Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
If enabled, you can use the remote control to start USB play in the home theater and the TV switches automatically to the correct channel. • [One Touch Standby] : Enables or disables One Touch Standby. If enabled, the home theater can be switched off to standby by a remote control from the TV or other connected HDMI CEC devices. English EN • [System Audio Control] :Enables or disables System audio control. If enabled, follow the instructions on the TV to map the connected devices correctly to the audio connectors of the home theater. The home theater switches automatically to the audio source of the connected device. • [Audio Input Mapping] : Updates audio input mapping if there are new devices connected. 6 Press OK to confirm your choice. Note The connected d • • evices must be connected through HDMI and switched on. 6 Change settings This section helps you to change the settings of your home theater. Caution • • Most of the settings are already configured with the best value for the home theater. Unless you have a specific reason to change a setting, it is best to leave it at the default value. Access the setup menu 1 Press SETUP. » » The following menu appears. Symbol Description [General Setup] [Audio Setup] [Video Setup] [Preference Setup] 2 Select a setup menu, then press OK. See the following sections for information about how to change the settings of your home theater. 3 Press BACK to return to the previous menu, or press SETUP to exit. Note • • You cannot change a setting that is grayed out. EN Change general settings 1 Press SETUP. 2 Select [General Setup], then press OK. 3 Select and adjust the following settings: • [EasyLink Setup] : Sets up EasyLink to enjoy easy controls of all the HDMI CEC compliant devices using a single remote control (see ‘Use Philips EasyLink’ on page 11). • [Display Dim] : Changes the brightness of the display panel. • [OSD Language] : Selects the onscreen display menu language. • [Screen Saver] : Enables or disables screen saver mode. If enabled, the screen enters idle mode after 10 minutes of inactivity (for example, in pause or stop mode). • [Sleep Timer] : Sets a sleep timer to switch the home theater to standby after a specific time. 4 Press OK to confirm your choice. Change audio settings 1 Press SETUP. 2 Select [Audio Setup], then press OK. 3 Select and adjust the following setting: [HDMI Audio] : Enables or disables HDMI audio output for the TV.For settings related to HDMI, the TV must be connected through HDMI. 4 Press OK to confirm your choice. Change video settings 1 Press SETUP. 2 Select [Video Setup], then press OK. 3 Select and adjust the following settings: • [TV System] : Selects a TV system that is compatible with the TV. • [TV Display] : Selects a picture display format to fit the TV screen. • [Picture Settings] : Selects a predefined color setting. • [HDMI Setup] : Selects HDMI video resolution and the wide screen display format for the TV. The Wide Screen Display option is only available for 16:9 wide screen TV display setting. 4 Press OK to confirm your choice. Note The best setting is automatically s • • elected for the TV. If you need to change the setting, ensure that the TV supports the new setting. • • Some video settings depend on the video source, ensure that the TV supports the setting or feature. • • For settings related to HDMI, the TV must be connected through HDMI. Change preference settings 1 Press SETUP. 2 Select [Preference Setup], then press OK. 3 Select and adjust the following settings: • [MP3/JPEG Display] : Displays the MP3/JPEG folders or all the files. • [Version Info.] : Displays the software version for the home theater. • [Default] : Resets the home theater to the default settings programmed at the factory. 4 Press OK to confirm your choice. English EN 7 Update software To check for new updates, compare the current software version of your home theater with the latest software version (if available) on the Philips web site. Check software version 1 Press SETUP. 2 Select [Preference Setup] > [Version Info.], then press OK. The software version is displayed. » » Update software from a USB storage device 1 Check for the latest software version on • Search for your model and click on ‘software&drivers’. 2 Download the software onto a USB storage device. 3 Connect the USB storage device to the home theater. 4 Follow the instructions on the TV to confirm the update. » » When the update is complete, the home theater automatically switches to standby. 5 Disconnect the power cord for a few seconds and then reconnect it. Caution • • Do not turn off the power or remove the USB storage device when the software update is in progress because you might damage the home theater. 8 Product specifications Note • • Specification and design are subject to change without notice. Playback medium USB storage device File Format • • Audio: .mp3, .wma • • Picture: .jpg Amplifier • • Total output power: 300 W RMS • • Frequency ...