Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Models mount cone loudspeakers and/or re-entrant horns as noted. GENERAL DESCRIPTION Model VP60-R. Reinforced, protective baffle assembly provides tamperproof recessed installation of a standard 8" cone loudspeaker or an APF Series re-entrant horn. Horn installation requires adapter plate Model FAMT-6. Trim ring is cast from self-aging aluminum alloy with a tensile strength of 44,000 P.S.I. and features a 3.4" shielding collar to protect the loudspeaker from bashing. The loudspeaker securely mounts to welded studs behind a perforated 22-gauge CRS plate which is then protected by a stainless steel-woven wire-mesh screen positioned 3.8" in front of the plate for direct impact protection. The mesh screen is reinforced by a thick bead of sealant on the inside to protect it against tearing or bending. Rugged unit installs via tamperproof heat-treated alloy screws (special wrench supplied) to specified enclosures. Mounting holes are countersunk for added security. Finish is a satin aluminum with a clear acrylic coating. Models VP161-R8, VP161-R4. Versatile square baffles offer security for 8" or 4" cone loudspeakers respectively. Grilles are cast from special self-aging aluminum alloy with a tensile strength of 44,000 P.S.I. and reinforced with a perforated 22-gauge CRS stud-mounting loudspeaker plate. Optional adapter plate Model FAMT-6 may be added to Model VP161-R8 to facilitate installation of re-entrant horn Series APF-15. Units install to specified recessed or surface enclosures using specially heat-treated alloy screws which are countersunk for security (special wrench provided). Finish is textured white epoxy. Model VP161-APF. Unit is designed for recessed installation of APF Series horns. It shares the features of Model VP161-R8 with provisions to mount a horn instead of a cone loudspeaker. This offers the economy and convenience of mounting specified re-entrant horns without an adapter. THREE VP60-R 123.4" (324mm) 10" (254mm) 111.4" (286mm) 1.4" (6mm) 1" (12mm) VP161 Series 3.4" (19mm) 103.4" (237mm) BAFFLE SPECIFICATIONS MOUNTS HORN OUTSIDE MOUNTS MODEL LOUDSPEAKER ADAPTER DIMENSIONS ENCLOSURE** (OR) MTG. RING WEIGHT VP60-R 8" (203mm) FAMT-6* 123.4" (324mm) Dia. (T)95-8 Series, 96-8 Series, 75-8(E1)(E2), 2.8 Lbs. (1.3 kg.) x 1" (25mm) Deep CS95-8, Q408 76-8 VP161-R4 4" (102mm) — 193-8, 193-8-5 2.6 Lbs. (1.1 kg.) VP161-R8 8" (203mm) FAMT-6* SE161-R(6), L20-213*** 2.6 Lbs. (1.1 kg.) 103.4" 193-8-5, SE161-R(6) 2.6 Lbs. (1.1 kg.) VP161-APF APF-15 (237mm) SQ. L20-213*** — APF-15T, APF-15TU, Included x 3.4" (19mm) SE161-R6 APF-15TUC Proj. 193-8-6**, L20-213*** * Facilitates installation of APF Series horn. Order Seperately. ** For specifications on recessed enclosures, please refer to individual specification sheets in Section 3. *** For specifications for surface mount enclosure Series SE161. Specifications subject to change without notice AtlasSound.com 1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. TELEPHONE: (800) 876-3333 / FAX (800) 765-3...
Эта инструкция также подходит к моделям:Акустика - SE161-R(6) (76 kb)