Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Contact us Warning • Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never tr y to repair the product yourself. If you have problems using this product, register your product and get suppor t at welcome. If you contact Philips, you will be asked for the model and serial number of your product. The model number and serial number are on the back or bottom of your product. Write the numbers here: Model No. _ _________ _____________ ___ Serial No. _ _______ _____________ ______ 4 EN Your SoundBar Remote control Congratulations on your purchase, and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your SoundBar at Main unit 1 2 3 4 a (Standby-On) • Switch the SoundBar on. • When the SoundBar is on standby, the standby indicator is red. b SOURCE Select an audio source. c +/- (Volume) Increase or decrease volume. d LED indicator Blink when a remote control button is pressed. 56 e Source indicators Light up when the source is selected. f Sound mode indicators • DTS: Light up when you play a source with DTS . • DOLBY D: Light up when you play a source with Dolby Digital. • DVS: Light up when you select DVS mode. 5134762 a (Standby-On) • Switch the SoundBar on. • When the SoundBar is on standby, the standby indicator is red. b Source buttons • AUX: Switch your audio source to the AUX connection. • OPTICAL: Switch your audio source to the optical connection. • COA XIAL: Switch your audio source to the coaxial connection. • MP3 LINK: Switch your audio source to the MP3 link connection. c SURROUND • Switch to DVS mode or stereo mode. • Press and hold to set night mode. d TREBLE +/ Increase or decrease treble. e VOL +/ Increase or decrease volume. f BASS +/ Increase or decrease bass. g MUTE Mute or restore volume. Replace battery Warning • The product/remote control may contain a coin type battery, which can be swallowed. Keep the batter y out of reach of children at all times! Caution • The battery contains perchlorate material, handle it with care. For information see dtsc.ca.gov/hazardouswaste/perchlorate. 312 1 Open the battery compar tment. 2 Inser t one CR2025 batter y, with the polarity (+/-) as indicated. 3 Close the battery compar tment. 6 EN Connect your SoundBar This section helps you connect your SoundBar to a TV and other devices. For information about the basic connections of the SoundBar and accessories, see the Quick star t guide. Note • Refer to the type plate at the back or bottom of the product for identification and supply ratings. • Before you make or change any connections, ensure that all devices are disconnected from the power outlet. Connectors Side connector MP3LINK MP3 LINK Audio input from an MP3 player. Bottom connectors 312 a DIGITAL IN-OPTICAL Connect to the optical audio output on a T V or digital device. b DIGITAL IN-COAXIAL Connect to the coaxial audio output on a T V or digital device. c AUDIO IN-AUX L/R Connect to the analogue audio output on a T V or analogue device. Back connector SUBWOOFER Connect to the subwoofer. Use your SoundBar This section helps you use the SoundBar to play audio from connected devices. Before you start Check that you make the necessary connections. Play audio from TV or other devices Press the Source buttons to select the audio output of the connected device. Adjust the volume To increase or decrease volume, press VOL +/-. • The LED indicator on the front panel lights up for five seconds when the volume is set to maximum. To mute sound, press MUTE. » The LED indicator on the front panel blink continuously. • To restore the sound, press MUTE again or press VOL +/-. Choose your sound This section helps you choose the ideal sound for your video or music. Change treble or bass Change the high frequency (treble) or low frequency (bass) settings of the SoundBar to suit your video or music. Press TREBLE +/- or BASS +/- to increase or decrease treble or bass. •The LED indicator on the front panel lights up for five seconds when the treble or bass is set to maximum. Change virtual surround mode DVS (Dolby Vir tual Speaker) technology creates a highly compelling 5.1-channel listening experience from as few as two speakers. Press SURROUND to switch DVS mode or stereo mode. »In DVS mode, the DVS indicator lights up on the top panel. Change night mode For quiet listening, decrease the volume of loud sounds when you play discs. Night mode is only available for Dolby encoded DVD and Blu-ray discs. Press and hold SURROUND to switch night mode on or off. »When the night mode is on, the indicators dim. 8 EN Apply factory settings You can reset your SoundBar to the default settings programmed at the factor y. In AUX mode, press TREBLE+, VOL-, and BASS+ within three seconds. » When the restore factor y settings process is complete, the standby indicator blinks five times.Your SoundBar automatically switches off and back on again. 6 Wall mount your SoundB...