Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
The loudspeaker system shall include factory assembled loudspeaker, IP addressable PCB amplifier/ control and metal baffle.The loudspeaker shall have a 10oz (260g) ceramic magnet and a seamless cone. Frequency response range shall be 86Hz to 8kHz (-3dB). Sensitivity shall be 94dB average. Voice coil former shall be black anodized aluminum to help dissipate heat, have an impedance of 8 Ohms and a diameter of 1” (25mm). The IP addressable PCB amplifier/control shall be mounted to the rear of the loudspeaker baffle via concealed weld studs. The amplifier / control PCB shall be capable of producing 9 Watts RMS with a minimum of 9VDC power provided either locally or via Cisco IEEE 802.3AF compliant POE switches. Interconnect shall be via female RJ-45 connector mounted to the PCB. All control functionality of the PCB amplifier shall be determined via software. The metal loudspeaker baffle overall dimensions shall be 11.5” (292mm) wide by 11.5” (292mm) tall. Baffle construction shall be of 18 gauge cold rolled steel. Finish shall be Atlas Sound neutral white electrostatic powder coat. Optional enclosures shall include models SEA-I8S surface mount angled enclosure for I8S - neutral white finish, SEST-I8S surface mount straight enclosure for I8S - neutral white finish and FEST-I8S flush mount straight enclosure for I8S - reclaimed powder coat finish. Loudspeaker Specifi cations Speaker Size 8" (203mm) Power Handling 15W Sensitivity (SPL @ 1W/1M) 94dB Frequencey Response1 86Hz to 8kHz Dispersion2 52.5° Cone Material Treated Paper Surround Material & Dampening Dampened self-storage Flux Density 10,600 Gauss, 1.06 Tesla Magnet Weight Nominal, 10oz (260g) Basket Material Stamped, Plated 20 ga. CRS Voice Coil Diameter 1" (25mm) Voice Coil Material Cooper Voice Coil Former Material Black Anodized Aluminum Voice Coil Winding Width 0.225 (6mm) Top Plate Thickness .239 (96mm) Weight 32oz (908g) Diameter &Depth 8.125 (206mm) Dia. & 2.875" (73mm) D Mounting Dimensions 7.625" (194mm) Bolt Circle 1. Measured in reccomended enclosure 2. 3dB down point, 2 kHz octave band Microphone Specifi cation Microphone Type Omni directional subminiature electret Condenser Diameter 1/4" (6mm) Baffl e Specifi cations Baffle material 18 gauge CRS Overall Width x Height 11.5" (292mm) Square Depth - Front of baffle to rear of speaker 4.21" (107mm) Depth - Rear of baffle to rear of speaker 4.07" (103mm) Color White Amplifi er/Controller Specifi cations Power Rating 9W RMS into 8. load with 9VDC in Inputs RJ-45 female on PCB accessable from rear of baffle Outputs 2 wire main ± terminated to loudspeaker Power Source Cisco IEEE 802.3AF compliant POE network switches local 12-18VDC PSU Dimensions 4.25" (108mm) by 7.25" (184mm) Mounting 4 holes to weld studs on baffle (factory assembled) Network Control Berbee Informacast on multicast enabled networks Specifications subject to change without notice 1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. TELEPHONE: (800) 876-3333 / FAX (800) 765-343...
Эта инструкция также подходит к моделям:Акустика - SEST-IH (292.59 kb)
Акустика - FEST-18S (292.59 kb)
Акустика - SEA-18S (292.59 kb)
Акустика - SEA-18SC (292.59 kb)