Оценок - , средний балл:
(
)
)
Производитель: iHome
Размер: 549.36 kb
Название файла: 93963f01-1302-4a16-8779-4004945e734e.pdf
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
Modifying or tampering with your system’s internal components can cause a malfunction and might invalidate the system’s warranty and void your FCC authorization to operate it. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. Battery Information For Model Included Battery More Than One Piece • Do not mix with used or other battery types/brands • Replace all cells at the same time • Do not open batteries • Do not dispose of in fire • Do not heat above 75.C (167.F) • Do not expose contents to water • Do not charge or recharge • Do not install backwards Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. • Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the unit. off on iP29 Quick Start 1 1:batteries 2:AC adaptor Open battery compartments located to left and right inside unit. Insert 4 “AA” batteries (not included) as indicated on diagram. Unit can now play iPod/iPhone. Batteries will not charge iPod/iPhone. 4:iPod/iPhone NOTE: If you do not have an insert for your iPod, please visit or call iHome toll free at 800-288-2792 to purchase one off on 3:inserts Connect AC adaptor to the DC jack (rear of iP29) and plug the other end into a working wall socket to charge and play iPod/iPhone. Does not charge batteries. Gently place iPod/iPhone on the connector plug in dock. Slide Power Switch to ON. Unit and iPod/iPhone will turn on. Adjust volume by pressing the + or – Button. Select the dock insert for your iPod/iPhone model from the table above and place insert in dock. Never dock an iPod/iPhone without an insert in place. iPod touch 2G insert 16 For this iPod touch 2G iPhone/iPod Use this insert iPhone 3G iPhone 3G insert 15 iPod nano 4G insert 17 iPod nano 4G line-in Controls and Indicators Front Panel Rear Panel 2 Line-in Jack Speaker Off/On Switch Volume “_” (lowers volume) Volume “+” (raises volume) AC Adaptor Jack Left Battery Compartment Right Battery Compartment off on Dock line-in Using the iP29 3 Installing/Replacing Speaker Batteries FOR PORTABLE LISTENING 1. Open the battery compartment covers located on the left and right inside the unit. 2. Insert 4 “AA” batteries (2 in each compartment), checking the + and – ends of the batteries match the drawings inside the battery compartments. We recommend the use of alkaline batteries for longer life. Different types of batteries or new and used batteries are not to be mixed. 3. Close the compartment cover. NOTE: Unit will not charge iPod/iPhone while operating on battery power Batteries Information • Do not mix old and new batteries. • Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries. • Make sure you dispose of batteries properly (see your local regulations). Connecting the AC Adaptor Connect the AC adaptor cable plug into the DC jack located under the black tab on the back of the unit, then plug the AC adaptor into the wall outlet. When connected to the AC adaptor, the iP29 charges and lets you play your iPod/iPhone. NOTE: This AC adaptor is for use with the iP29 only. To avoid damage, do not use other adaptors with iP29. Playing and Charging your iPod/iPhone 1. Place proper insert for your iPod/iPhone (see insert table on Quick Start Section) in Dock, then gently dock iPod/iPhone. When docked and connected to AC power, the iPod/iPhone will charge until fully charged. The iPod/iPhone will not overcharge. 2. Switch the Power On/Off Switch to “ON” to play iPod/iPhone and the power on indicator will light up to show iP29 is on. 3. Press the + or – Button to adjust the volume. 4. To switch off the unit, slide the Power On/Off Switch to “OFF”. It will switch off both iP29 and your iPod/iPhone. NOTE: If the Power On/Off Switch is in the ON position when you dock an iPod/iPhone that is paused or off the iPod/iPhone will autoplay (turn on and begin playing). Battery Compartment off on line-in Using iP29 Using iP29 Using the Line-in Jack 1. Plug one end of a standard audio patch cord (not included) into the headphone or line-out jack on your audio device and the other end of the patch cord into the iP29 Line-in Jack. 2. Switch the Power On/Off Switch to “ON” and the power on indicator will light up to show iP29 is on. You need to set your device to play too. 3. Press the + or – Button to adjust the volume. You may need to adjust your device’s volume, too. 4. To switch off the unit, slide the Power On/Off Switch to ‘OFF’. Do remember to switch off your device, too. 4 A Consumer Guide to Product Safety A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed...