Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Do not touch the power cord with wet hands. 15. bedding* Do not obstruct the ventilation holes* Do not tilt the unit or turn upside down Extended non-use Do not place the power cord near heating If the unit is likely to be unused for an equipment and do not use the unit. If the extended period, shut off power and plug fits loosely in an electric outlet or the plug or cord is hot. If the cord is damaged 16. disconnect from power supply. Volume Adjustment replace it as continued use may result in fire If abnormal noise is produced during play at or electric shock. high volume, reduce the volume level. 11. Unit plug Distorted sound can cause overheating of Insert the plug into an outlet all the may to its speakers and amplifier. Before switching -4 power supply minimum. Sudden, damage to hearing. 17. Connecting TV/other When connecting a TV or equipment, always shut off power, operating manual for each device the instructions for connection. Use designated cables. Use of non-designated cables or extension cables can cause heat production, burns, and fire. 18. Antenna An outdoor antenna should be located away from power lines. 19. Maintenance. Before undertaking maintenance disconnect from power supply. Have the interior of the unit cleaned approximately once a year by qualified personnel. Accumulated dust inside and long intervals without cleaning can cause fire or malfunction. Before cleaning this product make sure that the power is turned off and the power cord is disconnected from the wall outlet. Clean with a soft cloth. If the product is particularly dirty, moisten the cloth and wring out before use. Complete by wiping with a soft, dry cloth. Do not use liquid solvents such as alcohol or thinner to clean this product, as such chemicals can damage the cabinets. 20. Servicing The unit should be serviced by qualified personnel when: * The power-supply cord or plug has been damaged, or * Objects or liquid have entered the unit, or * The unit has been exposed to rain; or * The unit is malfunctioning, or * The unit has been dropped or the cabinet has been damaged. 21. Children Use particular care in households where children are present. 22. Temporary Fault If this product receives a strong external shock (such as from an impact, static electricity or a power surge due to lightning), or if this product is used incorrectly, it may stop working properly. In such cases, press the power button to turn the power and check if this ENGLISH -5 ENGLISH Notes ¦ Volume Setting Before switching ON minimise Sudden, large output can damage speakers. ¦ Volume Etiquette To avoid disturbance in your neighbourhood, enjoy your unit at an appropriate volume. Remember that at night, even low volume carries into surrounding areas. Help to maintain a pleasant living environment. -6 Part Names . . . . . . . . . . . . ENGLISH . Volume adjustment knob This knob is used to adjust the volume. . L.P.F. adjustment knob This knob is used to adjust (cut) high-range frequencies. The adjustment range is 40--200 Hz. . This knob position is 120Hz in the center. . Automatic power switch This switch turns the automatic power function on and off. When the automatic power switch is ON, the . . . . automatic power function operates and the unit switches to standby mode if no input signal is received during a 5-minute period. (The power indicator will change from blue to red. ) When an input sinal is received once more, the power will turn back on automatically. (The power indicator will change from red to blue. ) If this unit is used for signals at extremely low volumes, set this switch to OFF to prevent incorrect operation. -7 ENGLISH . Phase select This switch is used phase. The ambience of the sound may change when the position changed. The effects will change depending speaker combination being used and setting-up environment, so listen to the being played back and select the switch setting that provides the most natural playback. . When you change a switch , please make volume small for noise prevention. . Power switch This switch turns the power on and off. . LINE IN terminal This terminal is used to input signals that are output from the LINE OUT terminal of a sub-woofer (super woofer) of an AV amplifier or directly from an amplifier. . LINE OUT terminal This terminal outputs the signals that are input to the terminal in 6. above. It can be used when another unit or 508PA connected to this unit. (The volume adjustment knob of this unit will not work for both units.) . Power input terminal This terminal is used to connect the unit via the attachment power cord to a 230 V household electrical outlet. -8 Connection . 5.1ch system example . ¦ Player+AV amplifier+307+307 307 . Please purchase an optional cable in a nearby store. . When the sub woofer output of an AV amplifier has only 1ch, please connect one of the terminals to the line in terminal. Or please connect with both of line in terminals using a branch cable (option). . Please decrease the...
Эта инструкция также подходит к моделям:Автоакустика - 316SW (111.56 kb)