Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Otherwise, no sound or a loud noise may occur. 18 Step 2: Optional Connections English TV Antenna Satellite Cable BACBack of Cable Box/ Satellite Receiver (example only) Connecting to a Cable Box or Satellite Receiver Option 1 If your Cable Box/Satellite Receiver has only an antenna output socket (RF OUT or TO TV), refer to “Connecting the antenna cables” on page 16 for the complete connection to your TV. Option 2 (as shown on the above illustration) If your Cable Box/Satellite Receiver has a Scart output socket A Keep the existing antenna connection from the Cable Box/Satellite Receiver to your TV. B Use the scart cable to connect the EXT1 TO TV-I/O socket on the recorder to the corresponding SCART input socket on the TV. C Use another scart cable to connect the EXT2 AUX-I/O socket on the recorder to the Scart output socket (or labelled as TV OUT or TO TV) on the Cable Box/ Satellite Receiver. TIPS: The device that connected to the EXT 2 AUX-I/O socket will pass its video/audio signals through the EXT 1 TO TV-I/O socket and display on the TV. 19 Step 2: Optional Connections (continued) English TV VHF/UHF RF IN VHF/UHF RF OUT SCART OUT SCART IN Antenna Satellite Cable ABCBack of a VCR (example only) D Connecting to a VCR or other similar device This connection enables you to record from video tape to HDD and allows the VCR to be used for playback on the TV if the recorder is turned off. IMPORTANT! Your new recorder can replace the VCR for all your recording needs. Just unplug all the connections to your VCR. A Connect the existing Antenna/Satellite/ Cable TV signal (or from the Cable Box/ Satellite Receiver, labelled as RF OUT or TO TV) to the ANTENNA socket on the recorder. B Use the supplied RF coaxial cable to connect the TV socket on the recorder to the antenna input socket (or labelled as VHF/UHF RF IN) on your TV. C Use the scart cable to connect the EXT1 TO TV-I/O socket on the recorder to the corresponding SCART input socket on the TV. D Use another scart cable to connect the EXT2 AUX-I/O socket on the recorder to the Scart output socket (or labelled as TV OUT or TO TV) on the VCR. Helpful Hints: – Most commercial video cassettes and DVDs are copy-protected and therefore cannot be recorded. – Connect the recorder directly to the TV. If there is a VCR or an additional device in between, the picture quality may be poor because of the copy protection system built into this recorder. TIPS: Refer to your optional connected devices’ user manual for other possible connections. 20 Step 2: Optional Connections (continued) English Antenna Satellite Cable CABDSatellite Receiver/ Cable Box EFVCR Connecting to a VCR and Cable Box/Satellite Receiver A Keep the existing antenna connection from the Cable Box/Satellite Receiver to your TV. B Use the supplied RF coaxial cable to connect the antenna output (RF OUT) socket on the Cable Box/Satellite Receiver to the ANTENNA socket on the recorder. C Use another RF coaxial cable to connect the TV socket on the recorder to the antenna input socket on the TV. D Use the scart cable to connect the EXT1 TO TV-I/O socket on the recorder to the corresponding SCART input socket on the TV. E Use another scart cable to connect the EXT2 AUX-I/O socket on the recorder to the Scart output socket (or labelled as TV OUT or TO TV) on the VCR. F Use another scart cable to connect the Scart input socket (or labelled as TV IN or TO DECODER) on the VCR to the Scart output socket (or labelled as TV OUT or TO VCR) on the Cable Box/ Satellite Receiver. TIPS: Refer to your optional connected devices’ user manual for other possible connections. 21 Step 2: Optional Connections (continued) English Connecting to a camcorder You can use the front sockets to copy camcorder recordings. These sockets are located behind the flap on the right hand side which provides convenient connections for a camcorder. Helpful Hints: – You can also use the DV IN to connect this recorder to a Personal Computer that has a DV output socket. The PC must have an IEEE 1394 Firewire connector. – It is not possible to record from this recorder to your camcorder via the DV IN socket on your recorder. Option 1: Using the DV IN socket Use this connection if you have a Digital Video or Digital 8 camcorder. The DV socket conforms to the i.LINK standard. It provides the best picture quality. • Use an i.LINK 4-pin cable (not supplied) to connect the DV IN socket on the recorder to the appropriate DV OUT socket on the camcorder. .. Press DV on the remote control when using this input source. TIPS: Refer to your optional connected devices’ user manual for other possible connections. 22 Step 2: Optional Connections (continued) English OR BA Option 2: Using the S-VIDEO In or VIDEO In socket Use the S-VIDEO connection if you have a Hi8 or S-VHS(C) camcorder. It provides very good picture quality. Alternatively, you can use VIDEO connection if your camcorder has only a single video output (Composite Video, CVBS). It provides good picture...
Эта инструкция также подходит к моделям:Акустика - DVDR5330H/02 (2.88 mb)
Акустика - DVDR3300H/02 (2.88 mb)
Акустика - DVDR5330H/19 (2.88 mb)
Акустика - DVDR3330H/19 (2.88 mb)