Оценок - 3, средний балл: 5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
If turned "ON", the burglar alarm lamp flashes when the vehicle ignition is off. ( "ON") 2 Start Security Code setup . • If you have already completed the code registration, is displayed. 3 Enter a security Code Input four-digit number. 4 Register your security code 5 Reenter the security code Reenter the same security code as that you have entered in Step 3 for confirmation. . • If you enter a different security code, the screen returns to Step 3 (for the first code entry). 6 Register the security code again Now, your security code is registered. If you press the Reset button or if you disconnect your receiver from the battery after the code registration, you need to enter the registered security code. If you have pressed the Reset button or if you have disconnected the Receiver from battery... 1 Enter the correct security code You must enter the same security code as that you have entered in Step 3. 2 Enter the security code Now, you can use your Receiver. DNX5240BT/DNX5240/DDX5024/DDX5054/DDX54R Deactivating Security Code To deactivate the Security Code function. 1 Display Security Code Setup screen Touch in the "Setup Menu" screen (page 56). 2 Start to cancel a registration of the Security Code 3 Enter a security Code Input by four-digit number. Register your security code 4 Now, your security code is cleared. iPod Setup Performs setup when using iPod. 1 Display the iPod Setup screen Touch in the "Setup Menu" screen (page 56). 2 Setup each item 1 2 1Sets the Audio book playback speed. 2Sets Wide Screen on or off. . • "Wide Screen" cannot be set while the iPod is connected. English Setup Menu TV Setup The TV signal receiving areas can be set. (with the optional accessory TV Tuner connected only) 1 Displaying TV Setup screen Touch in the "Setup Menu" screen (page 56). 2 Setting up TV 1 2 1Moves to "TV2 Area Set 2" screen. 2Sets the present TV1 receiving area. 3 4 3Returns to the "TV1 Area Set 1" screen. 4Sets the present TV2 receiving area. RDS Setup You can set RDS related parameters. 1 Display the RDS Setup screen Touch in the "Setup Menu" screen (page 56). 2 Setup each item 1 2 3 4 5 1 Moves to "RDS Setup 2" screen. 2 Sets a news bulletin interrupt time. 3 Turns the Alternative Frequency function On or Off. ( "ON") 4 Turns the Region Restriction function On or Off. ( "ON") 5 Turns the Auto TP Seek function On or Off. ( "ON") 6 7 6Returns to the "RDS Setup 1" screen. 7Selects a display language for the PTY function. DNX5240BT/DNX5240/DDX5024/DDX5054/DDX54R Bluetooth Setup Registers and selects Bluetooth unit. 1 Display the Bluetooth Setup screen Touch in the "Setup Menu" screen (page 56). 2 Setup each item 1 2 1Sets cell-phone for Hands Free and Audio player for Bluetooth Audio. 2Sets the PIN code of this unit (DNX5240BT only) or KCA-BT200 to enter when registering (pairing) from the cell-phone or audio player side. Registering Bluetooth Unit Registers the Bluetooth unit to be connected. 1 Display the Connect Device List screen 2 Search for a Bluetooth unit 3 1 2 4 5 1 Displays the registered Bluetooth unit. Displays the busy service in red. Displays the available service in gray. 2 Scrolls the name of the Bluetooth unit. 3 Searches for Bluetooth unit. 4 Registers Bluetooth unit that cannot be registered by normal register (paring) operation. 5 Returns to the previous screen. . • A new device cannot be registered if there are 5 registered Bluetooth units. Delete unnecessary registration. See
Авто GPS навигаторы - DDX5024 (5.75 mb)
Авто GPS навигаторы - DNX5240 (5.75 mb)