Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Make sure your DVD system and TV are connected and turned on!
Plug & Play
1
Turn on the system.
“AUTO INSTALL - PRESS PLAY” will be displayed.
2
Press PLAY 2; on the system to start installation.
Playing a disc
3 Press DISC1/2/3 on the remote control.
You can also select the DISC (DISC10203) on the front panel.
4 Turn on the TV and select the correct Video In mode.
You should see the blue Philips DVD background screen on the TV (If no disc in the DVD
system).
5
Press OPEN0CLOSE 0 on the front of the DVD system and load discs, then press
the corresponding OPEN0CLOSE 0 again to close the disc tray.
Make sure the disc label is facing up. For double-sided discs, load the side you want to play face
down.
6
Playback will start automatically.
If a disc menu appears, use 1/¡/5/4 buttons on the remote to make the necessary selection,
then press OK to confirm. Or, use the numeric keypad on the remote to select features. Follow
the instructions given in the disc menu.
7
To stop playback, press STOP 9.
Region Codes
DVDs must be labeled for ALL regions or Region 1,
1
ALL
in order to play on this DVD system.
You should find the below accessories in the packaging box.
Component video cables
Audio cables
(red, blue, green)
AM loop
(white, red)
FM wire antenna
antenna
Composite video cable
AA size
AC power cable
DIN out cable
(yellow)
batteries
Detailed playback features and additional functions are described in the
accompanying owner’s manual
FWD798-37QUG_Eng
2
2006.4.26, 2:06 PM