screws. If supplied, fit the grille inside the ring and press gently, but firmly, into place and attach with screws. 5 XNP - SBX SERIES INSTALLATION Mounting Legend 6 XNP - SBX SERIES SPECIFICATIONS Notes 7 XNP - SBX SERIES WARRANTY Limited One-Year Warranty This warranty gives you specific ...
Эта инструкция также подходит к моделям:Автоакустика - illumiNITE SBX553 (165.61 kb)
Автоакустика - illumiNITE SBX653 (165.61 kb)
Автоакустика - illumiNITE XNP553 (165.61 kb)
Автоакустика - illumiNITE XNP653 (165.61 kb)