Оценок - , средний балл:
(
)
)
Производитель: Sony
Размер: 1.2 mb
Название файла: 4400213811.pdf
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
Replace the battery pack separate collection systems) otherwise specified by the text or illustrations. when its duration becomes half the usual period, even after General If you have any questions or problems concerning your Power source charging it fully. The power does not turn on when the AC adaptor is unit, please consult your nearest Sony dealer. Note This symbol on the product or on its packaging indicates General information connected. . The rechargeable battery pack is not a commercially Auto power off . Make sure the AC adaptor is connected to the wall outlet that this product shall not be treated as household waste. available product. To purchase rechargeable battery pack After playback of the music (from an iPod on the Dock, firmly. Instead it shall be handed over to the applicable collection (NH-300RDP), consult your nearest Sony dealer. Bluetooth connection, or optional component connected point for the recycling of electrical and electronic The rechargeable battery is depleted. to the AUDIO IN jack) has finished, and if no operation is equipment. By ensuring this product is disposed of . Connect the AC adaptor to charge the battery. To replace the rechargeable performed for about 20 minutes, the unit will correctly, you will help prevent potential negative Operating Instructions GB Specifications There is no sound. automatically turn off. battery Personal Audio consequences for the environment and human health, . Adjust VOLUME +/. (VOL +/. on the remote). which could otherwise be caused by inappropriate waste Notes 1 Remove the screw of the battery compartment at handling of this product. The recycling of materials will iPod Noise is heard. . While the unit is turned on, if no operation is performed the bottom of the unit, and open the lid. Docking System help to conserve natural resources. For more detailed DC out: 5 V . Ensure that the unit is not near in-use portable phones, for more than about 30 seconds, the display turns off. In MAX: 2.1 A etc. information about recycling of this product, please contact this case, press SOUND to turn on the display again. your local Civic Office, your household waste disposal Bluetooth The power will not turn on when the AC adaptor is . The unit cannot be turned on with the remote when the service or the shop where you purchased the product. disconnected. AC adaptor is disconnected. Output Applicable accessory: Remote control. . The Power Off Hold function may be set. In this case, Bluetooth Specification Power Class 2 To use the AC adaptor cancel the Power Off Hold function. (See “Power Off Disposal of waste batteries (applicable Maximum communication range Hold function.”) 1 Connect the supplied AC power cord to the AC in the European Union and other Line of sight approx. 10 m*1 . The rechargeable battery may be depleted. In this case, adaptor. European countries with separate Frequency band connect the AC adaptor to charge the battery. (See “To 2 Connect the AC adaptor to the DC IN 20V jack collection systems) 2.4 GHz band (2.4000 GHz – 2.4835 GHz) use the AC adaptor.”) on the back of this unit firmly and plug it into a “ERROR” appears in the display and the unit turns off Communication System 2 Disconnect the connector of the battery pack and automatically. wall outlet. This symbol on the battery or on the packaging indicates Bluetooth Specification Version 2.1 + EDR (Enhanced Data Rate) . If this symptom occurs frequently, consult your nearest pull it out. that the battery provided with this product shall not be Note on the AC adaptor Sony dealer. treated as household waste. Compatible Bluetooth Profiles*2 . Use the supplied Sony AC adaptor only. The polarity of On certain batteries this symbol might be used in A2DP (Advanced Audio Distribution Profile) the plugs of other manufacturers may be different. When using an iPod on the Dock combination with a chemical symbol. The chemical AVRCP*3 (Audio/Video Remote Control Profile) Failure to use the supplied AC adaptor may cause the symbols for mercury (Hg) or lead (Pb) are added if the unit to malfunction. Supported codec*4 There is no sound. battery contains more than 0.0005% mercury or 0.004% SBC (Subband Codec) . Make sure the iPod is connected firmly. lead. *1 The actual range will vary depending on factors such as obstacles . Make sure that the function for iPod is activated. By ensuring these batteries are disposed of correctly, you between devices, magnetic fields around a microwave oven, Operation is not performed. will help prevent potentially negative consequences for the static electricity, reception sensitivity, aerial performance, . Make sure the iPod is connected firmly. environment and human health which could otherwise be operating system, application software, etc. caused by inappropriate waste handling of the battery. The . Check that the iPod is compatible with this unit. (See 3 Confirm that charging has started. 3 Insert a new battery pack and connect its *2 Bluetooth standard profi...
Эта инструкция также подходит к моделям:- ()