Оценок - 2, средний балл: 4.5
(
)
)
|
К этому устройству также есть другие инструкции:
Акустика - SA-NS410 (2.39 mb)
Акустика - SA-NS410 (2.38 mb)
Акустика - SA-NS410 (2.39 mb)
Акустика - SA-NS410 (6.08 mb)
Фрагмент инструкции
Green: The unit is turned on. Amber: The unit is in the network standby mode. Red: The unit is in the standby mode. E AUDIO IN button, indicator1) Press to switch the audio input on or off. Lights in green when the audio input is on. F UPDATE button, indicator Press to start updating the software of the unit (page 36). Indicates the update status of the unit. Green (lit): The unit can be updated. Green (flashing): The unit is updating. Red (flashing): An error has occurred. Not lit: The unit does not need updating. G LINK indicator Indicates the connection status of the wired/wireless LAN. Green: Wireless connection (page 20). Amber: Wired connection (page 24). Red: The following status have occurred. – This unit cannot find the wireless LAN access point. – The security method/password selected for the access point is wrong. – An error has occurred. Not lit: The wireless network setting process is not finished. H VOL +2)/– buttons Use to adjust the volume. The illumination indicator flashes rapidly when the volume level is set to either minimum or maximum. 1)Home network/AirPlay/Internet music streaming is selected automatically when the AUDIO IN indicator is off. 2)The VOL+ button has a tactile dot. Use it as a reference point for operations. 11GB Back Back I DC IN terminal Use to connect the supplied AC adaptor (page 17). Rated output voltage of an AC adaptor: DC 18 V,2.6 A Note The supplied AC adaptor and AC power cord are exclusive for this unit. Do not use an AC adaptor not supplied with this unit. J WPS button Use to make the network settings for the WPS push button configuration (page 23). K AUDIO IN terminal Use to connect the audio output jack of an external component. L (LAN) port Use to connect the network (LAN) cable (not supplied). M NETWORK STANDBY / STANDBY switch Switch between the network standby mode and the standby mode (page 19). N ALL RESET button (Bottom) Press and hold until all indicators light while the unit is being turned on and reset to its factory default settings. Use a thin object, such as a small pin. The previously registered settings or information will be reset. Note Network settings are also reset when you press ALL RESET button. ALL RESET button Bottom 12GB Main unit of SA-NS310 Main unit of SA-NS310 For details on each indicator, see “Indicator information” (page 47). Getting Started A PARTY STREAMING indicator Indicates the PARTY STREAMING status (page 35). Green: The unit is having a PARTY as PARTY host. Amber: The unit has joined a PARTY as PARTY guest. Red: An error has occurred. B PARTY button Press to use the PARTY STREAMING function (page 35). Tip This button also receives signals from a remote control. Aim the remote control at this point. The remote signal reception of this unit may not work correctly when the surface of this button is dirty. C Illumination indicator Indicates the playback status of audio content. Blue (lit): The unit has stopped playing back a...
Эта инструкция также подходит к моделям:Акустика - SA-NS310 (2.18 mb)