Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
If you listen to an FM station with RDS signal, the station name is displayed. 1 Tune to an RDS station. 2 Press INFO/MENU repeatedly to scroll through the following information (if available): »»Radio text »»Program type such as [NEWS] (news), [SPORT] (sport), [POP M] (pop music)... »»Station name »»Mono/stereo Use FM menu 1 In FM mode, press and hold INFO/MENU to access FM menu. 2 Press / repeatedly to scroll the menu options: • [Scan setting] (scan setting) • [Audio setting] (audio setting) • [System] (system) 3 To select an option, press SELECT. 4 Repeat steps 2-3 if sub-option is available under one option. [Scan setting] (scan setting) • [All stations] (all stations): scan all FM radio stations. • [Strong stations only] (strong stations only): scan stations with strong signals only. [Audio setting] (audio setting) • [Stereo allowed] (stereo allowed): select stereo broadcast. • [Forced mono] (forced mono): select mono broadcast. [System] (system) • [Time] (time): Set time and date. • [Set Time/Date] (set time/date) • [Auto update] (auto update) • [Set 12/24 hour] (Set 12/24 hour) • [Set date format] (Set 12/24 hour) • [Backlight] (backlight): set on level for the backlight. • [Factory Reset] (factory reset): reset all settings to factory default. • [Software Upgrade] (software upgrade): upgrade software through USB socket if available. • [SW version] (software version): display the current software version. Note ••If no button is pressed within 15 seconds, the menu exits. EN 7 Other features Set alarm timer Set alarm Note ••Make sure that you have set the clock correctly. ••You cannot set alarm in standby mode. You can set two alarms. 1 Press and hold AL1/AL2 for 3 seconds to activate alarm setting mode. 2 Press SELECT to confirm. »»The hour digits and alarm icon begin to blink. 3 Press / repeatedly to set the hour. 4 Press SELECT to confirm. Repeat steps 3-4 to set the minute, select an alarm source, and volume. »»When alarm time comes, the selected buzzer, DAB radio, FM radio, or iPod/ iPhone turns on. Tip ••If iPod/iPhone is selected, but no iPod/iPhone is connected, the device switches to buzzer source instead. Activate/deactivate alarm timer Press AL1/AL2 repeatedly to activate or deactivate the alarm timer. »» or is displayed if alarm timer is on and disappears if it is off. • To stop the ringing alarm, press the corresponding AL1/AL2. Snooze alarm When alarm sounds, press SNOOZE repeatedly to choose the snooze time. • 5 minutes • 10 minutes • 15 minutes »»The alarm snoozes and repeats ringing 5/10/15 minutes later if set. Set sleep timer This device can switch to standby mode automatically after a preset period. Press SLEEP repeatedly to select the sleep timer period (in minutes). »»When the sleep timer is activated, is displayed. To deactivate the sleep timer, press SLEEP repeatedly until [Sleep off] (sleep off) is displayed. Play from an external device You can also listen to an external audio device through this device. 1 Press SOURCE to select the MP3 Link mode. 2 Connect the MP3 link cable (not supplied) to: • the MP3-LINK socket (35mm) at the back of the device. • the headphone socket of an external device. 3 Start to play the device (see the user manual of the device). LINEIN EN Adjust display brightness Press BRIGHTNESS repeatedly to select different brightness levels. 8 Product information Note ••Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 2 x 5 W RMS Frequency Response 20-20000 Hz Signal to Noise Ratio >70 dB Total Harmonic Distortion <1% Aux Input (MP3 link) 0.6 V RMS 20 kohm Tuner (FM) Tuning range 87.5-108 MHz Tuning grid 50 KHz Sensitivity - Mono, 26dB S/N Ratio - Stereo, 46dB S/N Ratio <22 dBf <43 dBf Search Selectivity >28 dBf Tuner (DAB) DAB tuning range 174.92-239.20 MHz Speakers Speaker Impedance 4 ohm Sensitivity >82 dB/m/W EN General information Switching power supply adapter Brand name: Philips Model: YJS020F- 1001800D Input: 100-240 V~, 50/60 Hz; 500 mA Output: 10 V 1.8 A Operation Power Consumption 15 W Standby Power Consumption <1 W Dimensions - Main Unit (W x H x D) 283 x 115 x 112 mm Weight - With Packing - Main Unit 220 kg 153 kg 9 Troubleshooting Warning ••Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available. No power ••Ensure that the AC power plug of the unit is connected properly. ••Ensure that there is power at the AC outlet. No sound ••Adjust the volume. No response from the unit ••Disconnect and reconnect the AC power plug, then turn on the unit again. Poor radio reception ••Increase the distance between the unit and your TV or VCR. ••Fully ex...