Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Return to the Top page Bluetooth Operation Key word voice registration You canregisteryourvoicefor thevoice recognitionfeaturewhich linkstothe phonebook categoryinformation. Touch [SET] of [Key Word] in the Hands Free SETUP screen. Key Word List screen appears. Select desired phone number category from the list and touch [Record]. Key Word Recording screen appears. NOTE • The phone number with a voice already registered will show the “REC” icon as active. • Touching [Play] plays the voice registered in the selected phone number category. This key does not appear for . • Touching [Delete] deletes the voice registered in currently selected category. After you touch [Delete], a confirmation message appears. Follow the message and complete the operation. This key does not appear for . Say the phone category within 2 seconds after a beep and touch [Record]. (1st try) 3 Say the phone category again within 2 seconds after a beep. (2nd try) 4 If successful the message appears and the voice registration ends. NOTE • A message appears if the voice is not recognized. Read the message for the further operation. • Repeat from 1st try if the voice is different from the 1st try. Return to the Top page Setting Up Setting Up Monitor Screen Setup You can adjust image qualityin iPod video, picturefile,menu screen, etc. Press the button instructed in each diagram when the desired screen is displayed. Press for 1 second Screen Control screen appears. Adjust each item as follows. Bright/Tint/Color/Contrast/Black/ Sharpness Adjusts each item. Dimmer Select dimmer mode. ON: The display and buttons dim. OFF: The display and buttons do not dim. SYNC (Default): Turns the dimmer function on or off when the vehicle light control switch is turned on or off. NAV-SYNC: Turns the dimmer function on or off according to the Navigation Day/Night display setting. Mode (Playback screen only) Select screen mode. Full: Full picture mode Just: Justify picture mode Zoom: Zoom picture mode Normal: Normal picture mode NOTE • Adjusting items are different depending on the current source. • You can perform this function only when you have applied the parking brake. • The image quality can be set for each source. System Setup System Setup NOTE • Each operation in this section can be started from the multi function menu. Touch [Menu] on any screen. 1 TOP Menu screen appears. Touch [SETUP]. 2 Touch [System]. 3 System Menu screen appears. See the following section for each setting. • Set up the user interface (P.71) • Adjust touch panel (P.72) • Set up security (P.72) • Set up external switch (P.73) • Set up memory (P.73) User interface You can setup user interfaceparameters. Touch [User Interface] in the list. 1 User Interface screen appears. Set each item as follows. 2 Return to the Top page Setting Up Beep Turns the key touch tone on or off. Default is “ON”. Remote Sensor Selects a remote control signal. Default is “ON”. Language Select the language used for the control screen and setting items. See Language setup (P.72). Text Scroll Allows scrolling of text display on the source control screen. Select from “Auto”/”Once”/”OFF”. Auto (Default): Scrolls the text automatically. Once: Allows you to scroll the text only once automatically when updated. OFF: Does not scroll the text automatically. Drawer Close Sets whether to close the common menu (P.16) automatically. Default is “Auto”. Animation Sets whether to display animation. Default is “ON”. Secondary Sets whether to display the navigation information in the audio screen or vice versa. Default is “ON”. Panel Switch Sensitivity Adjusts the sensitivity of the front panel button (ATT button, etc.) High: Sets sensitivity to high. Middle (Default): Sets sensitivity to middle. Low: Sets sensitivity to low. Return to the Top page Setting Up Language setup Touch [SET] of [Language] in the User Interface screen. Language Setting screen appears. Set each item as follows. Select Mode Selects the mode to select a language. Easy (Default): Selects a language easily. Advanced: Allows you to select languages for respective items.* Language Select Selects a language. *Ifyou select[Advanced]forSelectMode, thefollowing screen appears. GUI Language Select: Selects the display language used for the control screen and so forth. Navigation Language Select: Selects the language used for navigation. Text Language Select: Selects the language used for tag text (song information). Touch [Enter]. NOTE • To cancel the language setup, touch [Cancel]. Touch panel adjustment Touch [Touch] in the System Menu screen. 1 Touch Panel Adjustment screen appears. Follow the instruction on the screen and touch the center of each . 2 NOTE • To cancel the touch panel adjustment, touch [Cancel]. • To reset to the initial status, touch [Reset]. Security setup Ared indicator will blink on the unit after the ACCis settoOFF,warningpotential thieves. Ifturnedto“ON” (default),the security indicator on the frontpanel flashes when the vehicleignitionis...
Эта инструкция также подходит к моделям:Авто GPS навигаторы - DNX5180 (2.67 mb)
Авто GPS навигаторы - DNX6040EX (2.67 mb)
Авто GPS навигаторы - DNX6180 (2.67 mb)
Авто GPS навигаторы - DNX6480BT (2.67 mb)