Polarity is indicated by a color stripe on the insulation, by ridges molded into the insulation, or by the colors of the wire - one copper and one silver. Strip the insulation from the speaker wire ends to reveal the bare conductors before connecting to a speaker, subwoofer or receiver. Always connect the red (+) terminal on the receiver to the red (+) terminal on the Subwoofer, and connect the black (-) terminal on the receiver to the black (-) terminal on the Sub- woofer. The same is true for

SOUND Button (On Remote Control Only) This button allows you to switch on/off 3D surround effect. / (Play/Pause) (On Remote Control Only) – Press this button on the remote control to begin playback on your iPad/iPhone/iPod. Press again to Pause playback. / Skip Forward/Back buttons (On Remote Control Only) - During playback press to skip forward or backward to the next or previous track. MENU button (On Remote Control Only)- If an iPod is docked and the Acoustic Research Dock Plus App is not run

2 II. Connecting the speaker system………..……………………………….. 3 III. Adjusting the transmitter………..………………………………………. 5 IV. Tuning the speakers………..…………………………………………….. 6 V. Turning the speakers off………..………………………………………... 7 VI. Recharging the batteries………..……………………………………….. 7 VII. More helpful information ………..……………………………………… 7 VIII. Troubleshooting………..……………………………………………........ 9 IX. Specifications & Features ………..……………………………………… 10 X. Warranty ………..…………………………………………….................. 11 Introduction AR

If this occurs, please see the troubleshooting section of this manual. Speaker Side View Left/Mono/Right Slide Switch Speaker Side View Left/Mono/Right Slide Switch 2. Adjust the volume on the speaker as desired. 3. Set up the speaker for mono or stereo operation. a) Monaural operation: The monaural mode(MONO) is recommended when using a single AW822 by itself. For monaural operation, set the L/MONO/R switch to “MONO” on each speaker. b) Stereo operation: You need an additional AW822 speaker for

CAUTION Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The apparatus shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus. FCC Statement This equipment has been tested and found to comply with the limits for a

2. Insert the small, round plug from the speaker AC power adapter (M) into the speaker power input jack (C). 3. Plug the other end of the speaker AC power adapter into any standard 120V AC wall outlet. Note: Be sure to use the speaker AC power adapter rated 18V DC 700 mA. 1. Turn the speaker volume down by rotating the power/volume/scan control (B) on the side of the speaker all the way to the left. 2. Remove the battery compartment cover (G) on the bottom of the speaker. 3. Insert eight (8) C-c

17 EN Connecting the Video Cord to View a Video/Picture from iPad/iPhone/iPod When viewing a video/picture from iPad/iPhone/iPod on your TV, use a component video cord (not supplied) to connect the COMPONENT VIDEO OUT jack on the unit and the component video input on your TV. • After you have connected the unit, change the video input mode on your TV. For details, also refer to the instruction manual for your TV. The below diagram shows the connection options available. TV To Component input of

You are encouraged to download and install this app (right on your ¡Pad/iPhone/iPod) in order to enjoy the wide variety of features which are available with the Acoustic Research Dock Plus App. App is for ¡Pad/iPhone/iPod touch only (iOS 3.0 or higher). Note the Acoustic Research Dock Plus App must be running and visible while your ¡Pad/iPhone/iPod is docked in order for many of the additional features such as alarms and FM radio to properly operate. Launch the app by touching the app icon on

The warranty does not extend to the elimination of externally generated static or noise, to costs incurred for the installation, removal or reinstallation of the product. The warranty does not apply to any product or part thereof which, in the opinion of the company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident or exposure to moisture. This warranty does not apply to damage caused by an AC adapter not provided with the product, or

b) Stereo operation: You need an additional AW850 speaker for the stereo option. Set the L/M/R switch to “L” on the speaker located to the left from the listener, and set the other speaker to the “R” position. Notes: A single AW850 transmitter can send its signal to more than two speakers. All you need to do is tune the speakers to the single transmitter. The speaker automatically retunes if it loses the transmitter’s signal. You can also press the Auto Scan button on the bottom of the speaker t