Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
However, you don’t have to read the whole manual before obtaining guidance to your first destination. The following summary indicates which chapters you should read now and which you can come back to later. Read the chapters marked * before attempting to obtain guidance to your first destination. 1. Basic Operation* Read this chapter after going through the setup process. It explains what you see on the dis play and how to use the menus. You will then be ready to navigate to your first destination. 2. Setting a Route to Your Destination* This chapter describes a number of ways to choose a destination. Choose the one that suits your first destination and read that section; you can then come back and read the rest of the chapter later. 3. Guidance to Your Destination* Before actually setting out toward your chosen destination, read this chapter to learn how to interpret the guidance given by your Navigation System. 4. Utilising Various Information This chapter provides information about the various information available. Read it to learn more about the useful features available to you. 5. Customising Your Navigation System The behaviour of your Navigation System depends on a number of settings. If you need to change any of the initial settings (default settings), read the relevant section of this chapter. 6. Combining and Using Pioneer AV Equipment If the Pioneer display, “AVH-P6400CD” or “AVH-P6400R”, and Pioneer audio equipment are connected to your Navigation System, you can operate the audio equipment using the Remote Control of your Navigation System. This chapter describes the basic audio operation and how to operate audio or DVD with voice. 7. Operating Your Navigation System with Voice This chapter gives details of the voice recognition capabilities of your Navigation System. Read it when you are ready to begin giving voice commands while under guidance. Appendix Read the appendix to learn more about your Navigation System, the technology it uses, and such information as the availability of after-care. Please see “Display Information” in the end of this manual for checking the details of each item on the menu. Operation of DVD player The method of operating DVD player is slightly different between the built-in DVD player of this unit (AVIC-9DVDII and AVIC-9DVD) and the Pioneer DVD player. See the following sections for the detailed difference of operation: • Operation manual of the DVD player • DVD Operation Reference Table (end of this manual) Terminology Before moving on, take a few minutes to read the following information about the conventions used in this manual. Familiarity with these conventions will help you greatly as you learn how to use your new equipment. • Buttons on your Remote Control are referred to as: NAVI button, MENU button. • Items in various menus are referred to like this: “New Destination” and “Settings”. • Extra information, alternative use and other notes are presented like this: . After removing the disc from the slot, keep it in the case. For “AVIC-9DVD” or “AVIC-8DVD” users This manual describes the operation based on “AVIC-9DVDII” or “AVIC-8DVDII”. If you use “AVIC-9DVD” or “AVIC-8DVD”, some button names of the Remote Control may be different from this manual. If you use “AVIC-9DVD” or “AVIC-8DVD”, check the operation of your Remote Control by referring to “Dipswitch settings for AVIC-9DVD and AVIC-8DVD” and “About the difference in the operation of the Remote Control” below. Dipswitch settings for AVIC-9DVD and AVIC-8DVD Set the dipswitches as following. ON ON 12 3 4 OFF Switch 1: ON Switch 2: ON Switch 3: OFF Switch 4: ON or OFF About the difference in the operation of the Remote Control (AVIC-9DVD) If the Remote Control included with AVIC-9DVD is used, there will be the following changes in operation: Using PGM Function You can use the PGM Function. However, even if the Operation mode switch is set to “DVD”, you cannot turn the DVD power On/Off. Starting voice operation Press the joystick while the Operation mode switch is set to “NAVI”. (It is canceled if the mode is set to “DVD”.) Switching screen display (display of frequency, etc.) You cannot do this with the Remote Control included with the AVIC-9DVD. If the AV Head Unit is combined, you can do this with the AV Head Unit. Playing the Built-in DVD player Press the control stick while the Operation mode switch is set to “DVD”. Frame by frame playback and slow motion playback Push the control stick up while the Operation mode switch is set to “DVD”. Reverse frame by frame playback and reverse slow motion playback (in case of XDV-P9 and XDV-P9— ————) You cannot do this with the Remote Control included with AVIC-9DVD. However, you can operate this function using the Remote Control included with the DVD player or the AV Head Unit. Switching DVD information screen (Built-in DVD player only) Press the Display button (CANCEL ROUTE button) while the Operation mode switch is set to “DVD”. The display switches over as you pre...
Эта инструкция также подходит к моделям:Авто GPS навигаторы - AVIC-65DV-2 (3.8 mb)
Авто GPS навигаторы - AVIC-70D-2 (3.8 mb)
Авто GPS навигаторы - AVIC-75DV-2 (3.8 mb)
Авто GPS навигаторы - AVIC-80DH-2 (3.8 mb)