Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Surround sound mode Experience an immersive audio experience with surround sound modes. Press SURROUND repeatedly to switch surround mode on or off. »»When surround mode is on, the SURR on the front panel lights up. Night mode For quiet listening, decrease the volume of loud sounds when audio is played. Night mode is only available for Dolby Digital soundtracks. 1 Press and hold SURROUND for three seconds to turn night mode on or off. »»When night mode is turned on, the AUX indicator on the front panel blinks twice. English EN »»When night mode is turned off, the MUSIC iLINK indicator on the front panel blinks twice. MP3 player Connect your MP3 player to play your audio files or music. What you need • An MP3 player. • A 3.5mm stereo audio cable. Play music 1 Connect the MP3 player to the SoundBar as described in the Quick start guide. 2 Press MUSIC iLINK. »»MUSIC iLINK indicator on the front panel lights up. 3 Press the buttons on the MP3 player to select and play audio files or music. Play audio through Bluetooth Through Bluetooth, connect the SoundBar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through your SoundBar speakers. What you need • A Bluetooth device which supports Bluetooth profile A2DP, and with Bluetooth version as 3.0 + EDR. • The operational range between the SoundBar and a Bluetooth device is approximately 10 meters (30 feet). 1 Press Bluetooth on the remote control to switch the SoundBar to Bluetooth mode. »»The Bluetooth indicator blinks. 2 On the Bluetooth device, switch on Bluetooth, search for and select Philips CSS2133B to start connection (see the user manual of the Bluetooth device on how to enable Bluetooth). »»During connection, the Bluetooth indicator blinks. 3 Wait until you hear a beep sound from the SoundBar. »»When the Bluetooth connection succeeds, and the Bluetooth indicator lights up. »»If the connection fails, the Bluetooth indicator blinks continually. 4 Select and play audio files or music on your Bluetooth device. • During play, if a call is coming, music play is paused. Play resumes when the call ends. 5 To exit Bluetooth, select other source. • When your switch back to Bluetooth mode, Bluetooth connection remains active. Note ••The music streaming may be interrupted by obstacles between the device and SoundBar, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency. ••If you want to connect your SoundBar with another Bluetooth device, press and hold Bluetooth on the remote control to disconnect the currently connected Bluetooth device. ••Philips does not guarantee 100% compatibility with all Bluetooth devices. Auto standby When playing media from a connected device, the SoundBar automatically switches to standby if: • no source button is pressed for 30 minutes, and • no audio playback is detected from a connected device. EN Apply factory settings You can reset your SoundBar to the default settings programmed at the factory. 1 Press BASS+, VOL-, and Treble+ within three seconds. »»When the factory settings restore is complete, the SoundBar automatically switches off and restarts. 5 Wall mount Note ••Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in accident, injury or damage. If you have any query, contact Philips Consumer Care in your country. ••Before wall mounting, make sure the wall can support the weight of your SoundBar. ••Before wall mount, you need not remove the two rubber feet at the bottom of the SoundBar, otherwise the rubber feet cannot be fixed back. Screw length/diameter Depending on the type of wall mounting your SoundBar, make sure that you use screws of a suitable length and diameter. > 25mm3-4mm 4mm For information about how to wall mount your SoundBar, see the quick start guide. English EN 6 Product specifications Note ••Specifications and design are subject to change without notice. Amplifier • FTC total output power: 34W • Left + Right: 16W (1%THD, 4ohm, 300Hz-20kHz) • Subwoofer: 18W (1%THD, 8ohm, 40Hz-70Hz) • RMS total output power: 60W (+/- 0.5 dB, 30% THD) • Frequency response: 20 Hz-20 kHz / ±3 dB • Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) • Input sensitivity: • AUX: 600 mV • Music iLink: 250 mV Audio • S/PDIF Digital audio input: • Coaxial: IEC 60958-3 • Optical: TOSLINK Bluetooth ••Bluetooth profiles: A2DP ••Bluetooth version: 3.0 + EDR Main unit ••Power supply: 110-127 V~, 60 Hz ••Power consumption: 20 W ••Standby power consumption: . 0.5 W ••Speaker impedance: 4 ohm woofer, 4 ohm tweeter ••Speaker drivers: 25 x 120 mm (1 x 5") woofer, 38 mm (1.5") tweeter ••Frequency response: 150 Hz-20 kHz ••Dimensions (WxHxD): 708 x 47 x 65 mm ••Weight: 1.1 kg Subwoofer • Impedance: 8 ohm • Speaker drivers: 130 mm (5.25") woofer • Frequency response: 20 Hz-150 Hz • Dimensions (WxHxD): 165 x 240 x 295 mm • Weight: 2.6 kg ...