Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
If the details, see the user’s guide of your iPod. . If pairing is not complete, start over from step 3. . communication between devices. volume is still too low, adjust the volume of the connected . To pair with another iPod, repeat steps 1 to 5. equipment. *3 Some operations may not be available due to different iPod . In step 3, if a double-beep sound is not heard or the Bluetooth . When playing an external component connected to the AUDIO IN models. indicator does not flash quickly, press and hold again. jack, stop playback of your iPod. Operating an iPod by wireless . If you turn off the unit or the iPod before the Bluetooth connection *4 Codec: Audio signal compression and conversion format . Disconnect the audio connecting cable when audio-in is not in use. is complete, pairing information will not be memorized, and pairing Docking Tray *5 Subband Codec will not be completed. music streaming . If Passcode input is required in the display, input “0000.” By using the Bluetooth connection, you can listen to the . Operation of Bluetooth devices other than iPod is not guaranteed. Troubleshooting General sound from an iPod with the unit wirelessly. Speaker To listen to the sound Approx. 7.6 cm dia. 4 . Keep the iPod and the unit within 10 meters of each Input other for this operation.General AUDIO IN jack (o 3.5 mm stereo minijack) Check the following before operating the unit. Power output The power is not on. . The Bluetooth of your iPod is on. . Pairing of the unit and your iPod is complete, if pairing is not . Make sure the AC power cord is connected to the wall outlet firmly. 20 W + 20 W (at 1% harmonic distortion) completed, perform pairing again. (Refer to “To pair with an iPod”) Power requirements There is no audio. 1 Press ... to turn on the unit. DC IN 20V . Adjust VOLUME +/. (VOL +/. on the remote commander). Dimensions 2 Press to turn on the Bluetooth. The last connected iPod will be reconnected Approx. 356.0 mm . 158.3 mm . 151.9 mm (w/h/d) Noise is heard. Ensure that the unit is not in the vicinity of in-use portable phones, On pairing automatically.. (incl. projecting parts and controls) What is pairing? If you connect another already-paired iPod model etc. Mass . Disconnect the audio connecting cable. Bluetooth devices need to be “paired” with each other when Bluetooth is disconnected, select the model Approx. 1.8 kg beforehand. name of this unit from your iPod. (Perform steps 4 to The two different music sources will be mixed Supplied accessories Once Bluetooth devices are paired, there is no need for 5 under the title “To pair with an iPod.”) together during playback. Remote commander (1) pairing again, unless pairing information is deleted. . Stop playback of your iPod or external component. 3 Select your desired music, video, game, etc., to play on AC power adaptor (1) On Bluetooth indicator your iPod. For details, refer to the user’s guide of your The ... button indicator flashes. AC power cord (1) Status Bluetooth indicator iPod. . The ... button indicator flashes when the remote commander’s Universal Dock Adapter . for iPhone (1) command is received. In this case, it does not mean any error or Universal Dock Adapter . for iPhone 3G/iPhone 3GS (blue) Tips fault. . When the last connected iPod is not reconnected automatically, (1) . If the unit often turns off automatically after flashing, even though Bluetooth off Off press .. If it is still not reconnected, perform steps 4 to 5 under Universal Dock Adapter . for iPhone 4 (1) the AC power cord is reconnected, consult your nearest Sony dealer. the title “To pair with an iPod.” Bluetooth on but not Flashes slowly Design and specifications are subject to change without . You can charge your iPod on the dock while listening to music with connected Bluetooth connection. When using an iPod on the Dock notice. Pairing mode Flashes quickly There is no audio. To finish listening . Make sure the iPod is connected firmly. Before using the unit Connected or communicating Lights up Terminate the Bluetooth connection by any of the . Make sure Bluetooth is turned off. Otherwise, press to turn off Compatible iPod/iPhone operations below. Bluetooth. To pair with an iPod . Press to turn off the Bluetooth. (Bluetooth indicator turns off.) To turn on/off the unit Keep the iPod and the unit within 1 meter of each other . Turn off the unit. Operation is not performed. models Press ... (power). for this operation. . Turn off the iPod. . Make sure the iPod is connected firmly. The compatible iPod/iPhone models are as follows. The ... button indicator will light up in green when the 1 Press ... to turn on the unit. . Operate the iPod to terminate the connection. The iPod does not charge. Update software of your iPod/iPhone to the latest version For details, refer to the user’s guide of your iPod. unit is turned on. to turn on the Bluetooth when the Bluetooth . Make sure the iPod is connected firmly. before using it with this unit. indicator is off. . Make sur...