Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
k DOCK for iPhone/iPod l FM ANT • FM antenna. m DC IN 5V/2A • Power supply socket. n AL1/AL2 R ADIO· BUZZ·iPhone • Select alarm source. Get started Always follow the instructions in this chapter in sequence. Install battery Warning • Risk of explosion! Keep bat teries away from heat, sunshine or fire. Never discard batteries in fire. • Danger of explosion if batter y is incorrectly replaced. Replace only with the same or equivalent type. • The batter y contains chemical substances, so it should be disposed of properly. • Keep children away from the batter y. Note • You can only use AC power as power supply. The lithium CR2032 batter y is only for back-up purpose. • When power is disconnected, the display backlight is off. For fi rst-time use: Remove the protective tab to activate the batter y. B To replace the battery: C Connect power D Caution • Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the back or underside of the clock radio. • Risk of electric shock! When you unplug the AC adapter, always pull the plug from the socket. Never pull the cord. Set clock 1 In standby mode, press and hold SET TIME for two seconds. » The current time is displayed. » The hour and minute digits begin to blink. 2 Press HR+/- and MIN+/- repeatedly to set hour and minute. 3 Press SET TIME again to confi rm. » [12H] or [24H] is displayed. 4 Press HR+/- (or MIN+/-) to select 12/24 hour format. 5 Press SET TIME to confi rm. Note • When iPhone/iPod is connected, the clock radio synchronizes time with iPhone/iPod automatically. Play from iPhone/iPod You can enjoy audio from iPhone/iPod through this clock radio. Compatible iPhone/iPod The clock radio suppor ts these iPod and iPhone models: Made for. • iPod touch (1st, 2nd, 3rd, and 4th generation) • iPod classic • iPod with video • iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation) • iPod with color display • iPod mini • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone Listen to audio from iPhone/iPod E 1 Place the iPhone/iPod in the dock. 2 Press iPhone to enter iPhone/iPod mode. 3 Play audio from the iPhone/iPod. Tip • Press iPhone again to switch to standby mode. Remove the iPhone/iPod F Pull the iPhone/iPod out of the dock. Charge the iPhone/iPod When the clock radio is connected to power, the docked iPhone/iPod star ts charging. Adjust volume G Listen to FM radio Tune to FM radio stations H Tip • Position the antenna as far as possible from T V, VCR , or other radiation source. • For better reception, fully ex tend and adjust the position of the antenna . Note • To turn on/off radio, press RADIO. Store FM radio stations automatically You can store a maximum of 20 FM radio stations. 1 Press RADIO to turn on the radio. 2 Press and hold PROG for two seconds. » The clock radio stores all the available FM radio stations and broadcasts the first available station automatically. Store FM radio stations manually 1 Tune to an FM radio station. 2 Press PROG. » The preset number begins to blink. 3 Press PRESET +/- or TUNING +/- repeatedly to select a number. 4 Press PROG again to confi rm. 5 Repeat steps 1 to 4 to store other stations. Note • To remove a pre-stored station, store another station in its place. Select a preset radio station In tuner mode, press PRESET +/- to select a preset number. Other features Set alarm timer I Set alarm time You can set two alarms to ring at different time. Note • Make sure that you have set the clock correctly. 1 Press and hold AL1/AL2 for 2 seconds to enter alarm setting mode. » The hour and minute digits begin to blink. » or is displayed accordingly. 2 Press HR+/- and MIN+/- repeatedly to set hour and minute. 3 Press AL1/AL2 again to confi rm. Select alarm sound For the alarm sound, you can select buzzer, your last heard radio or played track in iPhone/iPod. Adjust AL1/AL2 R ADIO· BUZ Z·iPhone to select alarm sound for both alarms. Tip • When alarm time arrives and you are listening to radio or audio in iPhone/iPod, buzzer can only be activated as alarm sound. • If you have selected iPhone/iPod source, while no iPhone/iPod is connected, the clock radio switches to buzzer source instead. Activate/deactivate alarm timer 1 Press AL1/AL2 to view alarm settings. 2 Press AL1/AL2 again to activate or deactivate the alarm timer. » or appears if alarm timer is on and disappears if it is off. • To stop alarm, press the corresponding AL1/AL2 . • The alarm repeats ringing for the nex t day. Snooze alarm When alarm sounds, press REPEAT AL ARM . » The alarm snoozes and repeats ringing five minutes later. To adjust alarm inter val (in minutes), press REPEAT AL ARM repeatedly. 10 15 20 25 30 Set sleep timer This clock radio can switch to standby mode automatically after a preset period. Press SLEEP repeatedly to select the sleep timer period (in minutes). »When the sleep timer is activated, appears. To deactivate the sleep timer, press SLEEP repeatedly until [OFF] (off) appears. 30 60 90 120 off Adjust display brightness P...