Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
» » If the connection fails, NO CONNECTION is displayed on the display panel. Repeat steps 1 to 11 again. Note • • To enable AirPlay, make sure that your AirPlay device is connected to the same network as the SoundHub. Connect an AirPlay device to the same Wi-Fi network Connect your AirPlay device to the same network as the SoundHub. 1 On your iPod Touch, iPhone, or iPad. select Settings > Wi-Fi. • On your computer, select the list of available wireless networks. 2 Select your router SSID from the list of available wireless networks. 192.168.1.12 EN 6 Use your SoundHub This section helps you use the SoundHub to play audio from connected devices. Before you start • Make the necessary connections described in the quick start guide and the user manual. • Switch the SoundHub to the correct source for other devices. Choose your sound This section helps you choose the ideal sound for your video or music. Sound mode Select predefined sound modes to suit your video or music. 1 Press SOUND MODE repeatedly to select a sound setting within three seconds on the display panel: • AUTO: Automatically select MOVIE or MUSIC based on the sound stream. • MOVIE: Enjoy a cinematic audio experience, specially enhanced for movies. • MUSIC: Recreate the original recording environment of your music, in the studio or at a concert. • NEWS: Hear every word with optimized speech and clear vocals. • GAMING: Enjoy thrilling arcade sounds, ideal for action-packed video games or loud parties. • ORIGINAL: Experience the original sound of your movies and music, without added sound effects. Auto volume Turn the auto volume on to keep the volume constant when you switch to a different source. 1 Press AUTO VOLUME repeatedly to select a setting within three seconds on the display panel: • ON: Turn on auto volume. • OFF: Turn off auto volume. Night mode For quiet listening, decrease the volume of loud sounds when you play discs. Night mode is only available for Dolby encoded DVD and Blu-ray discs. 1 Press NIGHT MODE repeatedly to select a setting within three seconds on the display panel: • ON: Turn on night mode. • OFF: Turn off night mode. Note • • If auto volume is set to ON, you cannot enable the night mode. Synchronize picture and sound If the audio and video are not synchronized, delay the audio to match the video. 1 Press AUDIO SYNC. 2 Within two seconds, press the Navigation buttons ( / ) to change the delay shown on the display panel. 3 Press AUDIO SYNC again to exit. Surround sound mode Experience an immersive audio experience with surround sound modes. 1 Press SURR. SOUND repeatedly to select a setting within three seconds on the display panel: • AUTO: Surround sound based on the audio stream. • STEREO: Two-channel stereo sound. Ideal for listening to music. • 360SOUND: Surround sound for best cinematic experience. Note • • If you play a source with DTS, DTS is displayed on the display panel for two seconds. • • If you play a source with Dolby, DOLBY D is displayed on the display panel for two seconds. EN Equalizer Change the high frequency (treble) and low frequency (bass) settings of your SoundHub. 1 Press TREBLE +/- or BASS +/- within three seconds to change the frequency shown on the display panel. MP3 player Connect your MP3 player to play your audio files or music. What you need • An MP3 player. • A 3.5mm stereo audio cable. Play music 1 Connect the MP3 player to the SoundHub as described in the Quick start guide. 2 Press MUSIC iLINK. » » I-LINK is displayed on the display panel. 3 Press the buttons on the MP3 player to select and play audio files or music. Play audio from an AirPlay device Your SoundHub has an integrated AirPlay receiver that lets you stream music wirelessly from the Airplay enabled device. Before you start • Connect the AirPlay device to the same Wi-Fi network as the SoundHub (see 'Connect to a Wi-Fi network' on page 8). 1 On your iPod Touch, iPhone, or an iPad, open iPod (iPod). • On a computer, open iTunes 10.2 and above. 2 Tap or click the AirPlay icon. 3 Select PHILIPS SoundHub (Philips SoundHub) from the list. 4 Select and play audio file from your AirPlay device. EN 5 To control play from your AirPlay device, use the play buttons on your AirPlay device. 7 Change settings This section helps you to change the settings of your SoundHub. Caution • • The settings are already configured for optimal performance. Unless you have a reason to change a setting, we recommend that you keep the default setting. Setup menu options and settings Setup menu option Setting for the option SUBW VOL +5, +4, +3, ..., 0, ..., -3, -4, -5 DISPLAY BRIGHT DIM 1 DIM 2 SLEEP OFF, 15 MIN, 30 MIN, 45 MIN, 60 MIN WIFI WPS BROWSER SETUP IP ADDR VERSION RESET DEFAULT SETTINGS 1 Press SETUP repeatedly to cycle through the options on the display panel. 2 Select an option, and then press OK. 3 Press the Navigation buttons ( / ) to select a setting for the option, and then press OK. Note • • If you do not press a button within ten seconds, the...